Search
Search error codes and practical guides across appliances, air conditioners, vehicles and printers
Search the live sitewide library by exact code, brand, family, system or plain-language symptoms to find the closest matching guide quickly.
Find the right guide
Search results are grouped from the live appliance, air-conditioner, OBD, printer, and practical help libraries and ranked by code, title, section, and meaning relevance.
Section
Brand / Source
Search by code, brand, family, system, or plain-language symptoms.
Results are ranked by code, title, section, and relevance.
HP DesignJet 100/110 error 01:10
The electronics module reported a failure.
HP PageWide error 0x6100000B
The printer is too cold and needs time to warm up before it can operate normally.
HP PageWide error 0x6100002D
The printer reported a printer-system failure and could not continue the job.
HP PageWide error 0x6100002E
The printer reported a printer-system failure closely related to the 0x6100002D family.
HP PageWide error 0x610000CC
The printer reported a printer-system failure and needs a restart or power reconnect before it can recover.
HP PageWide error 0x610000D3
The printer detected a printer-system fault and needs a restart before anything else.
HP PageWide error 0x610000FA
An incompatible auxiliary paper tray is attached to the printer.
Canon GX1000 support code 1000
The printer is out of paper or the rear tray did not feed paper correctly.
Canon GX7000 support code 1000
The printer is out of paper or the selected source did not feed correctly.
Canon TS3300 support code 1000
The rear tray is out of paper or paper did not load correctly.
Canon GX1000 support code 1003
The printer is out of paper or paper did not feed correctly.
Canon MB2700 support code 1007
The printer is out of paper or the selected tray did not feed correctly.
Canon MB5400 support code 1007
The printer is out of paper or the selected tray did not feed correctly.
Canon GX4000 support code 1015
The selected paper source is empty or the printer could not start the feed correctly.
Fujitsu General 11 air conditioner error code
Serial communication error.
Lexmark 111.xx printhead error
The printer detected a printhead error and may need service if the fault repeats.
Fujitsu General 12 air conditioner error code
Wired remote controller communication error.
Canon TR4500 support code 1203
The paper output cover was opened during printing.
HP Color LaserJet Pro 4201 / 4301 error 13.02
A paper jam was detected in tray 1.
HP LaserJet Pro 13.02 jam error
Paper is jammed in Tray 1.
HP Color LaserJet Pro 13.02 jam error
Paper is jammed in Tray 1.
HP Color LaserJet Pro 4201 / 4301 error 13.03
A paper jam was detected in tray 2.
HP LaserJet Pro 13.03 jam error
Paper is jammed in Tray 2.
HP Color LaserJet Pro 13.03 jam error
Paper is jammed in Tray 2.
HP Color LaserJet Pro 4201 / 4301 error 13.04
A paper jam was detected in tray 3 or the optional lower tray path.
HP LaserJet Pro 13.08 / 13.09 jam error
Paper is jammed in the toner cartridge or fuser area.
HP Color LaserJet Pro 13.08 / 13.09 jam error
Paper is jammed in the toner cartridge or fuser area.
HP Color LaserJet Pro 4201 / 4301 error 13.08 / 13.09 / 13.14 / 13.15
A paper jam was detected near the rear door or rear output path.
HP Color LaserJet Pro 4201 / 4301 error 13.10 / 13.11 / 13.13
A paper jam was detected in the output bin path.
HP LaserJet Pro 13.10 / 13.11 / 13.13 jam error
Paper is jammed in the output bin path.
HP Color LaserJet Pro 13.10 / 13.11 / 13.13 jam error
Paper is jammed in the output bin path.
HP LaserJet Pro 13.14 / 13.15 jam error
Paper is jammed in the duplexer.
HP Color LaserJet Pro 13.14 / 13.15 jam error
Paper is jammed in the duplexer.
Canon GX1000 support code 1300
Paper is jammed in the printer path.
Canon GX7000 support code 1300
Paper is jammed in the printer path.
Canon MB2700 support code 1300
Paper is jammed in the printer path.
Canon MB5400 support code 1300
Paper is jammed in the printer path.
Canon TS4000 support code 1300
Paper is jammed in the printer path.
Canon TR4500 support code 1300
Paper is jammed in the paper output slot.
Canon GX1000 support code 1303
Paper is jammed in the printer path.
Canon GX4000 support code 1304
Paper is jammed in the printer path.
Canon GX7000 support code 1304
Paper is jammed in the printer path.
Canon GX4000 support code 136A
The printer detected a paper output or transport problem and wants the path checked.
Canon TS5000 support code 1401
The printhead is not installed correctly or is not being recognized.
Canon TS5000 support code 1403
The printhead may be damaged and Canon treats it as a repair case.
Canon GX4000 support code 1405
The printhead or cartridge installation state does not look correct.
Canon GX7000 support code 1405
The printhead or cartridge installation state does not look correct.
Canon TS3300 support code 1430
A FINE cartridge cannot be recognized.
Canon GX1000 support code 1470
A cartridge or printhead assembly is not installed correctly.
Canon GX4000 support code 1476
A tank or cartridge installation problem was detected and the printer wants the consumables checked.
Canon GX7000 support code 147C
A consumables installation or recognition problem was detected.
Samsung Refrigerator Error 14E: Ice Maker Sensor Error — Ice Maker Temperature Out of Range
The refrigerator's ice maker sensor has detected a temperature that is out of the expected operating range for ice production. Ice production has stopped to prevent a partial or slushy ice harvest.
Canon TR4500 support code 15A1
Initial printer setup is incomplete because language or region settings have not been finalized.
Canon TS3300 support code 15A2
A required FINE cartridge is not installed.
Canon TS5000 support code 1680
One or more ink tanks are installed in the wrong positions.
Canon MB2700 support code 1688
An ink cartridge is empty or too low for the printer to continue normally.
Canon MB5400 support code 1688
An ink cartridge is empty or too low for the printer to continue normally.
Canon TS4000 support code 1688
One or more ink cartridges has a problem.
Canon MB2700 support code 1700
The maintenance or absorber system is nearing a service threshold.
Canon TR4500 support code 1702
The ink absorber is almost full and service planning is needed.
GE Washer Error 18: Pump Filter Needs Cleaning
GE washer error 18 usually means the pump filter is restricted and the washer is struggling to move water normally.
Canon TR4500 support code 1871
The cassette is not inserted correctly.
Canon TS3300 support code 1890
Shipping tape or setup materials are still attached inside the printer.
Samsung Dishwasher Error 1E: Filter Clog or High Temperature Heater Error
On WaterWall models, 1E indicates the filter is clogged and restricting water flow. On rotary spray arm models, 1E indicates the water temperature has risen above safe operating limits or the high-temperature heater is faulting.
Lexmark 200 / 201 / 202 paper jam
A paper jam was detected in the middle or front paper path.
Canon MB2700 support code 2111
The loaded paper size does not match the printer or job setting.
Canon MB5400 support code 2111
The loaded paper size does not match the printer or job setting.
Canon TS3300 support code 2114
The paper size in the print settings does not match the paper size registered on the printer.
Samsung Refrigerator Error 21E: Freezer Fan Not Running
Samsung refrigerator error 21E usually means the freezer evaporator fan is not spinning normally, so cold air is not circulating through the cabinet as it should.
LG Refrigerator Error 22: Compressor Relay Problem
The refrigerator has detected a fault with the compressor relay circuit. This is closely related to error 33 and indicates the same class of compressor start or run fault on certain LG model ranges.
Samsung Refrigerator Error 22E: Fridge Fan Not Operating
Samsung refrigerator error 22E usually means the fresh-food compartment fan is not circulating cold air correctly.
Lexmark 232.02 duplex paper jam
A duplex print jam was detected in the input path.
Lexmark 232.05 duplex paper jam
A duplex print jam was detected and the sheet did not clear the sensor correctly.
Fujitsu General 24 air conditioner error code
Connection unit number error.
Lexmark 250.18 paper jam or MPF load error
The printer thinks the MPF tray is not loaded or aligned correctly.
Fujitsu General 26 air conditioner error code
Indoor unit address setting error.
Lexmark 29.xx packing material present
Packing material is still present on one or more installed supplies.
HP LaserJet Pro 31.13 jam error
Paper is jammed in the document feeder.
HP Color LaserJet Pro 31.13 jam error
Paper is jammed in the document feeder.
HP Color LaserJet Pro 4201 / 4301 error 31.13.01 / 31.13.02
A document feeder jam was detected during scanning or copying.
Lexmark 31.40 missing or unresponsive toner cartridge
The toner cartridge is missing or not responding correctly.
Lexmark 31.46 toner cartridge error
The printer does not detect the toner cartridge correctly.
Lexmark 31.60 missing or unresponsive imaging unit
The imaging unit is missing or not responding correctly.
Lexmark 31.66 imaging unit error
The printer does not detect the imaging unit correctly.
LG Refrigerator Error 33: Compressor Relay Problem
The refrigerator has detected a fault with the compressor start relay or the compressor circuit. The compressor may not be starting or running correctly, putting the cooling system at risk.
Samsung Refrigerator Error 33E: Ice Pipe Heater Error — Ice Pipe Heater Not Functioning
The heater that prevents the ice maker's water supply tube from freezing has been detected as faulty. Without this heater, the water line will freeze and the ice maker will stop producing ice.
HP DesignJet 100/110 error 35:01
The cleanout assembly was not detected while loading media.
Samsung Refrigerator Error 39E: Ice Maker Function Error — Ice Maker Cycle Not Completing
The ice maker has failed to complete its harvest cycle within the expected time. The ice maker motor or its control system is not finishing the cycle of making and ejecting ice cubes.
Samsung Dishwasher Error 3C: Pump Operation Error — Wash Pump Failed
The dishwasher's wash pump has failed or is not operating within normal parameters. The pump is responsible for circulating water through the spray arms during the wash cycle. When 3C appears, the pump cannot move water and the wash cycle stops.
Samsung Dryer Error 3C: Motor Error or Dry Time Error
The dryer has detected a fault with the drum drive motor (3C) or the drying cycle has exceeded the maximum allowed time without reaching the target dryness level (oD).
Samsung Washing Machine Error 3C: Motor Error
The washer has detected a fault in the drum drive motor or its control circuit. The motor is not operating within expected parameters.
Samsung Dishwasher Error 3E: High Temperature Water Supply Error
The incoming water supply to the dishwasher exceeds the safe operating temperature limit (above 176°F / 80°C). Samsung dishwashers heat their own water and are designed for a cold or warm supply — not a supply that is already at high temperature.
Samsung Refrigerator Error 40E: Ice Room Fan Error — Ice Maker Compartment Fan Not Operating
The fan inside the ice maker compartment is not operating. This fan circulates cold air through the ice maker area to maintain freezing temperatures and assists with ice production.
Fujitsu General 41 air conditioner error code
Room temperature sensor error.
Samsung Refrigerator Error 41C: Software or System Error — Family Hub Display Fault
The refrigerator has detected a software or system-level fault. On Family Hub models this typically relates to the touchscreen display or the internal computer. The refrigerator's cooling system continues to operate independently of the display computer.
Fujitsu General 42 air conditioner error code
Indoor unit heat exchanger middle temperature sensor error.
Samsung Dishwasher Error 4C: Dishwasher Not Filling With Water
Samsung dishwasher error 4C usually means the machine is not getting enough incoming water to fill correctly.
Samsung Washer Error 4C: Washer Not Filling With Water
Samsung 4C usually means the washer is not getting enough incoming water to finish the fill on time.
Samsung Washing Machine Error 4C2: Hot and Cold Supply Hoses Reversed
The washer has detected that the cold water inlet is receiving extremely hot water — the hot and cold supply hoses have been swapped at installation.
Canon TS4000 support code 5B00
The ink absorber is full and printing stops.
Canon TS3300 support code 5B00
A printer error requiring Canon service has occurred.
Samsung Dishwasher Error 5C: Dishwasher Not Draining
Samsung dishwasher error 5C usually means the machine cannot drain water from the tub at the end of the cycle.
Samsung Refrigerator Error 5E: Fridge Defrost Sensor Fault
Samsung refrigerator error 5E usually means the fresh-food defrost sensor is reading outside its normal range.
Samsung Washer Error 5E: Washer Not Draining Properly
Samsung 5E usually means the washer cannot drain water out of the drum fast enough to continue the cycle.
LG Refrigerator Error 67: Door Obstruction or Door Not Closing Correctly
LG refrigerator error 67 usually means a door is obstructed, not closing fully, or not sealing correctly.
Samsung Refrigerator Error 76C: Autofill Water Leak Detected
Samsung refrigerator error 76C usually means moisture has been detected in the Autofill pitcher compartment.
Frigidaire Refrigerator Error 7777: Demo Mode Active — Cooling Disabled
The refrigerator is in Demo Mode (also called Showroom Mode or Display Mode). This mode is used by retailers to run the refrigerator in a store without cooling, to save energy and prevent the compressor from running while the doors are opened repeatedly. In Demo Mode the display, lights, and controls function normally but the compressor and cooling system are completely disabled — food will not stay cold.
Electrolux Refrigerator Error 7777: Demo Mode Active — Cooling Disabled
The refrigerator is in Demo Mode (also called Showroom Mode or Display Mode). This mode is used by retailers to run the refrigerator in a store without cooling, to save energy and prevent the compressor from running while the doors are opened repeatedly. In Demo Mode the display, lights, and controls function normally but the compressor and cooling system are completely disabled — food will not stay cold.
HP DesignJet 100/110 error 79:04
An unexpected generic firmware error occurred.
Samsung Dishwasher Error 7E: WaterWall Reflector Error — Reflector Arm Cannot Move
The WaterWall reflector arm that sweeps back and forth to distribute water across the lower rack cannot complete its full range of motion. This error applies exclusively to Samsung WaterWall dishwasher models — standard rotary spray arm models do not display 7E.
HP DesignJet 100/110 error 81:01
The paper axis shut down, usually because of a jam or blockage.
Samsung Refrigerator Error 83E: Compressor Abnormal Current — Compressor Electrical Fault
The refrigerator's inverter board has detected an abnormal current draw from the compressor. This indicates an electrical fault in the compressor or its control circuitry that puts the compressor at risk of damage.
Samsung Refrigerator Error 84C: Compressor Lock — Compressor Cannot Start
The compressor has locked up and is unable to start its rotation cycle. A locked compressor draws extremely high current briefly before the inverter board shuts it down as a protective measure. Without a working compressor, the refrigerator cannot cool.
Samsung Refrigerator Error 85C: Low Voltage Error — Low Voltage Detected on Power Supply
The refrigerator has detected that the supply voltage from the wall outlet is below its safe operating threshold. This is most commonly triggered by a brief power outage or brownout. The error can typically be cleared without a service call.
Samsung Refrigerator Error 85E: Compressor Under Voltage — Brownout Affecting Compressor
The compressor inverter has detected that the supply voltage is too low to safely operate the compressor. Unlike 85C which is a general low-voltage warning, 85E specifically means the compressor cannot start or run safely under the current voltage.
Samsung Refrigerator Error 86E: Compressor Over Voltage — Power Surge Detected
The compressor inverter has detected that the supply voltage is too high — a power surge condition. The compressor has been disabled to prevent damage to the motor windings and control electronics.
Samsung Refrigerator Error 88 88: Communication Fault — Control Board Boot Error
The refrigerator is displaying a communication or boot fault. This typically occurs when power is disrupted mid-boot, leaving the control board in an inconsistent state. All segments of the display may light up simultaneously as part of this fault.
Samsung Refrigerator Error 8E: Ice Maker Freezer Sensor Error — Ice Maker Temperature Sensor Fault
The ice maker's freezer temperature sensor has returned an out-of-range reading. This sensor tells the ice maker when the freezer is cold enough to begin a harvest cycle. A faulty reading prevents ice production.
Samsung Washing Machine Error 8E: MEMS Vibration Sensor Error
The washer has detected a fault in the MEMS (Micro-Electro-Mechanical System) vibration sensor. This sensor monitors drum vibration to detect imbalance and protect the machine during spin.
Lexmark 920 - 925 service fuser error
The printer reported a fuser service error and may need support if a restart does not clear it.
HP DesignJet 100/110 error 95:00
Printhead alignment failed and the process was cancelled.
Haier Dishwasher Error 999: Control Error — Reset Required
The dishwasher's control board has encountered an error it cannot resolve automatically. The code indicates that the control system needs to be reset to clear the fault and return the machine to normal operation.
Samsung Dryer Error 9C1: Voltage Error — Irregular Power Supply
The dryer has detected an abnormality in the voltage being supplied. The power is either too high, too low, or fluctuating beyond safe operating limits.
Samsung Washing Machine Error 9C1: Voltage Error — Irregular Power Supply
The washer has detected an irregularity in the voltage being supplied — it is either too high, too low, or fluctuating beyond safe operating limits.
Samsung Dishwasher Error 9E: Low Water Level Error — Insufficient Water in Dishwasher
The dishwasher has detected that the water level inside the tub is lower than required for safe operation. The water level sensor cannot confirm that enough water is present for the cycle to run without risk of pump damage or heating element damage.
Daikin A0 air conditioner error code
The system has detected a refrigerant leak.
Fisher & Paykel DishDrawer Error Code A1: No Water Supply
The dishwasher did not receive water within the expected time. A1 and A10 both indicate a water supply problem. Unlike F6, A codes are user-addressable — check the supply before calling a technician.
Fisher & Paykel DishDrawer Error Code A3: Drain Fault — Hose or Filter Blocked
The dishwasher cannot drain properly. A3 and A20 both indicate a drain obstruction. These are user-addressable — check the hose and filter before calling a technician.
Haier Dishwasher Error A6: Tableware Height Exceeded — Drawer Dishwasher
On Haier drawer-style dishwashers, this code indicates that an item in the drawer is too tall and is preventing the drawer from closing properly or blocking the spray arm from rotating. Also displayed as F51 on some models.
Fisher & Paykel DishDrawer Error Code A6: Spray Arm Loose or Detached
The spray arm has come loose or detached during the wash cycle, or water pressure is too low to rotate it correctly. The spray arm must be properly seated to wash dishes effectively.
Fisher & Paykel DishDrawer Error Code A7: Excess Foam Detected — Auto Recovery Triggered
The dishwasher has detected excessive foam (suds) and has triggered an automatic recovery cycle to reduce it. This is caused by incorrect detergent use and is user-addressable.
Samsung Dryer Error AC: Communication Error — Internal Components
The dryer's internal electronic components cannot communicate with each other. A communication breakdown has occurred between the main control board and one or more subsystems.
LG Refrigerator Error Ad: Door Motor Failure — Auto-Close or French Door Motor
The automatic door closure motor (used on French door or InstaView models with a motorized door feature) has stopped working. On models with a door-in-door design, this affects the inner door panel operation. The dr variant indicates the same fault on some model lines.
Epson WF-C5710 / WF-C5790 ADF paper jam
Originals jammed in the automatic document feeder during scanning, copying, or faxing.
Epson ET-5800 / ET-5850 / ET-5880 ADF paper jam
Originals jammed in the automatic document feeder during scanning, copying, or faxing.
Samsung Washing Machine Error AE: Communication Error — Internal Components
The washer's internal electronic components cannot communicate with each other. A communication breakdown has occurred between the main control board and one or more subsystems.
Whirlpool Dryer Error AF: Restricted Airflow — Vent Blockage
The dryer's airflow sensor has detected that exhaust air cannot move through the vent system at the required rate. The vent is partially or fully blocked. Unlike some dryer error codes, AF does not stop the dryer — the machine continues running, but efficiency drops and heat builds up inside the drum. Clean the vent promptly: restricted airflow is one of the leading causes of residential dryer fires in the United States.
Maytag Dryer Error AF: Restricted Airflow or Vent Blockage
Maytag dryer error AF usually means the exhaust vent is restricted and airflow is no longer strong enough for safe drying.
Bosch Cooktop Error All indicators flashing: All Cooktop Indicators Flashing — General Fault
All display indicators on the cooktop are flashing simultaneously, signaling a general system fault. This typically indicates an internal error that the cooktop's self-diagnostic system has detected but cannot pinpoint to a single component.
Thermador Cooktop Error All indicators flashing: All Cooktop Indicators Flashing — General Fault
All display indicators on the cooktop are flashing simultaneously, signaling a general system fault. This typically indicates an internal error that the cooktop's self-diagnostic system has detected but cannot pinpoint to a single component.
Gaggenau Cooktop Error All indicators flashing: All Cooktop Indicators Flashing — General Fault
All display indicators on the cooktop are flashing simultaneously, signaling a general system fault. This typically indicates an internal error that the cooktop's self-diagnostic system has detected but cannot pinpoint to a single component.
Samsung Dishwasher Error AP: Access Point Mode — Dishwasher in Wi-Fi Connection Mode
The dishwasher is in Wi-Fi Access Point mode, ready to be connected to the Samsung SmartThings app. AP is a mode indicator, not a fault. The dishwasher is broadcasting its own temporary Wi-Fi network so a phone can connect directly during setup.
Canon MB5400 support code B203
The printer detected a serious print or controller fault and cannot continue normally.
Canon TS5000 support code B203
A repair-required printer fault occurred and the printer should be powered down.
GE Appliances Oven Error BAD LINE: Incorrect Wiring Detected
The range has detected incorrect wiring at the power supply connection — typically a missing or reversed neutral leg on a 240V circuit. Operating the range with bad line wiring can damage the electronics and creates a shock hazard.
Samsung Dishwasher Error bE: Button Error — Control Panel Key Stuck
The dishwasher's control panel has detected that one or more buttons are continuously pressed. A stuck button prevents the control panel from accepting new inputs, which halts normal operation.
Samsung Dryer Error bE: Jammed Button — Control Panel Key Stuck
The dryer's control panel has detected that one or more buttons are stuck in a continuously pressed state, preventing normal operation.
LG Dishwasher Error bE: Detergent Dispenser or Leveling Error
The dishwasher has detected an issue with the detergent dispenser mechanism or the machine is not level enough for the dispenser door to operate correctly.
Samsung Washing Machine Error bE2: Jammed Button — Control Panel Key Stuck
The washer's control panel has detected that one or more buttons are stuck in a continuously pressed state, preventing normal operation.
Epson ET-3830 / ET-3850 / L6270 borderless ink pad has reached end of service life
The borderless-printing ink pad has reached the end of its service life and support is required.
Epson ET-4950 borderless ink pad has reached end of service life
The borderless-printing ink pad has reached its service limit and support is required.
Epson ET-3830 / ET-3850 / L6270 borderless ink pad nearing end of service life
The borderless-printing ink pad is nearing the end of its service life.
Epson ET-4950 borderless ink pad nearing end of service life
The borderless-printing ink pad is nearing the end of its service life.
GE Appliances Dishwasher Error C1: Drain Pump Running Too Long
The drain pump has been running continuously for more than 2 minutes without the water level dropping as expected. The dishwasher has stopped the pump to prevent motor burnout.
Fisher & Paykel oven Error Code C1: Oven Temperature Exceeded Maximum Safe Limit
The oven cavity temperature has exceeded 305 °C (581 °F) outside of a self-clean cycle. C1 is a critical safety cut-out — the oven will switch all heating off immediately and lock out further operation until the fault is cleared by a technician.
GE Appliances Dishwasher Error C2: Total Drain Cycle Exceeds 7 Minutes
The cumulative pump-out time across the entire wash cycle has exceeded 7 minutes. This indicates a persistent drainage restriction that is causing repeated drain attempts without fully clearing the tub.
GE Dishwasher Error C3: Dishwasher Will Not Drain
GE dishwasher error C3 usually means the machine did not drain water from the tub during the normal drain phase.
GE Appliances Dishwasher Error C4: Float Switch Stuck or Clogged Drain After Power Failure
After a power interruption, the dishwasher filled twice without completing a drain. This indicates either the float switch (overflow protection) is stuck in the raised position, or a blocked drain is preventing water from clearing between fills.
GE Appliances Dishwasher Error C5: Pump-Out Time Too Short
The drain cycle completed in less time than expected, suggesting the pump ran but water did not fully drain — possibly due to a partial obstruction or the drain hose being too short or improperly routed.
GE Appliances Dishwasher Error C6: Water Temperature Too Low
The water entering the dishwasher is below the minimum temperature required for effective washing and sanitizing. The dishwasher may delay the cycle or extend the wash phase while heating the water.
GE Appliances Dishwasher Error C7: Water Temperature Sensor Circuit Inoperative
The dishwasher's water temperature sensor (thermistor) is reporting an open or shorted circuit. The control board cannot read water temperature and has stopped the cycle as a safety measure.
GE Appliances Dishwasher Error C8: Detergent Cup Blocked From Opening
The detergent dispenser door failed to open at the scheduled point in the wash cycle. Detergent was not released into the wash, meaning dishes were washed with plain water.
Brother Cannot Detect message
The printer cannot detect a required consumable or installed part correctly.
Brother Cannot Detect
The printer cannot detect a toner cartridge correctly.
Brother Cannot Print ## message
The printer cannot continue normally and wants a restart or support check.
Brother Cannot Print ##
The machine has an internal mechanical fault.
Brother Cannot Print XX / Print Unable XX
The printer has a mechanical issue or a foreign object is blocking normal operation.
Samsung Washing Machine Error Cb: Calibration Mode Active
The washer is running a calibration cycle to recalibrate its load weight detection sensors. This is a maintenance mode, not a fault.
GE Refrigerator Error CC: Refrigerator Temperature Incorrect
GE refrigerator error CC usually means the fresh-food compartment temperature is not where the control expects it to be.
Samsung Dishwasher Error CE: Communication Error — Control Panel Cannot Communicate Internally
The dishwasher's internal electronic components cannot communicate with each other. A communication breakdown has occurred between the main control board and the display or motor control subsystem, halting the cycle.
LG Washing Machine Error CE: Motor Over-Current Error
The washer has detected that the drive motor is drawing excessive current. The machine has stopped to protect the motor and wiring from damage caused by sustained overcurrent.
LG Refrigerator Error CF: Condenser Fan Feedback Error
LG refrigerator error CF usually means the rear condenser fan is not spinning normally or the control cannot confirm that it is running.
LG Refrigerator Error CH E: High-Side Refrigerant Leak Detected
The refrigerator's leak detection system has identified a refrigerant leak on the high-pressure side of the cooling circuit. Refrigerant is escaping, reducing cooling capacity and potentially posing an environmental hazard.
LG CH05 air conditioner error code
Communication between the indoor and outdoor units is unstable or interrupted.
LG system air conditioner CH05 error code
The indoor and outdoor units are not communicating, often because the outdoor unit has lost power.
LG system air conditioner CH07 error code
Units connected in the same system are running in conflicting operating modes.
LG CH10 air conditioner error code
The indoor unit fan has a fault or is not operating normally.
LG CH38 air conditioner error code
The air conditioner may be low on refrigerant.
LG CH93 air conditioner error code
Communication between indoor and outdoor units is failing, often during test run or when outdoor power is missing.
Bosch Cooktop Error Child Lock: Child Safety Lock Active
The cooktop child safety lock is engaged. All zone and power controls are disabled to prevent accidental operation. This is not an error — it is an intentional safety feature.
Thermador Cooktop Error Child Lock: Child Safety Lock Active
The cooktop child safety lock is engaged. All zone and power controls are disabled to prevent accidental operation. This is not an error — it is an intentional safety feature.
Gaggenau Cooktop Error Child Lock: Child Safety Lock Active
The cooktop child safety lock is engaged. All zone and power controls are disabled to prevent accidental operation. This is not an error — it is an intentional safety feature.
GE Refrigerator Error CI: Check Ice Maker Operation
GE refrigerator error CI usually means the refrigerator has detected an ice maker operating problem.
Bosch Washing Machine Error CL: Child Lock Activated
The Child Lock feature is active. All control panel buttons are disabled to prevent accidental changes or starts.
Samsung Dryer Error CL: Child Lock Active
The child safety lock is engaged. All control panel buttons are disabled and on some models the door is also locked. This is a safety mode, not a fault.
Samsung Washing Machine Error CL: Child Lock Active
The child safety lock is engaged. All control panel buttons are disabled to prevent accidental operation. This is not a fault — it is an intentional safety mode.
LG Dishwasher Error CL: Child Lock Active
The child safety lock is engaged. All control panel buttons are disabled to prevent accidental operation or cycle changes. This is not a fault — it is an intentional safety mode.
LG Dryer Error CL: Child Lock Active
The child safety lock is engaged. All control panel buttons are disabled to prevent accidental operation by children. This is not a fault — it is an intentional safety mode that is straightforward to deactivate.
Frigidaire Dishwasher Error CL: Door Not Closed or Not Latched
Frigidaire dishwasher error CL usually means the door is not fully closed or latched.
Electrolux Dishwasher Error CL: Door Not Closed or Not Latched
Electrolux dishwasher error CL usually means the door is not fully closed or latched.
LG Refrigerator Error CL E: Low-Side Refrigerant Leak Detected
The refrigerator's leak detection system has identified a refrigerant leak on the low-pressure (evaporator) side of the cooling circuit. Cooling capacity is reduced and food safety is at risk.
Samsung Dryer Error Clg: Dryer Vent Is Clogged
Samsung dryer error Clg usually means the exhaust vent is heavily restricted and airflow is no longer safe.
Fisher & Paykel Dryer Error Code CLN cond: Condenser Requires Cleaning (Heat Pump Models)
The condenser on a heat pump dryer requires cleaning. Lint accumulates on the condenser over time, reducing efficiency.
LG Refrigerator Error CO: Communication Error — Main Board to Sub Board
The main control board and one or more sub-boards (such as the display board or inverter board) cannot communicate. The refrigerator's internal electronics have lost contact with each other.
Brother Cover is Open
One of the machine covers is not fully closed or latched.
LG Dishwasher Error CR: Test Mode Active — Service Mode Display
The dishwasher has entered a factory test or service mode. All normal wash cycles are unavailable until the machine is returned to normal operating mode. This is not a hardware fault.
Bosch Refrigerator Error D: Door Ajar Alarm
The refrigerator is displaying 'D' to indicate a door ajar alarm — one or more refrigerator or freezer doors has been open longer than the configured alarm threshold (typically 60–90 seconds).
Thermador Refrigerator Error D: Door Ajar Alarm
The refrigerator is displaying 'D' to indicate a door ajar alarm — one or more refrigerator or freezer doors has been open longer than the configured alarm threshold (typically 60–90 seconds).
Gaggenau Refrigerator Error D: Door Ajar Alarm
The refrigerator is displaying 'D' to indicate a door ajar alarm — one or more refrigerator or freezer doors has been open longer than the configured alarm threshold (typically 60–90 seconds).
LG Dryer Error D80: Exhaust Duct Is Mostly Blocked
LG dryer error D80 usually means the exhaust duct is heavily restricted and airflow is no longer safe or efficient.
Samsung Dryer Error dC: Door Error — Door Not Detected as Closed
The dryer cannot detect that the door is properly closed and latched. The cycle will not start or has been interrupted because the door lock cannot confirm a secure position.
Samsung Washing Machine Error ddC: Add Door Not Closed — FlexWash Models
On Samsung FlexWash models with a secondary Add Door (the small door for adding garments mid-cycle), the Add Door is not detected as properly closed and locked.
Bosch Cooktop Error dE: Demonstration Mode or Child Lock Active
The cooktop display shows 'dE' when the unit is in demonstration mode (display mode without heating) or when the child safety lock is engaged, depending on the model.
Samsung Washer Error dE: Door Not Detected as Closed
Samsung washer error dE usually means the machine does not think the door is closed or locked properly.
LG Dryer Error dE: Door Not Closed
The dryer cannot confirm that the door is properly closed and latched. The cycle will not start or has paused because the door switch is not detecting a closed door.
GE Refrigerator Error dE: Defrost System Not Operating
GE refrigerator error dE usually means the automatic defrost cycle has not run as expected.
GE Appliances Washing Machine Error dE: Lid Is Open
The top-load washer lid is detected as open or not fully latched. The cycle will not start or continue until the lid is properly closed.
Thermador Cooktop Error dE: Demonstration Mode or Child Lock Active
The cooktop display shows 'dE' when the unit is in demonstration mode (display mode without heating) or when the child safety lock is engaged, depending on the model.
Gaggenau Cooktop Error dE: Demonstration Mode or Child Lock Active
The cooktop display shows 'dE' when the unit is in demonstration mode (display mode without heating) or when the child safety lock is engaged, depending on the model.
LG Washing Machine Error DE: Door Not Locking — Door Error
The washer cannot confirm that the door is properly closed and locked. The cycle will not start, or has paused, because the door latch or lock assembly is not detecting a secure closure.
Whirlpool Washing Machine Error dET: Detergent Cartridge Not Detected
The washer expected to find a detergent cartridge in the dispenser but could not detect one. This code appears on models with an automatic detergent dispensing system (such as the Load & Go dispenser). The washer will not start the cycle until the cartridge issue is resolved.
Maytag Washing Machine Error dET: Detergent Cartridge Not Detected
The washer expected to find a detergent cartridge in the dispenser but could not detect one. This code appears on models with an automatic detergent dispensing system (such as the Load & Go dispenser). The washer will not start the cycle until the cartridge issue is resolved.
Haier Refrigerator Error DF: Defrost Cycle Active — Normal Operation
The refrigerator is running its scheduled automatic defrost cycle. DF is not an error — it is a status indicator displayed during normal defrost operation. The defrost cycle runs automatically every 8 to 12 hours to prevent frost buildup on the evaporator coils.
LG Refrigerator Error dH: Defrost Heater Taking Too Long
LG refrigerator error dH usually means the automatic defrost cycle is not clearing frost from the evaporator in the expected time.
Frigidaire Refrigerator Error DISP: Ice Jam in Dispenser Chute
Frigidaire refrigerator error DISP usually means the ice dispenser chute is jammed with clumped or wedged ice.
Electrolux Refrigerator Error DISP: Ice Jam in Dispenser Chute
Electrolux refrigerator error DISP usually means the ice dispenser chute is jammed with clumped or wedged ice.
Samsung Dryer Error dn: Firmware Download in Progress
The dryer is downloading and installing a firmware update over Wi-Fi. This is not a fault — the display shows 'dn' during the update process.
Samsung Washing Machine Error dn: Firmware Download in Progress
The washer is downloading and installing a firmware (software) update over Wi-Fi. The display shows 'dn' during this process. This is not a fault.
Brother Document Jam
The original document jammed in the ADF path.
Brother Document Jam
Originals jammed in the automatic document feeder during scanning, copying, or faxing.
Frigidaire Refrigerator Error DOOR: Door Ajar Alarm
Frigidaire refrigerator error DOOR usually means a door has been left open or is not sealing properly.
Electrolux Refrigerator Error DOOR: Door Ajar Alarm
Electrolux refrigerator error DOOR usually means a door has been left open or is not sealing properly.
Whirlpool Washing Machine Error drn: Not Draining
The washer attempted to drain but water remains in the tub after the drain cycle completed. This code appears on top-load HE models and is the functional equivalent of F9E1 on front-load models.
Maytag Washing Machine Error drn: Not Draining
The washer attempted to drain but water remains in the tub after the drain cycle completed. This code appears on top-load HE models and is the functional equivalent of F9E1 on front-load models.
Brother Drum ! message
The printer needs attention on the drum unit before continuing normally.
Brother Drum !
The drum unit needs attention, usually cleaning first and possibly replacement.
Brother Drum End Soon
The drum unit is nearing end of life but printing can usually continue temporarily.
Brother Drum End Soon
The drum unit is nearing its replacement threshold.
Bosch Washing Machine Error Drum Icon: Drum Cleaning Reminder
The washing machine is reminding you to run a drum cleaning cycle to remove detergent residue and bacteria.
LG Refrigerator Error dS: Defrost Sensor Short or Disconnection
The defrost sensor (thermistor that monitors evaporator temperature during the defrost cycle) has either shorted or become disconnected. Without a valid sensor reading, the control board cannot safely manage the defrost cycle.
Bosch Refrigerator Error E: Temperature Alarm — Refrigerator or Freezer Too Warm
The refrigerator is displaying 'E' to indicate a temperature alarm — the fridge or freezer compartment has risen above the safe food storage temperature. This is a warning indicator, not a component fault code.
Thermador Refrigerator Error E: Temperature Alarm — Refrigerator or Freezer Too Warm
The refrigerator is displaying 'E' to indicate a temperature alarm — the fridge or freezer compartment has risen above the safe food storage temperature. This is a warning indicator, not a component fault code.
Gaggenau Refrigerator Error E: Temperature Alarm — Refrigerator or Freezer Too Warm
The refrigerator is displaying 'E' to indicate a temperature alarm — the fridge or freezer compartment has risen above the safe food storage temperature. This is a warning indicator, not a component fault code.
Epson ET-2850 error E-01
A fatal printer error occurred and the printer needs a restart before anything else.
Epson ET-2980 error E-01
A printer error occurred and the unit should be restarted first.
Epson ET-4700 / L5190 error E-01
A printer error occurred and the printer should be restarted first.
Epson ET-2850 error E-02
The scanner reported an error and the unit needs a restart before anything else.
Epson ET-2980 error E-02
The scanner reported an error and needs a restart first.
Epson ET-4700 / L5190 error E-02
The scanner reported an error and needs a restart first.
Epson ET-2850 error E-11
The ink pad has reached the end of its service life and needs service attention.
Epson ET-2980 error E-11
The ink pad needs to be replaced and support is required.
Epson ET-4700 / L5190 error E-11
The ink pad needs to be replaced and support is required.
Epson ET-4700 / L5190 error E-12
The borderless-printing ink pad needs to be replaced.
Bosch Washing Machine Error E:00 / -18: Drain Pump Blocked or Obstructed
The washing machine pump is blocked and cannot drain water from the drum.
Bosch Washing Machine Error E:10: Intelligent Dosing System (i-DOS) Pump Blocked
The pump for the automatic detergent dosing system (i-DOS) is blocked and cannot dispense detergent or softener. Appears on models with i-DOS feature.
Bosch Washing Machine Error E:30 / -10: Water Intake Issue — Multiple Possible Causes
The washing machine cannot fill with water properly. Multiple causes are possible — the display may also show a faucet icon alongside this code.
Bosch Washing Machine Error E:30 / -20: Excess Foam or Additional Water Detected
The machine has detected excessive foam in the drum, or additional water was introduced mid-cycle, causing an abnormal water level reading.
Bosch Washing Machine Error E:36 / -10: Drain Pipe or Outlet Hose Blocked
The washing machine cannot drain because the drain pipe or outlet hose is blocked or kinked.
Bosch Washing Machine Error E:36 / -25 / -26: Drain Pump Blocked
The drain pump is blocked by a foreign object or debris and cannot evacuate water from the drum.
Bosch Washing Machine Error E:38 / -25 / -26: Drain Pump Blocked — Clean Drum First
The drain pump is blocked. On this code variant, Bosch recommends cleaning the drum first, then cleaning the pump if the error persists.
Bosch Washing Machine Error E:60 / -2B: Unbalanced Load — Spin Cycle Interrupted
The unbalanced load detection system has activated and interrupted the spin cycle because laundry is unevenly distributed in the drum.
Bosch Washing Machine Error E:92 / -01: Water Pressure Too Low or Inlet Filters Blocked
The washing machine cannot fill with enough water because household water pressure is too low or the inlet hose filters are blocked with sediment.
HP ENVY 6000 / 6400 error E0
One or both cartridges are unusable or need attention.
Bosch Washing Machine Error E:00 / -23: Water in Base Tray
Bosch washing machine error E:00 / -23 usually means the leak-protection system has detected water in the base tray.
Bosch Range Error E005: Oven Door Lock Fault
The oven door lock mechanism has failed to engage or disengage correctly, typically during or after a self-cleaning cycle.
Thermador Range Error E005: Oven Door Lock Fault
The oven door lock mechanism has failed to engage or disengage correctly, typically during or after a self-cleaning cycle.
Gaggenau Range Error E005: Oven Door Lock Fault
The oven door lock mechanism has failed to engage or disengage correctly, typically during or after a self-cleaning cycle.
Bosch Dishwasher Error Code E01: Heat Pump Motor Circuit Fault
There is a heat pump motor circuit fault at the main control board.
Bosch Dryer Error Code E01
The dryer may be detecting an airflow, filter, or setup-related problem.
Thermador Dishwasher Error Code E01: Heat Pump Motor Circuit Fault
There is a heat pump motor circuit fault at the main control board.
Gaggenau Dishwasher Error Code E01: Heat Pump Motor Circuit Fault
There is a heat pump motor circuit fault at the main control board.
Bosch Dishwasher Error Code E0100: Heat Pump Motor Circuit Fault (Extended Code)
There is a heat pump motor circuit fault at the main control board.
Thermador Dishwasher Error Code E0100: Heat Pump Motor Circuit Fault (Extended Code)
There is a heat pump motor circuit fault at the main control board.
Gaggenau Dishwasher Error Code E0100: Heat Pump Motor Circuit Fault (Extended Code)
There is a heat pump motor circuit fault at the main control board.
Bosch Dishwasher Error Code E0103: Main Control Board Relay Fault (Extended Code)
There is a main control board relay fault/error.
Thermador Dishwasher Error Code E0103: Main Control Board Relay Fault (Extended Code)
There is a main control board relay fault/error.
Gaggenau Dishwasher Error Code E0103: Main Control Board Relay Fault (Extended Code)
There is a main control board relay fault/error.
Bosch Dishwasher Error Code E0105: Faulty Heater Electronics (Extended Code)
Your dishwasher has detected faulty (heater) electronics in the self-test.
Thermador Dishwasher Error Code E0105: Faulty Heater Electronics (Extended Code)
Your dishwasher has detected faulty (heater) electronics in the self-test.
Gaggenau Dishwasher Error Code E0105: Faulty Heater Electronics (Extended Code)
Your dishwasher has detected faulty (heater) electronics in the self-test.
Bosch Dishwasher Error Code E0106: Wash Arm Diverter Circuit Fault (Extended Code)
There is a wash arm diverter circuit in main control board fault/error.
Thermador Dishwasher Error Code E0106: Wash Arm Diverter Circuit Fault (Extended Code)
There is a wash arm diverter circuit in main control board fault/error.
Gaggenau Dishwasher Error Code E0106: Wash Arm Diverter Circuit Fault (Extended Code)
There is a wash arm diverter circuit in main control board fault/error.
Bosch Dishwasher Error Code E0107: Main Control Board Relay Fault — Variant (Extended Code)
There is a main control board relay fault/error.
Thermador Dishwasher Error Code E0107: Main Control Board Relay Fault — Variant (Extended Code)
There is a main control board relay fault/error.
Gaggenau Dishwasher Error Code E0107: Main Control Board Relay Fault — Variant (Extended Code)
There is a main control board relay fault/error.
Bosch Range Error E011: Oven Temperature Sensor Fault
The oven's temperature sensor (NTC probe) has an open-circuit fault or has failed, preventing the range from accurately measuring oven cavity temperature.
Thermador Range Error E011: Oven Temperature Sensor Fault
The oven's temperature sensor (NTC probe) has an open-circuit fault or has failed, preventing the range from accurately measuring oven cavity temperature.
Gaggenau Range Error E011: Oven Temperature Sensor Fault
The oven's temperature sensor (NTC probe) has an open-circuit fault or has failed, preventing the range from accurately measuring oven cavity temperature.
Bosch Dishwasher Error Code E0110: Electronics Miscommunication Fault
Failure causing electronics miscommunication.
Thermador Dishwasher Error Code E0110: Electronics Miscommunication Fault
Failure causing electronics miscommunication.
Gaggenau Dishwasher Error Code E0110: Electronics Miscommunication Fault
Failure causing electronics miscommunication.
Bosch Dishwasher Error Code E02: Main Control Board Relay Fault
There is a main control board relay fault/error.
Bosch Dryer Error E02: Lint Filter Blocked — Needs Cleaning (E02 Variant)
Same as E01 — the lint filter is blocked and restricting airflow. E02 is a variant of the same fault on certain Bosch dryer models.
Bosch Refrigerator Error E02: Ice Maker Fault
The refrigerator's ice maker has detected a fault — it has stopped producing ice or has reported an error in the ice-making cycle.
Thermador Dishwasher Error Code E02: Main Control Board Relay Fault
There is a main control board relay fault/error.
Thermador Refrigerator Error E02: Ice Maker Fault
The refrigerator's ice maker has detected a fault — it has stopped producing ice or has reported an error in the ice-making cycle.
Gaggenau Dishwasher Error Code E02: Main Control Board Relay Fault
There is a main control board relay fault/error.
Gaggenau Refrigerator Error E02: Ice Maker Fault
The refrigerator's ice maker has detected a fault — it has stopped producing ice or has reported an error in the ice-making cycle.
Bosch Dishwasher Error Code E03: Main Control Board Relay Fault (Variant)
There is a main control board relay fault/error.
Bosch Refrigerator Error E03: Water Dispenser or User Interface Fault
The refrigerator has detected a fault in the water dispenser system or the user interface (control panel). Water dispensing may be unavailable and the display may behave erratically.
Thermador Dishwasher Error Code E03: Main Control Board Relay Fault (Variant)
There is a main control board relay fault/error.
Thermador Refrigerator Error E03: Water Dispenser or User Interface Fault
The refrigerator has detected a fault in the water dispenser system or the user interface (control panel). Water dispensing may be unavailable and the display may behave erratically.
Gaggenau Dishwasher Error Code E03: Main Control Board Relay Fault (Variant)
There is a main control board relay fault/error.
Gaggenau Refrigerator Error E03: Water Dispenser or User Interface Fault
The refrigerator has detected a fault in the water dispenser system or the user interface (control panel). Water dispensing may be unavailable and the display may behave erratically.
Bosch Dishwasher Error Code E04: Faulty Heater Electronics Detected
Your dishwasher has detected faulty (heater) electronics in the self-test.
Thermador Dishwasher Error Code E04: Faulty Heater Electronics Detected
Your dishwasher has detected faulty (heater) electronics in the self-test.
Gaggenau Dishwasher Error Code E04: Faulty Heater Electronics Detected
Your dishwasher has detected faulty (heater) electronics in the self-test.
Bosch Dishwasher Error Code E05: Wash Arm Diverter Circuit Fault
There is a wash arm diverter circuit in main control board fault/error.
Thermador Dishwasher Error Code E05: Wash Arm Diverter Circuit Fault
There is a wash arm diverter circuit in main control board fault/error.
Gaggenau Dishwasher Error Code E05: Wash Arm Diverter Circuit Fault
There is a wash arm diverter circuit in main control board fault/error.
Bosch Dishwasher Error Code E06: Door Sensor Circuit Fault
There is a door sensor circuit fault/error.
Bosch Dryer Error E06: Heating Circuit Fault
A fault has been detected in the dryer's heating circuit. The dryer cannot generate the heat required to dry laundry.
Thermador Dishwasher Error Code E06: Door Sensor Circuit Fault
There is a door sensor circuit fault/error.
Gaggenau Dishwasher Error Code E06: Door Sensor Circuit Fault
There is a door sensor circuit fault/error.
Bosch Dishwasher Error Code E07: Zeolite (CrystalDry) Fan Motor Defective
The Zeolite (Crystal Dry) fan motor is defective.
Thermador Dishwasher Error Code E07: Zeolite (CrystalDry) Fan Motor Defective
The Zeolite (Crystal Dry) fan motor is defective.
Gaggenau Dishwasher Error Code E07: Zeolite (CrystalDry) Fan Motor Defective
The Zeolite (Crystal Dry) fan motor is defective.
Bosch Dryer Error E08: Electronics Fault — NTC Temperature Sensor
The dryer has detected an electronics fault in the NTC (negative temperature coefficient) sensor circuit. The NTC sensor monitors drum or exhaust temperature to control the heating cycle.
Bosch Dishwasher Error Code E09: Heat Pump Internal Heater Fault
There is a heat pump internal heater fault/error.
Bosch Dryer Error E09: Electronics Fault — Control Unit
The dryer has detected an electronics fault in the main control unit. The control board manages all dryer functions and has reported a critical error.
Thermador Dishwasher Error Code E09: Heat Pump Internal Heater Fault
There is a heat pump internal heater fault/error.
Gaggenau Dishwasher Error Code E09: Heat Pump Internal Heater Fault
There is a heat pump internal heater fault/error.
Whirlpool Dishwasher Error E1: Filling or Water Supply Issue — Possible Siphoning
The dishwasher is detecting a water filling problem or a siphoning condition. This can mean water is not entering the tub correctly, or water is draining out as fast as it fills in due to incorrect drain hose routing.
Maytag Dishwasher Error E1: Filling or Water Supply Issue — Possible Siphoning
The dishwasher is detecting a water filling problem or a siphoning condition. This can mean water is not entering the tub correctly, or water is draining out as fast as it fills in due to incorrect drain hose routing.
KitchenAid Dishwasher Error E1: Filling or Water Supply Issue — Possible Siphoning
The dishwasher is detecting a water filling problem or a siphoning condition. This can mean water is not entering the tub correctly, or water is draining out as fast as it fills in due to incorrect drain hose routing.
Frigidaire Dryer Error E1: Exhaust Temperature Thermistor Fault — Reading Too Low
The dryer's exhaust temperature thermistor reported a temperature below 18°F (−8°C), which is outside the physically possible operating range. The control board has flagged the reading as a sensor failure rather than an actual temperature condition. Drying is suspended until the sensor circuit is verified.
Frigidaire Washing Machine Error E1: Slow or No Water Fill
The top-load washer did not fill to the required water level within the allotted time. The machine detected inadequate water flow and paused the cycle to protect the motor and heating elements from running dry.
Electrolux Dryer Error E1: Exhaust Temperature Thermistor Fault — Reading Too Low
The dryer's exhaust temperature thermistor reported a temperature below 18°F (−8°C), which is outside the physically possible operating range. The control board has flagged the reading as a sensor failure rather than an actual temperature condition. Drying is suspended until the sensor circuit is verified.
Electrolux Washing Machine Error E1: Slow or No Water Fill
The top-load washer did not fill to the required water level within the allotted time. The machine detected inadequate water flow and paused the cycle to protect the motor and heating elements from running dry.
Haier Dishwasher Error E1: Drain Error — Not Draining or Draining Slowly
The dishwasher is not draining properly after a wash or rinse cycle. Water remains in the bottom of the tub, indicating a blocked drain path or a problem with the drain pump.
Haier Refrigerator Error E1: Fan or Motor Error — Evaporator Fan Fault
The refrigerator has detected a fault with the evaporator fan motor or a related motor circuit. E2 on some models indicates a condenser fan fault. Without the evaporator fan, cold air cannot circulate through the refrigerator and freezer compartments, causing temperatures to rise.
Haier Washing Machine Error E1: Drain Failure — Cannot Drain Within 4 Minutes
The washer attempted to drain but could not empty the drum within the 4-minute drain window. The drain pump may be blocked, the drain hose kinked, or the pump motor has failed.
Bosch Dishwasher Error Code E10: Zeolite Chamber Heater Fault
There is a Zeolite (Crystal Dry) chamber heater fault/error.
Thermador Dishwasher Error Code E10: Zeolite Chamber Heater Fault
There is a Zeolite (Crystal Dry) chamber heater fault/error.
Gaggenau Dishwasher Error Code E10: Zeolite Chamber Heater Fault
There is a Zeolite (Crystal Dry) chamber heater fault/error.
Bosch Range Error E100: Oven Overtemperature — Safety Shutoff Triggered
The oven cavity temperature exceeded the safe maximum limit and the safety shutoff has stopped the heating elements to prevent damage or fire.
Thermador Range Error E100: Oven Overtemperature — Safety Shutoff Triggered
The oven cavity temperature exceeded the safe maximum limit and the safety shutoff has stopped the heating elements to prevent damage or fire.
Gaggenau Range Error E100: Oven Overtemperature — Safety Shutoff Triggered
The oven cavity temperature exceeded the safe maximum limit and the safety shutoff has stopped the heating elements to prevent damage or fire.
Bosch Range Error E101: Oven Cooling Fan Fault
The oven's cooling fan has stopped working or is running below the required speed, preventing proper cooling of the control electronics and oven exterior.
Thermador Range Error E101: Oven Cooling Fan Fault
The oven's cooling fan has stopped working or is running below the required speed, preventing proper cooling of the control electronics and oven exterior.
Gaggenau Range Error E101: Oven Cooling Fan Fault
The oven's cooling fan has stopped working or is running below the required speed, preventing proper cooling of the control electronics and oven exterior.
Bosch Oven Error E11: Oven Temperature Sensor Fault — NTC Sensor
The oven's NTC (negative temperature coefficient) temperature sensor has failed or has an open-circuit fault, preventing the oven from measuring cavity temperature.
Frigidaire Washer Error E11: Fill Time Too Long
Frigidaire washer error E11 usually means the machine is not getting enough incoming water to reach the required level in time.
Electrolux Washer Error E11: Fill Time Too Long
Electrolux washer error E11 usually means the machine is not getting enough incoming water to reach the required level in time.
Thermador Oven Error E11: Oven Temperature Sensor Fault — NTC Sensor
The oven's NTC (negative temperature coefficient) temperature sensor has failed or has an open-circuit fault, preventing the oven from measuring cavity temperature.
Gaggenau Oven Error E11: Oven Temperature Sensor Fault — NTC Sensor
The oven's NTC (negative temperature coefficient) temperature sensor has failed or has an open-circuit fault, preventing the oven from measuring cavity temperature.
Bosch Dishwasher Error Code E12: Limescale Buildup in Heat Pump
There is limescale build-up in the heat pump.
Thermador Dishwasher Error Code E12: Limescale Buildup in Heat Pump
There is limescale build-up in the heat pump.
Gaggenau Dishwasher Error Code E12: Limescale Buildup in Heat Pump
There is limescale build-up in the heat pump.
Bosch Range Error E126: Control Board Communication Fault
The oven's main control board has detected a communication failure between internal electronic modules, preventing normal operation.
Thermador Range Error E126: Control Board Communication Fault
The oven's main control board has detected a communication failure between internal electronic modules, preventing normal operation.
Gaggenau Range Error E126: Control Board Communication Fault
The oven's main control board has detected a communication failure between internal electronic modules, preventing normal operation.
LG Dryer Error E13: Drain Hose Issue — Hybrid Dryer Only
On LG hybrid heat pump dryers (ventless condensing dryers with a drain hose), E13 indicates that water collected during the drying cycle cannot drain correctly. This code only appears on hybrid/ventless dryer models with a drain connection — it does not apply to standard vented dryers.
Frigidaire Washing Machine Error E13: Water Leak Detected — Tub or Air Bell
The front-load washer's pressure sensor has detected water where it should not be — either a leak from the main tub into the base of the machine, or an air leak in the air bell (pressure sensor hose) that is giving false low-water readings. E13 is a high-severity fault that should be investigated promptly.
Electrolux Washing Machine Error E13: Water Leak Detected — Tub or Air Bell
The front-load washer's pressure sensor has detected water where it should not be — either a leak from the main tub into the base of the machine, or an air leak in the air bell (pressure sensor hose) that is giving false low-water readings. E13 is a high-severity fault that should be investigated promptly.
Bosch Dishwasher Error E14: Water Fill Metering or Flow Sensor Fault
Bosch dishwasher error E14 usually means the machine is having trouble measuring incoming water correctly during fill.
Thermador Dishwasher Error Code E14: Flow Meter Failure or Water Fill Issue
There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system.
Gaggenau Dishwasher Error Code E14: Flow Meter Failure or Water Fill Issue
There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system.
Bosch Dishwasher Error Code E15: Water Detected in Base (Flood Protection Active)
The safety switch has detected water in the base of the dishwasher, so the flood protection system has activated.
Whirlpool Dishwasher Error E15: Small Leak Detected — Protective Shutdown
The dishwasher's leak detection system has detected moisture in the base of the appliance. The machine has shut down as a precaution. This code indicates an actual water leak, not a sensor false alarm, and must be investigated before the machine is used again.
Maytag Dishwasher Error E15: Small Leak Detected — Protective Shutdown
The dishwasher's leak detection system has detected moisture in the base of the appliance. The machine has shut down as a precaution. This code indicates an actual water leak, not a sensor false alarm, and must be investigated before the machine is used again.
KitchenAid Dishwasher Error E15: Small Leak Detected — Protective Shutdown
The dishwasher's leak detection system has detected moisture in the base of the appliance. The machine has shut down as a precaution. This code indicates an actual water leak, not a sensor false alarm, and must be investigated before the machine is used again.
Thermador Dishwasher Error Code E15: Water Detected in Base (Flood Protection Active)
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated.
Gaggenau Dishwasher Error Code E15: Water Detected in Base (Flood Protection Active)
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated.
Bosch Dishwasher Error Code E16: Fill or Overfill Problem
Bosch dishwasher error E16 usually means there is a problem with the water fill system, often because the inlet valve is not controlling water flow properly.
Bosch Washing Machine Error E16: Door Not Locked Properly
The washing machine door is not fully closed and locked. The machine will not start, or has stopped mid-cycle because the door lock cannot be confirmed.
Thermador Dishwasher Error Code E16: Water Fill Overfill or Inlet Valve Issue
There is an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher.
Gaggenau Dishwasher Error Code E16: Water Fill Overfill or Inlet Valve Issue
There is an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher.
Bosch Dishwasher Error Code E17: Water Fill Overfill (Variant — Same as E16)
Water Fill Overfill (Variant — Same as E16)
Bosch Washing Machine Error E17: Water Inlet Filters Blocked or AquaStop Activated
Bosch washing machine error E17 usually means the washer cannot get enough incoming water to fill normally.
Thermador Dishwasher Error Code E17: Water Fill Overfill (Variant — Same as E16)
Water Fill Overfill (Variant — Same as E16)
Gaggenau Dishwasher Error Code E17: Water Fill Overfill (Variant — Same as E16)
Water Fill Overfill (Variant — Same as E16)
Bosch Dishwasher Error Code E18: Water Level Too Low During Fill
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
Bosch Washing Machine Error Code E18
The washing machine is usually unable to drain water within the expected time.
Thermador Dishwasher Error Code E18: Water Level Too Low During Fill
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
Gaggenau Dishwasher Error Code E18: Water Level Too Low During Fill
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
Bosch Dishwasher Error Code E19: Detergent Dispenser Solenoid Fault
There is a detergent dispenser solenoid circuit fault/error.
Thermador Dishwasher Error Code E19: Detergent Dispenser Solenoid Fault
There is a detergent dispenser solenoid circuit fault/error.
Gaggenau Dishwasher Error Code E19: Detergent Dispenser Solenoid Fault
There is a detergent dispenser solenoid circuit fault/error.
Frigidaire Dryer Error E2: Exhaust Temperature Thermistor Fault — Reading Too High
The dryer's exhaust temperature thermistor reported a temperature above 250°F (121°C), which is beyond the normal operating ceiling. The control board treats this as a sensor failure (short circuit in the thermistor) rather than an actual temperature reading. Drying is suspended to prevent the dryer from running blind on temperature control.
Frigidaire Washing Machine Error E2: Water Drainage Too Slow
The top-load washer detected that water is draining more slowly than expected. The cycle pauses to prevent overflowing or running the next phase without an empty drum.
Electrolux Dryer Error E2: Exhaust Temperature Thermistor Fault — Reading Too High
The dryer's exhaust temperature thermistor reported a temperature above 250°F (121°C), which is beyond the normal operating ceiling. The control board treats this as a sensor failure (short circuit in the thermistor) rather than an actual temperature reading. Drying is suspended to prevent the dryer from running blind on temperature control.
Electrolux Washing Machine Error E2: Water Drainage Too Slow
The top-load washer detected that water is draining more slowly than expected. The cycle pauses to prevent overflowing or running the next phase without an empty drum.
Haier Dishwasher Error E2: Drainage Issue or Scale on Turbidity Sensor
The dishwasher has detected a drainage problem or the turbidity sensor (which measures wash water cleanliness) has scale buildup preventing accurate readings. Scale on the sensor causes the machine to misread water quality and interrupt the cycle.
Haier Washing Machine Error E2: Door Lock Error — Cannot Lock Door
The washer attempted to lock the door before starting the cycle but did not receive confirmation that the lock engaged within 20 seconds. The machine will not run with an unconfirmed door lock.
Fisher & Paykel Dryer Error Code E2: Drain Pump Failure (Condenser/Heat Pump Models)
The drain pump on a condenser or heat pump dryer has failed. These models collect condensed water in a tank or drain via a hose — a failed pump prevents water removal and the dryer stops.
HP ENVY 6000 / 6400 error E2
The loaded paper size does not match the paper settings for the print job.
Bosch Dishwasher Error Code E20: Heat Pump Internal Heater Fault (Variant)
There is a heat pump internal heater fault/error.
Thermador Dishwasher Error Code E20: Heat Pump Internal Heater Fault (Variant)
There is a heat pump internal heater fault/error.
Gaggenau Dishwasher Error Code E20: Heat Pump Internal Heater Fault (Variant)
There is a heat pump internal heater fault/error.
Bosch Dishwasher Error Code E2030: Heat Pump Internal Heater Fault (Extended Code)
There is a heat pump internal heater fault/error.
Thermador Dishwasher Error Code E2030: Heat Pump Internal Heater Fault (Extended Code)
There is a heat pump internal heater fault/error.
Gaggenau Dishwasher Error Code E2030: Heat Pump Internal Heater Fault (Extended Code)
There is a heat pump internal heater fault/error.
Bosch Dishwasher Error Code E2060: Limescale Buildup in Heat Pump (Extended Code)
There is limescale build-up in the heat pump.
Thermador Dishwasher Error Code E2060: Limescale Buildup in Heat Pump (Extended Code)
There is limescale build-up in the heat pump.
Gaggenau Dishwasher Error Code E2060: Limescale Buildup in Heat Pump (Extended Code)
There is limescale build-up in the heat pump.
Bosch Dishwasher Error Code E21: Heat Pump Blocked
The heat pump is blocked.
Frigidaire Washer Error E21: Water Not Pumping Out Fast Enough
Frigidaire washer error E21 usually means the machine is draining, but not fast enough to empty the drum normally.
Electrolux Washer Error E21: Water Not Pumping Out Fast Enough
Electrolux washer error E21 usually means the machine is draining, but not fast enough to empty the drum normally.
Thermador Dishwasher Error Code E21: Heat Pump Blocked
The heat pump is blocked.
Gaggenau Dishwasher Error Code E21: Heat Pump Blocked
The heat pump is blocked.
Bosch Dishwasher Error Code E2120: Zeolite Chamber Heater Fault (Extended Code)
There is a Zeolite (Crystal Dry) chamber heater fault/error.
Thermador Dishwasher Error Code E2120: Zeolite Chamber Heater Fault (Extended Code)
There is a Zeolite (Crystal Dry) chamber heater fault/error.
Gaggenau Dishwasher Error Code E2120: Zeolite Chamber Heater Fault (Extended Code)
There is a Zeolite (Crystal Dry) chamber heater fault/error.
Bosch Dishwasher Error Code E2130: Zeolite Fan Motor Defective (Extended Code)
The Zeolite (Crystal Dry) fan motor is defective.
Thermador Dishwasher Error Code E2130: Zeolite Fan Motor Defective (Extended Code)
The Zeolite (Crystal Dry) fan motor is defective.
Gaggenau Dishwasher Error Code E2130: Zeolite Fan Motor Defective (Extended Code)
The Zeolite (Crystal Dry) fan motor is defective.
Bosch Dishwasher Error Code E22: Filter Blocked
Bosch dishwasher error E22 usually means the filter is blocked badly enough to slow water movement through the machine.
Thermador Dishwasher Error Code E22: Dishwasher Filter Blocked
The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
Gaggenau Dishwasher Error Code E22: Dishwasher Filter Blocked
The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
Bosch Dishwasher Error Code E23: Drain Pump Blocked or Faulty
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
Frigidaire Washing Machine Error E23: Drain Pump Relay Failure on Control Board
The main control board's relay that powers the drain pump has failed. The pump is not receiving the electrical signal to run, so the drum cannot drain. E23 points to an electronic component fault rather than a mechanical blockage.
Electrolux Washing Machine Error E23: Drain Pump Relay Failure on Control Board
The main control board's relay that powers the drain pump has failed. The pump is not receiving the electrical signal to run, so the drum cannot drain. E23 points to an electronic component fault rather than a mechanical blockage.
Thermador Dishwasher Error Code E23: Drain Pump Blocked or Faulty
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
Gaggenau Dishwasher Error Code E23: Drain Pump Blocked or Faulty
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
Bosch Dishwasher Error Code E24: Not Draining (Filter or Drain Blocked)
Your dishwasher is not draining properly - usually due to a blocked filter or drain path.
Bosch Dryer Error E24: Electronics Fault — Drum Temperature Sensor
The dryer has detected a fault in the drum temperature sensor circuit. This sensor monitors heat inside the drum and regulates the heating cycle.
Thermador Dishwasher Error Code E24: Not Draining Properly — Filter or Drain Blocked
The dishwasher is not draining properly due to the drain filter being blocked.
Gaggenau Dishwasher Error Code E24: Not Draining Properly — Filter or Drain Blocked
The dishwasher is not draining properly due to the drain filter being blocked.
Bosch Dishwasher Error Code E25: Drain Pump Blocked or Pump Cover Loose
Bosch dishwasher error E25 usually means the drain pump area is blocked or the pump cover is not seated correctly.
Bosch Dryer Error E25: Electronics Fault — Moisture Sensor
The dryer has detected a fault in the moisture sensor circuit. The moisture sensor detects when laundry is dry and signals the control board to end the cycle.
Thermador Dishwasher Error Code E25: Drain Pump Blocked or Pump Cover Loose
The drain pump is blocked or the drain pump cover is loose or missing.
Gaggenau Dishwasher Error Code E25: Drain Pump Blocked or Pump Cover Loose
The drain pump is blocked or the drain pump cover is loose or missing.
Bosch Dishwasher Error Code E27: Household Power Supply Voltage Too Low
The house power supply to the unit is too low.
Thermador Dishwasher Error Code E27: Household Power Supply Voltage Too Low
The house power supply to the unit is too low.
Gaggenau Dishwasher Error Code E27: Household Power Supply Voltage Too Low
The house power supply to the unit is too low.
Bosch Dryer Error E28: Electronics Fault — Motor Speed Sensor
The dryer has detected a fault in the motor speed sensor (tachometer). This sensor monitors drum rotation speed and reports to the control board.
Frigidaire Washing Machine Error E3: Lid Open or Lid Lock Failed
The top-load washer's control board cannot confirm that the lid is closed and locked. The lid must lock before the spin cycle can begin for operator safety. E3 appears when the lock does not engage within the expected time.
Electrolux Washing Machine Error E3: Lid Open or Lid Lock Failed
The top-load washer's control board cannot confirm that the lid is closed and locked. The lid must lock before the spin cycle can begin for operator safety. E3 appears when the lock does not engage within the expected time.
Haier Washing Machine Error E3: Spin Error — Unbalanced or Failed Spin
The washer detected an issue during the spin cycle. The drum either cannot reach spin speed due to an unbalanced load or there is a mechanical problem with the drive system preventing normal spinning.
Fisher & Paykel Dryer Error Code E3: Exhaust Thermistor Fault
The exhaust temperature thermistor has reported a reading outside the expected range. The dryer cannot monitor exhaust temperature — a safety-critical function.
HP OfficeJet Pro 9010 / 9020 E3 or carriage jam
The print carriage cannot move normally across the printer.
HP OfficeJet Pro 8010 / 8020 / 8030 E3 or carriage jam
The print carriage cannot move normally across the printer.
Daikin E3/E4/L8 air conditioner error code
The unit is protecting because stop valves are closed or airflow is blocked.
Bosch Washing Machine Error E:30 / -80: Drain Hose or Outlet Blocked
Bosch washing machine error E:30 / -80 usually means the washer cannot drain because the outlet hose or drain path is restricted or routed incorrectly.
Bosch Dishwasher Error Code E3000: Flow Meter Failure or Water Fill Issue (Extended Code)
There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system.
Thermador Dishwasher Error Code E3000: Flow Meter Failure or Water Fill Issue (Extended Code)
There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system.
Gaggenau Dishwasher Error Code E3000: Flow Meter Failure or Water Fill Issue (Extended Code)
There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system.
Bosch Range Error E302: Power Board or Control Panel Overheated
The power board (lower-case e302 on some models) or the control panel (upper-case E302 on others) has exceeded its safe operating temperature. Both conditions trigger the same display code on different model variants.
Thermador Range Error E302: Power Board or Control Panel Overheated
The power board (lower-case e302 on some models) or the control panel (upper-case E302 on others) has exceeded its safe operating temperature. Both conditions trigger the same display code on different model variants.
Gaggenau Range Error E302: Power Board or Control Panel Overheated
The power board (lower-case e302 on some models) or the control panel (upper-case E302 on others) has exceeded its safe operating temperature. Both conditions trigger the same display code on different model variants.
Bosch Range Error E310: Relay Board Fault
The oven's relay board — which controls power to the heating elements — has reported a fault, preventing the heating elements from operating correctly.
Thermador Range Error E310: Relay Board Fault
The oven's relay board — which controls power to the heating elements — has reported a fault, preventing the heating elements from operating correctly.
Gaggenau Range Error E310: Relay Board Fault
The oven's relay board — which controls power to the heating elements — has reported a fault, preventing the heating elements from operating correctly.
Bosch Dishwasher Error Code E3100: Water Detected in Base — Flood Protection Active (Extended Code)
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated.
Thermador Dishwasher Error Code E3100: Water Detected in Base — Flood Protection Active (Extended Code)
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated.
Gaggenau Dishwasher Error Code E3100: Water Detected in Base — Flood Protection Active (Extended Code)
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated.
Bosch Washing Machine Error E32: Imbalance Detected — Spin Cycle Reduced or Stopped
The washing machine has detected that the laundry load is unevenly distributed in the drum. To protect the machine, the spin speed is reduced or the spin cycle is stopped entirely.
Bosch Dishwasher Error Code E3200: Water Level Too Low During Fill (Extended Code)
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
Thermador Dishwasher Error Code E3200: Water Level Too Low During Fill (Extended Code)
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
Gaggenau Dishwasher Error Code E3200: Water Level Too Low During Fill (Extended Code)
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly.
Bosch Washing Machine Error E33: Excess Detergent Foam Detected
The washing machine has detected detergent foam overflowing from the detergent drawer, caused by too much detergent or an old detergent formula.
Bosch Dishwasher Error Code E3300: Water Fill Overfill or Inlet Valve Issue (Extended Code)
There is an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher.
Thermador Dishwasher Error Code E3300: Water Fill Overfill or Inlet Valve Issue (Extended Code)
There is an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher.
Gaggenau Dishwasher Error Code E3300: Water Fill Overfill or Inlet Valve Issue (Extended Code)
There is an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher.
Bosch Washing Machine Error E34: Door Not Locked Properly (E34 Variant)
Same fault as E16 — door lock error. E34 appears on specific Bosch washing machine model variants.
Bosch Dishwasher Error Code E3400: Water Fill Overfill — Variant (Extended Code)
Water Fill Overfill — Variant (Extended Code)
Thermador Dishwasher Error Code E3400: Water Fill Overfill — Variant (Extended Code)
Water Fill Overfill — Variant (Extended Code)
Gaggenau Dishwasher Error Code E3400: Water Fill Overfill — Variant (Extended Code)
Water Fill Overfill — Variant (Extended Code)
Frigidaire Washing Machine Error E35: Pressure Sensor Indicates Water Overfill
The pressure sensor has reported that the water level in the tub has exceeded the maximum fill level. This is a high-severity fault — an overfilled drum can overflow and damage the machine's electronics. The control board halts the cycle immediately.
Electrolux Washing Machine Error E35: Pressure Sensor Indicates Water Overfill
The pressure sensor has reported that the water level in the tub has exceeded the maximum fill level. This is a high-severity fault — an overfilled drum can overflow and damage the machine's electronics. The control board halts the cycle immediately.
Whirlpool Dishwasher Error E4: Water Supply or Float Switch Issue
The dishwasher has detected a water supply fault or an activated float switch. The drain sequence has been initiated and the machine is prevented from operating until the condition is resolved.
Maytag Dishwasher Error E4: Water Supply or Float Switch Issue
The dishwasher has detected a water supply fault or an activated float switch. The drain sequence has been initiated and the machine is prevented from operating until the condition is resolved.
KitchenAid Dishwasher Error E4: Water Supply or Float Switch Issue
The dishwasher has detected a water supply fault or an activated float switch. The drain sequence has been initiated and the machine is prevented from operating until the condition is resolved.
Frigidaire Washing Machine Error E4: Unbalanced Load During Spin
The top-load washer detected that the laundry load is unevenly distributed in the drum during spin. Excessive vibration from an unbalanced load can damage the machine — the washer pauses spin to protect itself.
Electrolux Washing Machine Error E4: Unbalanced Load During Spin
The top-load washer detected that the laundry load is unevenly distributed in the drum during spin. Excessive vibration from an unbalanced load can damage the machine — the washer pauses spin to protect itself.
Haier Washing Machine Error E4: Fill Error — Water Not Reaching Required Level
The washer could not fill to the required water level within the allotted 8–12 minute fill window. Water is either not entering at all or entering too slowly to complete the fill on time.
Fisher & Paykel Dryer Error Code E4: Heater or Sensor Malfunction
The heating system has reported a fault — either the heater element, thermal cut-out, or a temperature sensor. A blocked lint filter often causes this code by forcing the heater to overheat.
HP ENVY 6000 / 6400 error E4
A paper jam or false paper-jam condition was detected.
Frigidaire Washing Machine Error E41: Control Board Thinks Door is Open
The main control board is reading the door switch as open, meaning it believes the door is not closed. E41 is triggered even if the door appears visually closed — the electrical signal from the door switch is not reaching the control board.
Electrolux Washing Machine Error E41: Control Board Thinks Door is Open
The main control board is reading the door switch as open, meaning it believes the door is not closed. E41 is triggered even if the door appears visually closed — the electrical signal from the door switch is not reaching the control board.
Frigidaire Washing Machine Error E42: Door Remains Locked After Cycle
The front-load washer door lock did not release at the end of the cycle. E42 is essentially the opposite of E41 — the door is locked when it should have unlocked. This can leave laundry trapped inside the drum.
Electrolux Washing Machine Error E42: Door Remains Locked After Cycle
The front-load washer door lock did not release at the end of the cycle. E42 is essentially the opposite of E41 — the door is locked when it should have unlocked. This can leave laundry trapped inside the drum.
Frigidaire Dryer Error E4A: Program Timeout — Drying Time Exceeded
The dryer ran for longer than the maximum allowable program time without the load reaching the target dryness level. The control board ends the cycle and displays E4A to alert you that something prevented the load from drying within the expected time window.
Electrolux Dryer Error E4A: Program Timeout — Drying Time Exceeded
The dryer ran for longer than the maximum allowable program time without the load reaching the target dryness level. The control board ends the cycle and displays E4A to alert you that something prevented the load from drying within the expected time window.
Frigidaire Washing Machine Error E5: Washer Not Level
The top-load washer has detected that it is not sitting level, which prevents the drum from balancing correctly during spin. E5 is often triggered alongside E4 when the leveling issue is severe.
Electrolux Washing Machine Error E5: Washer Not Level
The top-load washer has detected that it is not sitting level, which prevents the drum from balancing correctly during spin. E5 is often triggered alongside E4 when the leveling issue is severe.
HP ENVY 6000 / 6400 error E5
The scanner or printer is in an error state and HP routes users through a reset path first.
Frigidaire Washing Machine Error E52: Bad Signal from Motor Speed Sensor (Tachometer)
The control board received an erratic or out-of-range signal from the tachometer generator — the sensor that monitors motor speed. The board cannot confirm the motor is running at the correct speed, so the cycle is halted to protect the motor.
Electrolux Washing Machine Error E52: Bad Signal from Motor Speed Sensor (Tachometer)
The control board received an erratic or out-of-range signal from the tachometer generator — the sensor that monitors motor speed. The board cannot confirm the motor is running at the correct speed, so the cycle is halted to protect the motor.
Frigidaire Washing Machine Error E55: Motor Overheating
The washer's motor has reached a temperature above its safe operating limit. The control board has cut power to the motor to prevent damage. The machine will not resume until the motor has cooled to a safe temperature.
Electrolux Washing Machine Error E55: Motor Overheating
The washer's motor has reached a temperature above its safe operating limit. The control board has cut power to the motor to prevent damage. The machine will not resume until the motor has cooled to a safe temperature.
Frigidaire Washing Machine Error E59: No Tachometer Signal for 3 Seconds
The control board received no signal from the tachometer generator for more than 3 seconds while the motor was commanded to run. This means the motor either stopped completely or the tachometer has lost electrical continuity. The cycle is halted to protect the motor.
Electrolux Washing Machine Error E59: No Tachometer Signal for 3 Seconds
The control board received no signal from the tachometer generator for more than 3 seconds while the motor was commanded to run. This means the motor either stopped completely or the tachometer has lost electrical continuity. The cycle is halted to protect the motor.
Frigidaire Dryer Error E5B: Heater Fault — No Heat Detected
The control board commanded the heating element to turn on but the temperature sensor did not register an increase in temperature within the expected time. The dryer is tumbling but producing no heat — clothes will not dry.
Electrolux Dryer Error E5B: Heater Fault — No Heat Detected
The control board commanded the heating element to turn on but the temperature sensor did not register an increase in temperature within the expected time. The dryer is tumbling but producing no heat — clothes will not dry.
Fisher & Paykel Dryer Error Code E6: Blocked Lint Filter
The dryer has detected restricted airflow due to a blocked lint filter. Clean the filter and the code will clear. A blocked lint filter is a leading cause of dryer fires.
HP ENVY 6000 / 6400 error E6
A generic printer error is blocking printing and HP directs users through cartridge, firmware, and reset checks.
Mitsubishi Electric E6/E7 air conditioner error code
The indoor and outdoor units are not communicating properly.
Bosch Dishwasher Error Code E6001: Heat Pump Internal Heater Fault (Extended Code — Premium Models)
There is a heat pump internal heater fault/error.
Thermador Dishwasher Error Code E6001: Heat Pump Internal Heater Fault (Extended Code — Premium Models)
There is a heat pump internal heater fault/error.
Gaggenau Dishwasher Error Code E6001: Heat Pump Internal Heater Fault (Extended Code — Premium Models)
There is a heat pump internal heater fault/error.
Bosch Dishwasher Error Code E6002: Heat Pump Blocked (Extended Code — Premium Models)
The heat pump is blocked.
Thermador Dishwasher Error Code E6002: Heat Pump Blocked (Extended Code — Premium Models)
The heat pump is blocked.
Gaggenau Dishwasher Error Code E6002: Heat Pump Blocked (Extended Code — Premium Models)
The heat pump is blocked.
Bosch Dishwasher Error Code E6101: Drain Pump Blocked or Faulty (Extended Code — Premium Models)
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
Thermador Dishwasher Error Code E6101: Drain Pump Blocked or Faulty (Extended Code — Premium Models)
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
Gaggenau Dishwasher Error Code E6101: Drain Pump Blocked or Faulty (Extended Code — Premium Models)
There is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty.
Bosch Dishwasher Error Code E6102: Drain Pump Blocked or Cover Loose (Extended Code — Premium Models)
The drain pump is blocked or the drain pump cover is loose or missing.
Thermador Dishwasher Error Code E6102: Drain Pump Blocked or Cover Loose (Extended Code — Premium Models)
The drain pump is blocked or the drain pump cover is loose or missing.
Gaggenau Dishwasher Error Code E6102: Drain Pump Blocked or Cover Loose (Extended Code — Premium Models)
The drain pump is blocked or the drain pump cover is loose or missing.
Bosch Dishwasher Error Code E6103: Not Draining — Filter or Drain Blocked (Extended Code — Premium Models)
The dishwasher is not draining properly due to the drain filter being blocked.
Thermador Dishwasher Error Code E6103: Not Draining — Filter or Drain Blocked (Extended Code — Premium Models)
The dishwasher is not draining properly due to the drain filter being blocked.
Gaggenau Dishwasher Error Code E6103: Not Draining — Filter or Drain Blocked (Extended Code — Premium Models)
The dishwasher is not draining properly due to the drain filter being blocked.
Bosch Dishwasher Error Code E6160: PowerControl Lower Spray Arm Reference Position Not Found
PowerControlâ„¢ (Controlled Lower Spray Arm) reference position not found.
Thermador Dishwasher Error Code E6160: PowerControl Lower Spray Arm Reference Position Not Found
PowerControlâ„¢ (Controlled Lower Spray Arm) reference position not found.
Gaggenau Dishwasher Error Code E6160: PowerControl Lower Spray Arm Reference Position Not Found
PowerControlâ„¢ (Controlled Lower Spray Arm) reference position not found.
Frigidaire Dryer Error E64: Heating Element Open Circuit or Disconnected
The control board detected an open circuit in the heating element — either the element wire has broken, the element coil has burned through, or a wiring connection to the element has come loose. No heat will be produced while E64 is active.
Electrolux Dryer Error E64: Heating Element Open Circuit or Disconnected
The control board detected an open circuit in the heating element — either the element wire has broken, the element coil has burned through, or a wiring connection to the element has come loose. No heat will be produced while E64 is active.
Frigidaire Dryer Error E65: Heating Element Relay Fault
The control board's relay that switches power to the heating element has failed. E65 (and the related E66 on some models) indicates an electronic component fault — the element itself may be intact but it cannot receive power through the failed relay.
Electrolux Dryer Error E65: Heating Element Relay Fault
The control board's relay that switches power to the heating element has failed. E65 (and the related E66 on some models) indicates an electronic component fault — the element itself may be intact but it cannot receive power through the failed relay.
Frigidaire Dryer Error E68: Stuck Key on Electronic Control Board
The control board detected that one of the user interface buttons has been held down for an extended period, suggesting the button is stuck or the keypad membrane has failed. The dryer pauses to prevent the stuck button from executing unintended commands.
Electrolux Dryer Error E68: Stuck Key on Electronic Control Board
The control board detected that one of the user interface buttons has been held down for an extended period, suggesting the button is stuck or the keypad membrane has failed. The dryer pauses to prevent the stuck button from executing unintended commands.
Bosch Dishwasher Error Code E6900: Detergent Dispenser Solenoid Fault (Extended Code — Premium Models)
There is a detergent dispenser solenoid circuit fault/error.
Thermador Dishwasher Error Code E6900: Detergent Dispenser Solenoid Fault (Extended Code — Premium Models)
There is a detergent dispenser solenoid circuit fault/error.
Gaggenau Dishwasher Error Code E6900: Detergent Dispenser Solenoid Fault (Extended Code — Premium Models)
There is a detergent dispenser solenoid circuit fault/error.
Fisher & Paykel Dryer Error Code E71: Dryer Overloaded
The dryer drum is overloaded. Excess weight prevents items from tumbling freely, reducing drying efficiency and stressing the motor.
Frigidaire Washing Machine Error E75: Water Temperature Sensor Circuit Error
The control board detected an out-of-range or open-circuit reading from the water temperature sensor (NTC thermistor). Without an accurate temperature reading, the machine cannot control the wash temperature correctly and halts the cycle to prevent washing with water that is too hot or too cold.
Electrolux Washing Machine Error E75: Water Temperature Sensor Circuit Error
The control board detected an out-of-range or open-circuit reading from the water temperature sensor (NTC thermistor). Without an accurate temperature reading, the machine cannot control the wash temperature correctly and halts the cycle to prevent washing with water that is too hot or too cold.
Haier Washing Machine Error E8: Overflow — Water Level Above Warning Threshold
The washer has detected that the water level inside the drum has risen above the maximum safe level. The machine has stopped to prevent an overflow and will attempt to drain automatically.
Bosch Washing Machine Error E80: Drive Circuit Fault — Motor Electronics
There is a fault in the drive circuit that controls the drum motor. This is an electronics or motor failure.
Bosch Dishwasher Error Code E8000: Door Sensor Circuit Fault (Extended Code — Premium Models)
There is a door sensor circuit fault/error.
Thermador Dishwasher Error Code E8000: Door Sensor Circuit Fault (Extended Code — Premium Models)
There is a door sensor circuit fault/error.
Gaggenau Dishwasher Error Code E8000: Door Sensor Circuit Fault (Extended Code — Premium Models)
There is a door sensor circuit fault/error.
Frigidaire Dryer Error E8C: Overheating — Internal Temperature Too High
The dryer detected that the internal cabinet temperature has exceeded a safe threshold. This is a high-severity protective shutdown — the dryer halts immediately to prevent a fire or damage to the drum and electronics. E8C almost always points to a severe airflow restriction.
Electrolux Dryer Error E8C: Overheating — Internal Temperature Too High
The dryer detected that the internal cabinet temperature has exceeded a safe threshold. This is a high-severity protective shutdown — the dryer halts immediately to prevent a fire or damage to the drum and electronics. E8C almost always points to a severe airflow restriction.
Fisher & Paykel Dryer Error Code E9: Heater Thermistor Fault
The heater thermistor (temperature sensor for the heating element circuit) has reported a fault. This requires professional diagnosis.
HP ENVY 6000 / 6400 error E9
Printer setup or recovery did not complete successfully and the printer may remain offline.
Bosch Dryer Error Code E90
The dryer is usually reporting an electronics or communication issue.
Bosch Dishwasher Error Code E9001: Household Power Supply Voltage Too Low (Extended Code — Premium Models)
The house power supply to the unit is too low.
Thermador Dishwasher Error Code E9001: Household Power Supply Voltage Too Low (Extended Code — Premium Models)
The house power supply to the unit is too low.
Gaggenau Dishwasher Error Code E9001: Household Power Supply Voltage Too Low (Extended Code — Premium Models)
The house power supply to the unit is too low.
Bosch Dishwasher Error Code E9240: Dishwasher Filter Blocked (Extended Code — Premium Models)
The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
Thermador Dishwasher Error Code E9240: Dishwasher Filter Blocked (Extended Code — Premium Models)
The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
Gaggenau Dishwasher Error Code E9240: Dishwasher Filter Blocked (Extended Code — Premium Models)
The dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly.
Frigidaire Dryer Error E95: Communication Error Between Control Boards
The main control board and one or more secondary boards (motor control, display, or user interface) have lost communication with each other. The dryer halts the cycle because it cannot reliably control or monitor its components without board-to-board communication.
Frigidaire Washing Machine Error E95: Communication Error Between Control Boards
The main control board and one or more secondary boards (motor control board, display board, or user interface board) have lost communication. E95 indicates an internal electronics fault — the machine has halted the cycle because it cannot reliably control its components.
Electrolux Dryer Error E95: Communication Error Between Control Boards
The main control board and one or more secondary boards (motor control, display, or user interface) have lost communication with each other. The dryer halts the cycle because it cannot reliably control or monitor its components without board-to-board communication.
Electrolux Washing Machine Error E95: Communication Error Between Control Boards
The main control board and one or more secondary boards (motor control board, display board, or user interface board) have lost communication. E95 indicates an internal electronics fault — the machine has halted the cycle because it cannot reliably control its components.
Frigidaire Dryer Error EAF: Restricted Airflow or Blocked Vent
Frigidaire dryer error EAF usually means airflow through the lint screen, duct, or outside vent is restricted.
Electrolux Dryer Error EAF: Restricted Airflow — Clogged Lint Screen or Vent
The dryer's control board detected that airflow through the exhaust system is below the minimum required level. EAF is a direct warning that your lint screen, duct, or exterior vent is significantly restricted. Continuing to run the dryer in this state is a fire risk — the US Fire Administration reports that restricted dryer vents are a leading cause of house fires.
Frigidaire Dryer Error EC1: Thermal Fuse Tripped — Overheating Safety Shutdown
The dryer's thermal fuse — a one-time safety device — has tripped due to the dryer reaching an unsafe temperature. Once tripped, the thermal fuse permanently interrupts power to the heater circuit and will not reset. The dryer may continue to tumble but will produce no heat until the fuse is replaced. Critically, the thermal fuse must never be replaced without also identifying and fixing the cause of the overheating — otherwise the new fuse will trip again.
Electrolux Dryer Error EC1: Thermal Fuse Tripped — Overheating Safety Shutdown
The dryer's thermal fuse — a one-time safety device — has tripped due to the dryer reaching an unsafe temperature. Once tripped, the thermal fuse permanently interrupts power to the heater circuit and will not reset. The dryer may continue to tumble but will produce no heat until the fuse is replaced. Critically, the thermal fuse must never be replaced without also identifying and fixing the cause of the overheating — otherwise the new fuse will trip again.
Frigidaire Dryer Error EF1: Clogged Exhaust Vent or Thermal Limiter Fault
On Frigidaire and Electrolux dryers, EF1 indicates a restricted exhaust condition — airflow through the vent system is insufficient for safe operation, or the thermal limiter (a secondary overtemperature safety device on the heater assembly) has tripped. The dryer halts to prevent overheating.
Frigidaire Washing Machine Error EF1: Clogged Drain Pump
The front-load washer's drain pump filter (coin trap) is blocked with lint, debris, or a foreign object. EF1 is one of the most common error codes on front-load Frigidaire and Electrolux washers and is almost always resolved by cleaning the pump filter — a task that takes under 15 minutes.
Electrolux Dryer Error EF1: Exhaust Restriction or Thermal Limiter Fault
Electrolux dryer error EF1 usually means the exhaust path is restricted or the overheating safety device has been triggered.
Electrolux Washing Machine Error EF1: Clogged Drain Pump
The front-load washer's drain pump filter (coin trap) is blocked with lint, debris, or a foreign object. EF1 is one of the most common error codes on front-load Frigidaire and Electrolux washers and is almost always resolved by cleaning the pump filter — a task that takes under 15 minutes.
Frigidaire Washing Machine Error EF2: Too Much Soap or Suds
The front-load washer detected excessive suds during the cycle. Excess suds interfere with proper drum tumbling and rinsing, and can overflow into the machine's electronics. The machine adds extra rinses to clear the suds before continuing.
Electrolux Washing Machine Error EF2: Too Much Soap or Suds
The front-load washer detected excessive suds during the cycle. Excess suds interfere with proper drum tumbling and rinsing, and can overflow into the machine's electronics. The machine adds extra rinses to clear the suds before continuing.
LG Refrigerator Error EID: Freezer Ice Maker Sensor Failure
The temperature sensor inside the freezer ice maker has failed or is reading outside the expected range. The refrigerator cannot monitor the ice maker tray temperature and has disabled ice production to prevent a malfunction.
LG Refrigerator Error EIU: Ice Maker Assembly Failure
The ice maker assembly has reported a general internal fault. The unit is not functioning correctly and ice production has stopped.
Haier Refrigerator Error Er: Ice Maker Error
The ice maker has encountered a fault and stopped producing ice. The error covers a range of conditions from a simple water supply issue to a failed ice maker module.
Bosch Range Error ERR / toP: Temperature Error — Oven Too Hot
The range has detected an oven temperature error (ERR) or an overtemperature condition (toP — the oven is too hot). Both conditions trigger a safety shutoff.
Thermador Range Error ERR / toP: Temperature Error — Oven Too Hot
The range has detected an oven temperature error (ERR) or an overtemperature condition (toP — the oven is too hot). Both conditions trigger a safety shutoff.
Gaggenau Range Error ERR / toP: Temperature Error — Oven Too Hot
The range has detected an oven temperature error (ERR) or an overtemperature condition (toP — the oven is too hot). Both conditions trigger a safety shutoff.
LG Dryer Error F0: Lint Filter Not Inserted
The dryer has detected that the lint filter is missing or not properly seated. The cycle will not start until the lint filter is correctly installed. Running without a lint filter allows lint to enter the exhaust duct, creating a fire hazard.
GE Appliances Oven Error F0: Keypanel or Touchpad Problem
The oven has detected a fault in the keypanel or touchpad — a button may be stuck in the pressed position, or the touchpad circuit has developed a short. The oven will not accept commands until the fault is resolved.
Miele Refrigerator Error F0: BioFresh Sensor Fault
The refrigerator has detected a fault with the BioFresh or fresh air sensor. This applies to Miele models equipped with a BioFresh drawer. The sensor monitors conditions in the BioFresh compartment and a fault here prevents optimal humidity and temperature control in that zone.
Miele Dishwasher Error F01: NTC Sensor Short-Circuit — Heating Disabled
The dishwasher has detected a short-circuit in the NTC water temperature sensor. Heating has been deactivated and rinse aid dispensing may be affected. The machine cannot confirm water temperature and has stopped the cycle.
Fisher & Paykel Washing Machine Error Code F01: Electronic Control Board Fault
The washer has detected an internal fault with the electronic control board. This code points to a problem with the main circuit board that controls the wash cycle, and cannot be resolved by the user.
Fisher & Paykel Washing Machine Error Code F02: Motor Circuit Fault
The washer has detected a fault in the motor circuit. This indicates an electrical problem between the control board and the drive motor, or a failure of the motor itself.
Fisher & Paykel Washing Machine Error Code F03: Temperature Sensor (Thermistor) Fault
The washer's temperature sensor (thermistor) has reported a reading outside the expected range. The washer cannot accurately monitor water temperature, which prevents heated wash cycles from completing safely.
Fisher & Paykel Washing Machine Error Code F04: Motor Fault
The washer has detected a direct fault with the drive motor. The motor is not responding correctly to control commands, which may prevent the drum from spinning or agitating.
Fisher & Paykel Washing Machine Error Code F05: Drain Blocked or Pump Issue
The washer cannot drain water within the expected time. This is most commonly caused by a blockage in the drain filter or hose rather than a pump failure, making it one of the more user-fixable Fisher & Paykel fault codes.
Fisher & Paykel Washing Machine Error Code F06: Door Lock Fault
The washer cannot confirm that the door is properly locked. The door lock mechanism is a safety device — the washer will not spin or agitate unless the door is securely locked.
LG Oven Error F1: Upper Oven Thermistor Error — Open Circuit
The upper oven temperature sensor (thermistor) is reading an open circuit — its resistance is outside the valid range, meaning the oven cannot monitor temperature in the upper cavity.
Frigidaire Oven Error F1: Shorted Keypad — Control Panel Fault
The oven's control board has detected a stuck or shorted key on the keypad. One or more buttons on the control panel are registering as continuously pressed, preventing the oven from operating normally. This may be caused by physical damage to the keypad overlay or an internal failure of the touchpad membrane.
Electrolux Oven Error F1: Shorted Keypad — Control Panel Fault
The oven's control board has detected a stuck or shorted key on the keypad. One or more buttons on the control panel are registering as continuously pressed, preventing the oven from operating normally. This may be caused by physical damage to the keypad overlay or an internal failure of the touchpad membrane.
Miele Refrigerator Error F1: Refrigerating Chamber Temperature Sensor Fault
The refrigerator has detected a fault with the main refrigerating chamber temperature sensor (NTC). The unit cannot accurately monitor the fresh food compartment temperature. This is a high-severity code — move perishable food if the fault persists.
Miele Washing Machine Error F1: NTC Temperature Sensor Short-Circuit
The washer has detected a short-circuit in the NTC temperature sensor. The machine cannot accurately measure water temperature and has stopped the cycle to prevent damage.
Haier Refrigerator Error F1: Temperature Sensor Error
The refrigerator has detected a fault with one or more temperature sensors. Variants F2 through F5 indicate sensor faults in different locations or compartments. The machine cannot accurately monitor internal temperatures and has flagged this for service attention.
Fisher & Paykel DishDrawer Error Code F1: Leak Detected — Flood Switch Triggered
Water has entered the base of the dishwasher and triggered the flood protection switch. The dishwasher will not operate until the water is cleared and the fault is resolved. This is a high-severity fault requiring immediate attention.
Fisher & Paykel oven Error Code F1: Ambient Temperature Too High
The temperature around the oven's electronics has exceeded 85 °C (185 °F). This usually happens when the oven is installed in a very hot kitchen or when cabinet ventilation is blocked, allowing heat to build up around the control electronics.
LG Oven Error F10: Door Locking System Failure
The oven door lock mechanism has failed to operate correctly during a self-clean cycle attempt. The door is either not locking when commanded to or has locked and will not unlock.
Frigidaire Oven Error F10: Thermal Runaway or Overheating
Frigidaire oven error F10 usually means the oven is overheating or thinks it is overheating.
Electrolux Oven Error F10: Thermal Runaway or Overheating
Electrolux oven error F10 usually means the oven is overheating or thinks it is overheating.
Miele Oven Error F10: Water Inlet Fault (Steam Oven)
The steam oven cannot draw water from the water container to generate steam. The water supply to the steam generator is insufficient or has been interrupted. This code applies to Miele steam ovens (DG/DGC series).
Miele Washing Machine Error F10: Water Inlet Blocked or Restricted
The washer is not receiving adequate water. The drum did not fill to the required level within the allotted time, indicating a restriction in the water supply.
LG Oven Error F11: Communication Error — Control Panel to Main Board
The oven's display/control panel and the main control board have lost communication. The two boards cannot exchange data, so the oven cannot accept commands or display status correctly.
Miele Dishwasher Error F11: Water Cannot Drain
The dishwasher is unable to drain water from the wash cabinet. Water is still present in the tub at the end of a drain cycle. This applies to Miele G 1xxx through G 6xxx series models.
Miele Oven Error F11: Water Cannot Drain from Steam Generator
The steam generator cannot empty its residual water after the cooking cycle. The drain path is blocked or the drain pump is unable to operate. This fault is common on steam ovens used with hard water that has not been descaled regularly. This code applies to Miele steam ovens (DG/DGC series).
Miele Washing Machine Error F11: Drain Restricted
The washer attempted to drain during the cycle but water was not fully expelled within the expected time. A restriction somewhere in the drain path is preventing proper drainage.
Miele Dishwasher Error F12: Water Intake Issue at Program Start
The dishwasher failed to fill with water at the beginning of a program step. The machine did not detect sufficient water entering the tub within the expected time.
Frigidaire Oven Error F13: EEPROM Memory Failure — Control Board Fault
The oven's control board has detected a failure in the EEPROM (non-volatile memory) chip that stores calibration data, settings, and operational parameters. The board cannot read or write to this memory reliably, which prevents normal oven operation. F12 and F13 are used interchangeably across different Frigidaire and Electrolux model years to indicate the same EEPROM fault.
Electrolux Oven Error F13: EEPROM Memory Failure — Control Board Fault
The oven's control board has detected a failure in the EEPROM (non-volatile memory) chip that stores calibration data, settings, and operational parameters. The board cannot read or write to this memory reliably, which prevents normal oven operation. F12 and F13 are used interchangeably across different Frigidaire and Electrolux model years to indicate the same EEPROM fault.
Miele Dishwasher Error F13: Water Inlet Valve Defective
The dishwasher's water inlet valve has been identified as defective. The valve is not opening or closing correctly, preventing the dishwasher from filling normally.
Miele Dishwasher Error F14: Heater Pressure Switch Issue
The dishwasher has detected a fault with the heater pressure switch. This switch monitors water level in relation to the heating element, and a fault here prevents safe heating operation.
Miele Washing Machine Error F15: Fault in Hot Water Intake
The washer has detected a fault with the hot water supply connection. The machine cannot draw hot water as expected, which may affect wash performance on temperature-sensitive cycles.
Fisher & Paykel Refrigerator Error Code F15: Refrigerator Compartment Fan Problem
The fan that circulates air through the refrigerator compartment has reported a fault. Without this fan, cold air cannot be distributed through the fridge and temperatures will rise.
Bosch Washing Machine Error F16: Door Not Locked Properly (F-Code Variant)
Same fault as E16 — the door is not fully closed and locked. F-prefix codes appear on certain Bosch washing machine model ranges.
LG Oven Error F16: Oven Sensor Reading Out of Range
LG oven error F16 usually means the oven temperature sensor is reading outside the expected range.
Miele Washing Machine Error F16: Excess Detergent Detected
The washer has detected excessive suds in the drum. Too much foam prevents the drum from spinning safely and rinsing laundry properly. The machine may run extra rinse cycles to clear the suds before displaying F16.
Bosch Washing Machine Error F17: Water Inlet Filters Blocked or AquaStop Activated (F-Code Variant)
Same fault as E17 — water inlet issue on F-code model variants.
LG Oven Error F17: Convection Fan Error — Feedback Fault
The oven's convection fan is not providing the expected speed feedback signal to the control board. The fan may be running slowly, stalling intermittently, or the feedback sensor has failed.
Fisher & Paykel Refrigerator Error Code F17: Freezer Fan Malfunction
The freezer compartment fan has malfunctioned. This fan circulates cold air from the evaporator through the freezer. Without it, the freezer temperature will rise and frozen food will begin to thaw.
Bosch Washing Machine Error F18: Drainage Hose Blocked or Kinked (F-Code Variant)
Same fault as E18 — drainage hose blockage or positioning issue on F-code models.
LG Oven Error F18: Meat Probe Error — Probe Not Detected or Out of Range
The meat probe (temperature probe) is either not connected correctly, has been left in its storage holder while a probe-required mode is active, or has failed.
Miele Dishwasher Error F18: Flow Meter Stationary — Insufficient Water Flow
The dishwasher's flow meter is reading zero or near-zero water flow when the machine expects water to be entering. The machine has stopped because it cannot confirm water is reaching the wash system.
LG Oven Error F19: Oven Cannot Hold Temperature
LG oven error F19 usually means the oven can heat up, but it is not maintaining the set temperature reliably.
Miele Washing Machine Error F19: Slow Flow Meter — Water Flow Sensor Fault
The washer's flow meter is detecting water entering the machine more slowly than expected. The machine pauses the cycle because the fill rate is below the minimum threshold required for safe operation.
Whirlpool Oven Error F1E0: Oven Temperature Sensor Failure
Whirlpool oven error F1E0 usually means the oven temperature sensor is reading outside its expected range.
Maytag Oven Error F1E0: Oven Temperature Sensor Failure
Maytag oven error F1E0 usually means the oven temperature sensor is reading outside its expected range.
KitchenAid Oven Error F1E0: Oven Temperature Sensor Failure
KitchenAid oven error F1E0 usually means the oven temperature sensor is reading outside its expected range.
Whirlpool Dishwasher Error F1E1: Water Detected in Base — Protective Shutdown
Water has been detected in the base (drip tray) of the dishwasher. The machine has initiated a drain sequence and locked itself out of further operation to protect the motor and electronics. This is a safety shutdown, not a soft error.
Maytag Dishwasher Error F1E1: Water Detected in Base — Protective Shutdown
Water has been detected in the base (drip tray) of the dishwasher. The machine has initiated a drain sequence and locked itself out of further operation to protect the motor and electronics. This is a safety shutdown, not a soft error.
KitchenAid Dishwasher Error F1E1: Water Detected in Base — Protective Shutdown
Water has been detected in the base (drip tray) of the dishwasher. The machine has initiated a drain sequence and locked itself out of further operation to protect the motor and electronics. This is a safety shutdown, not a soft error.
Bosch Cooktop Error F2: Cooking Zone Overheating
A cooktop zone has detected an overtemperature condition — the cooking surface or cookware temperature has exceeded the safety limit and the zone has switched off.
LG Oven Error F2: Upper Oven Thermistor Error — Overtemperature
The upper oven temperature sensor has detected a temperature that is dangerously high, or the sensor is reading a shorted condition that makes the oven's control board believe the temperature is above a safe threshold.
GE Oven Error F2: Oven Temperature Too High
GE oven error F2 usually means the oven detected unsafe overheating and shut itself down to prevent damage or fire risk.
Frigidaire Washing Machine Error F2: Excessive Suds or Drainage Issue
On top-load models, F2 indicates the machine detected excessive suds that are preventing proper draining, or that the drainage cycle is taking longer than expected. The machine adds extra rinses to clear the suds before continuing.
Electrolux Washing Machine Error F2: Excessive Suds or Drainage Issue
On top-load models, F2 indicates the machine detected excessive suds that are preventing proper draining, or that the drainage cycle is taking longer than expected. The machine adds extra rinses to clear the suds before continuing.
Miele Refrigerator Error F2: Faulty Evaporator Sensor
The refrigerator has detected a fault with the evaporator temperature sensor. The evaporator sensor monitors the cooling coil temperature to ensure the refrigeration cycle is operating correctly. A fault here can affect cooling efficiency across all compartments.
Thermador Cooktop Error F2: Cooking Zone Overheating
A cooktop zone has detected an overtemperature condition — the cooking surface or cookware temperature has exceeded the safety limit and the zone has switched off.
Fisher & Paykel DishDrawer Error Code F2: Wash Motor Fault
The wash motor (circulation pump) has stalled or failed. The motor drives water through the spray arms during the wash cycle — without it, no washing occurs.
Fisher & Paykel oven Error Code F2: Cavity Temperature Too High During Self-Clean
During a pyrolytic self-cleaning cycle, the oven cavity temperature has exceeded safe limits. The oven will lock the door and halt the cycle automatically. This is a safety cut-out — do not attempt to force the door open.
Fisher & Paykel Refrigerator Error Code F2: Defrost System Fault
The refrigerator's defrost system has failed or previous automatic defrost cycles were aborted. Without successful defrosting, frost builds up on the evaporator coils, eventually blocking airflow and causing the fridge to lose cooling ability.
Gaggenau Cooktop Error F2: Cooking Zone Overheating
A cooktop zone has detected an overtemperature condition — the cooking surface or cookware temperature has exceeded the safety limit and the zone has switched off.
LG Oven Error F20: Door Lock Failure — Lock Will Not Release
The oven door lock engaged correctly during a self-clean cycle but is now failing to release after the cycle has completed and the oven has cooled. The door remains locked even though the oven is cool.
Miele Oven Error F20: Steam Oven Not Heating
The steam oven has failed to reach the required temperature during a steam or combination steam cooking cycle. The heating system is not operating correctly. This code applies to Miele steam ovens (DG/DGC series).
Miele Washing Machine Error F20: Heating Malfunction
The washer has detected a heating malfunction. The water temperature is not rising as expected, indicating a failure in the heating circuit. Miele machines use precise temperature control, and this code stops the cycle when heating cannot be confirmed.
Fisher & Paykel Refrigerator Error Code F20: Flapper Heater Defective
The flapper heater — a small heater that prevents the air damper (flapper) between compartments from freezing shut — has been detected as defective. A frozen flapper prevents temperature regulation between compartments.
Miele Refrigerator Error F22: Temperature Control Fault
The refrigerator has detected a general temperature control fault. The unit cannot maintain the set temperature correctly, which may be caused by a control board issue or a thermistor failure. This is a high-severity code — food safety may be affected.
Miele Dishwasher Error F24: Circulation Pump Malfunction or Heater Relay Error
The dishwasher has detected a malfunction in the circulation pump or a fault in the heater relay on the control board. The circulation pump moves water through the spray arms during the wash cycle — if it fails, dishes will not be washed.
Fisher & Paykel Refrigerator Error Code F24: Ice Maker Sensor Failure
The ice maker's temperature sensor has failed or reported an out-of-range reading. The ice maker may stop producing ice or behave erratically.
LG Oven Error F27: Cooling Fan Stalled
LG oven error F27 usually means the cooling fan is not spinning normally, so the oven has stopped high-heat operation to protect the controls.
Bosch Washing Machine Error F29: Water Inlet Issue or AquaStop Activated (F29)
Same cause class as E17/F17 — the machine cannot fill. F29 often indicates AquaStop specifically or a flow meter issue on certain models.
Miele Washing Machine Error F29: Heater Issue
The washer has detected a fault in the heating circuit. This code is closely related to F20 and indicates a heating circuit malfunction that prevents the machine from reaching or maintaining the selected wash temperature.
LG Oven Error F3: Touch Pad or Key Sensor Error
The oven's control panel has detected a faulty key or touch sensor — a button is either stuck in a continuously pressed state, or a touch pad sensor is malfunctioning.
GE Oven Error F3: Oven Temperature Sensor Needs Replacement
GE oven error F3 usually means the oven temperature sensor is reading out of range.
Frigidaire Oven Error F3: Communication Error Between Control Boards
The oven's main control board has lost communication with one of its subsidiary boards — typically the user interface board (UI board) or an auxiliary control module. F20 and F26 cover specific communication bus faults within this same category and are treated identically. The oven will not operate until communication is restored.
Electrolux Oven Error F3: Communication Error Between Control Boards
The oven's main control board has lost communication with one of its subsidiary boards — typically the user interface board (UI board) or an auxiliary control module. F20 and F26 cover specific communication bus faults within this same category and are treated identically. The oven will not operate until communication is restored.
Miele Refrigerator Error F3: Faulty Freezer Compartment Air Sensor
The refrigerator has detected a fault with the air sensor in the freezer compartment. The sensor monitors freezer air temperature to maintain proper frozen food storage conditions. If this sensor fails, the freezer may not maintain safe temperatures.
Fisher & Paykel DishDrawer Error Code F3: Temperature Sensor Fault
The thermistor (temperature sensor) in the wash sump has reported a reading outside the expected range. The dishwasher cannot accurately monitor water temperature.
Fisher & Paykel oven Error Code F3: Oven Cavity Overtemperature
The oven cavity has exceeded 305 °C (581 °F) during normal cooking — outside the self-clean mode. This indicates the temperature control system has failed and the oven cannot regulate heat properly. The oven will shut down for safety.
Frigidaire Oven Error F30: Open Temperature Probe Circuit
Frigidaire oven error F30 usually means the oven temperature probe circuit is open or disconnected.
Electrolux Oven Error F30: Open Temperature Probe Circuit
Electrolux oven error F30 usually means the oven temperature probe circuit is open or disconnected.
Fisher & Paykel Refrigerator Error Code F30: Display Module Fault
The display module (control panel) has reported a fault. This may be an intermittent electronics issue or a hardware failure of the display board.
Frigidaire Oven Error F31: Shorted Temperature Probe — Sensor Reading Too Low
The oven's control board is detecting a shorted condition in the oven temperature sensor circuit. The sensor is reading an abnormally low resistance, which the control board interprets as a temperature far outside the oven's operating range. F31 is the complement to F30: F30 is an open circuit, F31 is a shorted (low-resistance) circuit.
Electrolux Oven Error F31: Shorted Temperature Probe — Sensor Reading Too Low
The oven's control board is detecting a shorted condition in the oven temperature sensor circuit. The sensor is reading an abnormally low resistance, which the control board interprets as a temperature far outside the oven's operating range. F31 is the complement to F30: F30 is an open circuit, F31 is a shorted (low-resistance) circuit.
Miele Oven Error F31: Cooktop Technical Fault
The cooktop has detected an internal technical fault in its electronic control system. The cooktop will not operate until the fault is resolved. This code applies to Miele induction and electric cooktops.
Bosch Washing Machine Error F32: Imbalance Detected — Spin Cycle Reduced (F-Code Variant)
Same fault as E32 — imbalance detected on F-code model variants.
Bosch Washing Machine Error F33: Excess Detergent Foam Detected (F-Code Variant)
Same fault as E33 — excess foam on F-code model variants.
Bosch Washing Machine Error F34: Door Not Locked Properly (F34 Variant)
Same fault as E16/F16/E34 — door lock error on specific Bosch model variants.
Miele Washing Machine Error F34: Door Lock Fault
The washer has detected a problem with the door locking mechanism. The machine cannot confirm the door is properly secured and has stopped or will not start the cycle.
Miele Washing Machine Error F35: Door Lock Jammed — Cannot Unlock
The washer door has locked during a cycle and cannot be unlocked by the normal mechanism. The machine has stopped the cycle and is reporting that the door release has failed.
GE Oven Error F350: Upper Cooling Fan Circuit Issue or Obstruction
GE oven error F350 usually means the upper cooling fan is not moving air correctly.
Miele Dryer Error F36: Door Switch Defective
The dryer has detected that the door switch (microswitch) is defective. The dryer cannot confirm the door is properly closed and will not start or has stopped mid-cycle.
Miele Washing Machine Error F37: Door Unlock Fault
The washer has detected a fault specifically in the door unlock mechanism. The machine cannot release the door lock after the cycle, indicating a failure in the solenoid or wiring responsible for unlocking.
LG Oven Error F38: Communication Error — Main Board to Inverter Board
The main control board and the inverter board (which controls the induction cooktop or convection motor on applicable models) have lost communication. Induction cooking or convection may be unavailable.
Miele Refrigerator Error F383: Refrigeration System Fault
The refrigerator has detected a fault in the refrigeration system itself. Codes F383, F384, and F385 all indicate sealed system or compressor-level faults. These are the most serious refrigerator fault codes — move all food immediately and contact Miele service.
Whirlpool Refrigerator Error F3E1: Fresh Food Thermistor Failure
Whirlpool refrigerator error F3E1 usually means the fresh-food temperature sensor is reading out of range.
Maytag Refrigerator Error F3E1: Fresh Food Thermistor Failure
Maytag refrigerator error F3E1 usually means the fresh-food temperature sensor is reading out of range.
KitchenAid Refrigerator Error F3E1: Fresh Food Thermistor Failure
KitchenAid refrigerator error F3E1 usually means the fresh-food temperature sensor is reading out of range.
Whirlpool Oven Error F3E2: Oven Sensor Open or Shorted
Whirlpool oven error F3E2 usually means the oven temperature sensor circuit is open or shorted.
Whirlpool Refrigerator Error F3E2: Freezer Thermistor Failure
Whirlpool refrigerator error F3E2 usually means the freezer temperature sensor is reading out of range.
Maytag Oven Error F3E2: Oven Sensor Open or Shorted
Maytag oven error F3E2 usually means the oven temperature sensor circuit is open or shorted.
Maytag Refrigerator Error F3E2: Freezer Thermistor Failure
Maytag refrigerator error F3E2 usually means the freezer temperature sensor is reading out of range.
KitchenAid Oven Error F3E2: Oven Sensor Open or Shorted
KitchenAid oven error F3E2 usually means the oven temperature sensor circuit is open or shorted.
KitchenAid Refrigerator Error F3E2: Freezer Thermistor Failure
KitchenAid refrigerator error F3E2 usually means the freezer temperature sensor is reading out of range.
Whirlpool Refrigerator Error F3E4: Freezer Defrost Thermistor or Humidity Sensor Failure
The sensor used to monitor the freezer defrost cycle — which may be a defrost thermistor, a bi-metal thermostat, or a humidity sensor depending on the model — is reading outside of its expected range. The defrost cycle cannot be controlled correctly.
Maytag Refrigerator Error F3E4: Freezer Defrost Thermistor or Humidity Sensor Failure
The sensor used to monitor the freezer defrost cycle — which may be a defrost thermistor, a bi-metal thermostat, or a humidity sensor depending on the model — is reading outside of its expected range. The defrost cycle cannot be controlled correctly.
KitchenAid Refrigerator Error F3E4: Freezer Defrost Thermistor or Humidity Sensor Failure
The sensor used to monitor the freezer defrost cycle — which may be a defrost thermistor, a bi-metal thermostat, or a humidity sensor depending on the model — is reading outside of its expected range. The defrost cycle cannot be controlled correctly.
Whirlpool Refrigerator Error F3E8: Freezer Evaporator Thermistor Failure
The thermistor positioned at the freezer evaporator coil — used to measure the temperature of the coil itself, not the air in the compartment — is reading outside normal range. This affects the control board's ability to manage the cooling cycle.
Maytag Refrigerator Error F3E8: Freezer Evaporator Thermistor Failure
The thermistor positioned at the freezer evaporator coil — used to measure the temperature of the coil itself, not the air in the compartment — is reading outside normal range. This affects the control board's ability to manage the cooling cycle.
KitchenAid Refrigerator Error F3E8: Freezer Evaporator Thermistor Failure
The thermistor positioned at the freezer evaporator coil — used to measure the temperature of the coil itself, not the air in the compartment — is reading outside normal range. This affects the control board's ability to manage the cooling cycle.
Whirlpool Refrigerator Error F3E9: Fresh Food Evaporator Thermistor Failure
The thermistor positioned at the fresh food evaporator coil (on models with a dedicated fresh food cooling circuit) is reading outside acceptable range. The control board cannot accurately regulate cooling in the fresh food section.
Maytag Refrigerator Error F3E9: Fresh Food Evaporator Thermistor Failure
The thermistor positioned at the fresh food evaporator coil (on models with a dedicated fresh food cooling circuit) is reading outside acceptable range. The control board cannot accurately regulate cooling in the fresh food section.
KitchenAid Refrigerator Error F3E9: Fresh Food Evaporator Thermistor Failure
The thermistor positioned at the fresh food evaporator coil (on models with a dedicated fresh food cooling circuit) is reading outside acceptable range. The control board cannot accurately regulate cooling in the fresh food section.
Whirlpool Refrigerator Error F3EC: Ambient / Room Temperature Thermistor Failure
The sensor that measures the ambient room temperature around the refrigerator is reading outside expected range. The control board uses this reading to adjust compressor and fan speed for room conditions. A faulty ambient sensor can cause the refrigerator to run inefficiently.
Maytag Refrigerator Error F3EC: Ambient / Room Temperature Thermistor Failure
The sensor that measures the ambient room temperature around the refrigerator is reading outside expected range. The control board uses this reading to adjust compressor and fan speed for room conditions. A faulty ambient sensor can cause the refrigerator to run inefficiently.
KitchenAid Refrigerator Error F3EC: Ambient / Room Temperature Thermistor Failure
The sensor that measures the ambient room temperature around the refrigerator is reading outside expected range. The control board uses this reading to adjust compressor and fan speed for room conditions. A faulty ambient sensor can cause the refrigerator to run inefficiently.
Bosch Cooktop Error F4: Temperature Sensor Open Circuit
The cooktop's temperature sensor for one or more zones has an open-circuit fault — the sensor wire has broken or the sensor itself has failed, and the zone cannot measure surface temperature.
LG Oven Error F4: Lower Oven Thermistor Error — Open Circuit
The lower oven cavity temperature sensor (thermistor) is reading an open circuit on double-oven models. The lower oven cannot monitor temperature and the lower cavity is disabled.
Thermador Cooktop Error F4: Temperature Sensor Open Circuit
The cooktop's temperature sensor for one or more zones has an open-circuit fault — the sensor wire has broken or the sensor itself has failed, and the zone cannot measure surface temperature.
Fisher & Paykel DishDrawer Error Code F4: Heating Element Fault
The heating element or its associated temperature sensor has failed. The dishwasher cannot heat water to the required wash or sanitize temperature.
Fisher & Paykel oven Error Code F4: Power Module Failure
The oven's power module — the board that controls the heating elements — has detected an internal fault. The oven will not heat until the module is repaired or replaced.
Gaggenau Cooktop Error F4: Temperature Sensor Open Circuit
The cooktop's temperature sensor for one or more zones has an open-circuit fault — the sensor wire has broken or the sensor itself has failed, and the zone cannot measure surface temperature.
Frigidaire Oven Error F40: Cooktop Lockout — Surface Burners Disabled
The cooktop surface elements have been locked out by the control system. F40 and F41 indicate that the cooktop lockout feature is active — no surface burner or element will respond to knob or touch inputs while this code is displayed. This is most commonly triggered by a control board detecting an unsafe condition on the cooktop, or by the cooktop lock feature being engaged.
Electrolux Oven Error F40: Cooktop Lockout — Surface Burners Disabled
The cooktop surface elements have been locked out by the control system. F40 and F41 indicate that the cooktop lockout feature is active — no surface burner or element will respond to knob or touch inputs while this code is displayed. This is most commonly triggered by a control board detecting an unsafe condition on the cooktop, or by the cooktop lock feature being engaged.
LG Oven Error F42: Voltage Error — Supply Voltage Out of Range
The oven has detected that the incoming supply voltage is either too high or too low. Electric ranges require a stable 240V supply (two 120V legs) — a missing or weak leg will trigger F42.
Whirlpool Refrigerator Error F4E1: Defrost Heater Circuit Failure
Whirlpool refrigerator error F4E1 usually means the defrost heater circuit is not working as expected.
Maytag Refrigerator Error F4E1: Defrost Heater Circuit Failure
Maytag refrigerator error F4E1 usually means the defrost heater circuit is not working as expected.
KitchenAid Refrigerator Error F4E1: Defrost Heater Circuit Failure
KitchenAid refrigerator error F4E1 usually means the defrost heater circuit is not working as expected.
Bosch Cooktop Error F5: Temperature Sensor Fault or Safety Timeout
F5 covers two distinct conditions: (1) a temperature sensor has a short-circuit fault — the sensor is reading incorrectly, or (2) a cooking zone has automatically switched off after approximately 2 hours of continuous use as a safety measure.
LG Oven Error F5: Lower Oven Thermistor Error — Overtemperature
The lower oven temperature sensor is reading a shorted condition or the lower oven cavity has exceeded a safe operating temperature.
GE Appliances Oven Error F5: Electronic Control Needs Replacement
The electronic range control (ERC) has detected an internal failure. The control board cannot operate reliably and must be replaced. Also indicated by F8 or FF on some GE models.
Haier Dishwasher Error F5: Sensor Error or Upper Lid Assist Fault
The dishwasher has detected a fault with an internal sensor or the upper lid assist mechanism. On drawer models, this may indicate that the lid or door is not operating correctly. On standard models, it points to a sensor circuit fault.
Thermador Cooktop Error F5: Temperature Sensor Fault or Safety Timeout
F5 covers two distinct conditions: (1) a temperature sensor has a short-circuit fault — the sensor is reading incorrectly, or (2) a cooking zone has automatically switched off after approximately 2 hours of continuous use as a safety measure.
Fisher & Paykel DishDrawer Error Code F5: Drawer Lid Fault — Lid Not Sealing Correctly
The DishDrawer's lid (the door that seals when the drawer is closed) is not seating correctly, or the lid actuators are stuck or misaligned. This is specific to Fisher & Paykel's DishDrawer design.
Fisher & Paykel oven Error Code F5: Clock–Power Module Communication Error
The clock/control module and the power module are not communicating correctly. This can result in the oven not responding to settings or not heating even when programmed.
Gaggenau Cooktop Error F5: Temperature Sensor Fault or Safety Timeout
F5 covers two distinct conditions: (1) a temperature sensor has a short-circuit fault — the sensor is reading incorrectly, or (2) a cooking zone has automatically switched off after approximately 2 hours of continuous use as a safety measure.
Miele Dryer Error F50: General Control Error
The dryer has detected a general control system error. This can result from a control board glitch, a power surge, or an interrupted cycle. F50 is often a transient fault that clears with a power cycle.
Miele Washing Machine Error F51: Motor Control Fault
The washer has detected a fault in the motor control system. The motor is not responding correctly to control signals, and the machine has stopped the cycle to prevent further damage.
Miele Washing Machine Error F53: Speed Sensor Fault — Tachometer
The washer has detected a fault with the tachometer (speed sensor). The motor speed cannot be accurately measured, so the machine stops the cycle to prevent the drum from running at an incorrect or unsafe speed.
Miele Dryer Error F55: Laundry Not Dry After Maximum Time
The dryer ran for the maximum allowed time (180 minutes) but the moisture sensors detected that laundry is still damp. The machine stopped to prevent overheating rather than continuing indefinitely.
Whirlpool Washing Machine Error F5E2: Door Lock Failure
The washer's control board attempted to lock the door but did not receive confirmation that the lock engaged within the allowed time. The cycle cannot start until the door locks securely.
Maytag Washing Machine Error F5E2: Door Lock Failure
The washer's control board attempted to lock the door but did not receive confirmation that the lock engaged within the allowed time. The cycle cannot start until the door locks securely.
LG Oven Error F6: Upper Oven Heating Error — Not Reaching Temperature
The upper oven is not reaching the set temperature within the expected time. The bake or broil heating element or its control circuit has failed.
Fisher & Paykel DishDrawer Error Code F6: Water Fill Error — Not Receiving Water
The dishwasher did not receive enough water within the expected fill time. This is usually caused by a supply issue rather than a dishwasher fault.
Miele Dishwasher Error F600: AutoDos Dispensing Outlet Fault
The dishwasher has detected a fault with the AutoDos automatic detergent dispensing system. The drain pump activates and the wash program is cancelled when this code appears. AutoDos is Miele's built-in automatic powder detergent system.
Miele Dryer Error F66: Ventilation Issue — Restricted Airflow
The dryer has detected restricted airflow in the ventilation system. Blocked or restricted airflow prevents the dryer from exhausting hot, moist air properly, causing the machine to overheat and stop for safety. Restricted airflow is a fire risk — treat this code seriously.
Whirlpool Dishwasher Error F6E1: Unable to Start or Resume Cycle
The dishwasher has encountered a condition that prevents new cycles from starting. A cycle already in progress will run to completion, but the machine will not accept a new cycle start command until the fault is cleared.
Whirlpool Refrigerator Error F6E1: Ice Maker or Water Inlet Valve Communication Issue
The control board has detected a communication fault with the ice maker assembly or the water inlet valve. The ice maker may stop producing ice, or the water dispenser may stop working. Refrigeration is not affected.
Maytag Dishwasher Error F6E1: Unable to Start or Resume Cycle
The dishwasher has encountered a condition that prevents new cycles from starting. A cycle already in progress will run to completion, but the machine will not accept a new cycle start command until the fault is cleared.
Maytag Refrigerator Error F6E1: Ice Maker or Water Inlet Valve Communication Issue
The control board has detected a communication fault with the ice maker assembly or the water inlet valve. The ice maker may stop producing ice, or the water dispenser may stop working. Refrigeration is not affected.
KitchenAid Dishwasher Error F6E1: Unable to Start or Resume Cycle
The dishwasher has encountered a condition that prevents new cycles from starting. A cycle already in progress will run to completion, but the machine will not accept a new cycle start command until the fault is cleared.
KitchenAid Refrigerator Error F6E1: Ice Maker or Water Inlet Valve Communication Issue
The control board has detected a communication fault with the ice maker assembly or the water inlet valve. The ice maker may stop producing ice, or the water dispenser may stop working. Refrigeration is not affected.
Whirlpool Dishwasher Error F6E3: Excessive Suds Detected
The dishwasher has detected too much foam or suds in the tub. The cycle has paused to allow the suds to dissipate. This is typically caused by using the wrong type of detergent.
Maytag Dishwasher Error F6E3: Excessive Suds Detected
The dishwasher has detected too much foam or suds in the tub. The cycle has paused to allow the suds to dissipate. This is typically caused by using the wrong type of detergent.
KitchenAid Dishwasher Error F6E3: Excessive Suds Detected
The dishwasher has detected too much foam or suds in the tub. The cycle has paused to allow the suds to dissipate. This is typically caused by using the wrong type of detergent.
Whirlpool Dishwasher Error F6E4: Leveling Issue — Overfill Float Triggered
The dishwasher's overfill protection float has been triggered, either because the machine is not level and water is pooling to one side, or because the float switch itself is stuck or obstructed.
Maytag Dishwasher Error F6E4: Leveling Issue — Overfill Float Triggered
The dishwasher's overfill protection float has been triggered, either because the machine is not level and water is pooling to one side, or because the float switch itself is stuck or obstructed.
KitchenAid Dishwasher Error F6E4: Leveling Issue — Overfill Float Triggered
The dishwasher's overfill protection float has been triggered, either because the machine is not level and water is pooling to one side, or because the float switch itself is stuck or obstructed.
LG Oven Error F7: Upper Convection Fan Error
The convection fan in the upper oven cavity is not running at the expected speed or has stalled. Convection mode will not work correctly, but standard bake may still function.
Haier Washing Machine Error F7: Motor Circuit Error
The washer has detected a fault in the drum drive motor or motor control circuit. The motor is not operating within expected parameters and the machine cannot safely continue the cycle.
Fisher & Paykel DishDrawer Error Code F7: Drain Fault — Not Draining
The dishwasher cannot drain water within the expected time. This is often caused by a filter blockage or hose kink rather than a pump failure.
Fisher & Paykel oven Error Code F7: Door Lock Fault
The door locking mechanism has not engaged or released correctly. This can occur at the start or end of a self-clean cycle, or if the latch is obstructed. The oven may refuse to start a self-clean cycle or may leave the door locked after one.
Miele Dishwasher Error F78: Circulation Pump Fault — Possible Dry Pump on First Use
The dishwasher has detected a circulation pump fault. On first use or after a long period without use, this can occur if the pump ran dry. On established units it indicates a pump obstruction or motor issue.
Whirlpool Washing Machine Error F7E1: Motor Speed Sensing Error
The control board is not receiving a valid speed signal from the motor. The motor may be running but the tachometer (speed sensor) is not reporting correctly, or the motor itself has stalled.
Maytag Washing Machine Error F7E1: Motor Speed Sensing Error
The control board is not receiving a valid speed signal from the motor. The motor may be running but the tachometer (speed sensor) is not reporting correctly, or the motor itself has stalled.
Bosch Cooktop Error F8: Cooktop Power Limit Reached
The cooktop has reduced power to one or more zones because the combined power draw of all active zones has exceeded the cooktop's total power limit. This is a managed power-sharing condition, not a fault.
Thermador Cooktop Error F8: Cooktop Power Limit Reached
The cooktop has reduced power to one or more zones because the combined power draw of all active zones has exceeded the cooktop's total power limit. This is a managed power-sharing condition, not a fault.
Fisher & Paykel DishDrawer Error Code F8: Electrical Fault
The dishwasher has detected a general electrical fault. This code covers a range of electrical issues that cannot be identified or resolved by the user.
Gaggenau Cooktop Error F8: Cooktop Power Limit Reached
The cooktop has reduced power to one or more zones because the combined power draw of all active zones has exceeded the cooktop's total power limit. This is a managed power-sharing condition, not a fault.
Whirlpool Refrigerator Error F8E1: Freezer Evaporator Fan Motor Failure
The evaporator fan motor in the freezer compartment has failed or is not operating within expected speed parameters. This fan circulates cold air from the evaporator coil throughout the freezer and often the fresh food compartment. Without it running, temperatures will rise in both sections.
Whirlpool Washing Machine Error F8E1: Low Water Flow — Not Filling Correctly
The washer detected that water flow into the drum was lower than expected during the fill phase. This also displays as LO FL on some models. The cycle is paused until adequate water flow is confirmed.
Maytag Refrigerator Error F8E1: Freezer Evaporator Fan Motor Failure
The evaporator fan motor in the freezer compartment has failed or is not operating within expected speed parameters. This fan circulates cold air from the evaporator coil throughout the freezer and often the fresh food compartment. Without it running, temperatures will rise in both sections.
Maytag Washer Error F8E1: Washer Not Filling Fast Enough
Maytag washer error F8E1 usually means the machine is not getting enough incoming water to fill on time.
KitchenAid Refrigerator Error F8E1: Freezer Evaporator Fan Motor Failure
The evaporator fan motor in the freezer compartment has failed or is not operating within expected speed parameters. This fan circulates cold air from the evaporator coil throughout the freezer and often the fresh food compartment. Without it running, temperatures will rise in both sections.
Whirlpool Refrigerator Error F8E2: Refrigerator or Freezer Fan Failure
Whirlpool refrigerator error F8E2 usually means one of the cooling fans is not moving air properly.
Whirlpool Washing Machine Error F8E2: Dispenser System Problem
The washer cannot dispense detergent or fabric softener correctly. The dispenser motor or the mechanism that routes water through the detergent compartments has failed or is obstructed.
Maytag Refrigerator Error F8E2: Refrigerator or Freezer Fan Failure
Maytag refrigerator error F8E2 usually means one of the cooling fans is not moving air properly.
Maytag Washing Machine Error F8E2: Dispenser System Problem
The washer cannot dispense detergent or fabric softener correctly. The dispenser motor or the mechanism that routes water through the detergent compartments has failed or is obstructed.
KitchenAid Refrigerator Error F8E2: Refrigerator or Freezer Fan Failure
KitchenAid refrigerator error F8E2 usually means one of the cooling fans is not moving air properly.
Whirlpool Dishwasher Error F8E4: Water Detected in Drip Tray
The dishwasher's drip tray (base pan) sensor has detected water in the bottom of the cabinet. This indicates a slow or active internal leak. The machine has stopped to prevent further overflow.
Maytag Dishwasher Error F8E4: Water Detected in Drip Tray
The dishwasher's drip tray (base pan) sensor has detected water in the bottom of the cabinet. This indicates a slow or active internal leak. The machine has stopped to prevent further overflow.
KitchenAid Dishwasher Error F8E4: Water Detected in Drip Tray
The dishwasher's drip tray (base pan) sensor has detected water in the bottom of the cabinet. This indicates a slow or active internal leak. The machine has stopped to prevent further overflow.
Whirlpool Dishwasher Error F8E5: Water Leak — Protective Shutdown Active
The dishwasher has detected a water leak and has triggered a full protective shutdown. The machine will not operate again until the leak source is repaired. This is a critical safety code — the water supply must be turned off immediately.
Maytag Dishwasher Error F8E5: Water Leak — Protective Shutdown Active
The dishwasher has detected a water leak and has triggered a full protective shutdown. The machine will not operate again until the leak source is repaired. This is a critical safety code — the water supply must be turned off immediately.
KitchenAid Dishwasher Error F8E5: Water Leak — Protective Shutdown Active
The dishwasher has detected a water leak and has triggered a full protective shutdown. The machine will not operate again until the leak source is repaired. This is a critical safety code — the water supply must be turned off immediately.
Whirlpool Refrigerator Error F8E8: Compressor Failure
The compressor — the heart of the refrigerant circuit — has failed or is not operating within acceptable parameters. Without a functioning compressor, the refrigerant cannot circulate and the refrigerator will lose all cooling ability in both compartments. This is a major mechanical failure requiring professional service.
Maytag Refrigerator Error F8E8: Compressor Failure
The compressor — the heart of the refrigerant circuit — has failed or is not operating within acceptable parameters. Without a functioning compressor, the refrigerant cannot circulate and the refrigerator will lose all cooling ability in both compartments. This is a major mechanical failure requiring professional service.
KitchenAid Refrigerator Error F8E8: Compressor Failure
The compressor — the heart of the refrigerant circuit — has failed or is not operating within acceptable parameters. Without a functioning compressor, the refrigerant cannot circulate and the refrigerator will lose all cooling ability in both compartments. This is a major mechanical failure requiring professional service.
LG Oven Error F9: Upper Oven Not Heating — No Temperature Rise
The upper oven is not heating at all — the control board is not detecting any temperature rise from the bake element during a bake cycle. The oven is completely cold during operation.
GE Appliances Oven Error F9: Door Lock Circuit Component Failure
The oven has detected a fault in the door lock circuit. This is most commonly triggered during or after a self-clean cycle when the door lock motor or switch has failed. Also displayed as FC on some GE models.
Fisher & Paykel DishDrawer Error Code F9: Communication Fault Between Display and Control Module
The display panel and the main control module have lost communication. This is an internal electronics fault that cannot be user-resolved.
Frigidaire Oven Error F90: Door Lock Issue — Latch Motor or Switch Fault
The oven door lock mechanism has encountered a fault. F90 through F94 all relate to the door lock assembly — the motor-driven latch that engages during self-clean cycles. The specific sub-code indicates which part of the lock sequence failed: F90 = lock motor did not complete; F91 = door lock switch fault; F92/F93/F94 = lock position sensor disagreement. The oven will not allow the self-clean cycle to start, or is stuck with the door locked.
Electrolux Oven Error F90: Door Lock Issue — Latch Motor or Switch Fault
The oven door lock mechanism has encountered a fault. F90 through F94 all relate to the door lock assembly — the motor-driven latch that engages during self-clean cycles. The specific sub-code indicates which part of the lock sequence failed: F90 = lock motor did not complete; F91 = door lock switch fault; F92/F93/F94 = lock position sensor disagreement. The oven will not allow the self-clean cycle to start, or is stuck with the door locked.
Panasonic F91 air conditioner error code
Refrigerant cycle abnormality.
Panasonic F93 air conditioner error code
Compressor abnormal revolution.
Miele Oven Error F94: Float Switches Jammed in Water Container
The float switches in the water container are stuck in a position that gives the control system an incorrect water level reading. This typically occurs on Miele combination steam ovens (DGC series) when mineral deposits or debris prevent the floats from moving freely. This code applies to Miele steam ovens (DG/DGC series).
GE Appliances Oven Error F96: Internal Component Needs Replacement
The oven's self-diagnostic system has detected a failure in an internal component — typically a relay, sensor circuit, or secondary board. The specific component depends on the model; F97 and F7X are variant codes indicating related internal faults.
Whirlpool Oven Error F9E0: Miswired Outlet or Electrical Polarity Problem
Whirlpool oven error F9E0 usually means the range is not receiving the correct household power or polarity.
Maytag Oven Error F9E0: Miswired Outlet or Electrical Polarity Problem
Maytag oven error F9E0 usually means the range is not receiving the correct household power or polarity.
KitchenAid Oven Error F9E0: Miswired Outlet or Electrical Polarity Problem
KitchenAid oven error F9E0 usually means the range is not receiving the correct household power or polarity.
Whirlpool Dishwasher Error F9E1: Dishwasher Not Draining
Whirlpool dishwasher error F9E1 usually means the machine cannot drain water from the tub within the expected time.
Whirlpool Washer Error F9E1: Washer Taking Too Long to Drain
Whirlpool washer error F9E1 usually means the machine cannot drain the tub within the allowed time.
Maytag Dishwasher Error F9E1: Cannot Drain — Water Not Leaving Tub
The dishwasher is unable to drain water from the tub within the expected time. This is one of the most common dishwasher faults and is usually caused by a blockage in the drain path rather than a component failure.
Maytag Washing Machine Error F9E1: Extended Drain Time — Not Draining Fast Enough
The washer started a drain cycle but could not empty the drum within 8 minutes. The machine has stopped to prevent motor damage and flooding.
KitchenAid Dishwasher Error F9E1: Cannot Drain — Water Not Leaving Tub
The dishwasher is unable to drain water from the tub within the expected time. This is one of the most common dishwasher faults and is usually caused by a blockage in the drain path rather than a component failure.
Whirlpool Dishwasher Error F9E2: Drainage Issue — Slow or Incomplete Drain
The dishwasher is draining, but not at the expected rate or volume. Water may remain in the bottom of the tub after a cycle. This differs from F9E1 in that the drain pump is functioning but the flow is restricted.
Maytag Dishwasher Error F9E2: Drainage Issue — Slow or Incomplete Drain
The dishwasher is draining, but not at the expected rate or volume. Water may remain in the bottom of the tub after a cycle. This differs from F9E1 in that the drain pump is functioning but the flow is restricted.
KitchenAid Dishwasher Error F9E2: Drainage Issue — Slow or Incomplete Drain
The dishwasher is draining, but not at the expected rate or volume. Water may remain in the bottom of the tub after a cycle. This differs from F9E1 in that the drain pump is functioning but the flow is restricted.
Haier Washing Machine Error FA: Water Level Sensor Anomaly
The washer's water level pressure sensor has reported an abnormal reading that the control board cannot interpret as valid. The machine has stopped to prevent overfilling or incorrect cycle operation.
Whirlpool Dishwasher Error FAE5: Cycle Ended with Error — Control Fault
The dishwasher completed a cycle but ended with an error condition. The control board has detected an issue that prevented the cycle from completing normally. Also displayed as F10E5 on some models.
Maytag Dishwasher Error FAE5: Cycle Ended with Error — Control Fault
The dishwasher completed a cycle but ended with an error condition. The control board has detected an issue that prevented the cycle from completing normally. Also displayed as F10E5 on some models.
KitchenAid Dishwasher Error FAE5: Cycle Ended with Error — Control Fault
The dishwasher completed a cycle but ended with an error condition. The control board has detected an issue that prevented the cycle from completing normally. Also displayed as F10E5 on some models.
Fisher & Paykel Refrigerator Error Code Fault 1: Control Module Failed Self-Test at Startup
The main control module failed its self-test during startup. This indicates a control board fault that prevents the refrigerator from running its normal operating sequence.
Fisher & Paykel Refrigerator Error Code Fault 2: Defrost Heater Malfunction — Previous Defrosts Aborted
The automatic defrost system has failed — previous defrost cycles were aborted after 40 minutes without completing. Frost has likely accumulated on the evaporator, and the refrigerator's cooling performance will decline as the frost thickens.
Mitsubishi Electric Fb air conditioner error code
The indoor unit control system has detected a memory or control fault.
Samsung Dryer Error FC: Frequency Error — Invalid Power Supply Frequency
The dryer has detected that the power supply frequency does not match its requirements. US dryers require 60Hz — this error most commonly occurs when a dryer is used outside its intended market.
GE Appliances Oven Error FD: Probe or Probe Receptacle Needs Replacement
The meat probe or probe receptacle (the socket inside the oven where the probe plugs in) is reporting an open or shorted circuit. The oven cannot read probe temperature and has disabled probe-controlled cooking.
Frigidaire Washing Machine Error FD: Lid Lock Error
FD is a lid lock fault on top-load models, indicating the lid lock mechanism did not engage or disengage correctly within the expected time. Unlike E3 (lid open), FD often points to a mechanical or electrical failure of the lock assembly itself.
Electrolux Washing Machine Error FD: Lid Lock Error
FD is a lid lock fault on top-load models, indicating the lid lock mechanism did not engage or disengage correctly within the expected time. Unlike E3 (lid open), FD often points to a mechanical or electrical failure of the lock assembly itself.
LG Dishwasher Error FE: Overfill — Too Much Water in Tub
The dishwasher's water level sensor has detected more water in the tub than the cycle requires. The machine has stopped to prevent an overflow onto the kitchen floor.
LG Washer Error FE: Washer Overfilling
LG washer error FE usually means the machine is filling with too much water or not sensing the water level correctly.
GE Appliances Washing Machine Error FE: Critical Water Level Reached
The washer has detected that water has reached a critical overflow level inside the tub. This is a serious fault — the water inlet valve or water level sensor has malfunctioned, causing overfilling.
Miele Oven Error FE44: Cooktop Needs to Cool Down — Unsuitable Cookware Used
The cooktop's thermal protection circuit has triggered because the surface temperature exceeded safe limits. This is commonly caused by using non-induction-compatible cookware on an induction zone, or by operating a zone without a pot (ghost load). The cooktop will resume normal operation after it cools down. This code applies to Miele induction and electric cooktops.
Miele Oven Error FE47: Fan Blocked — Objects in Drawer Below or Dust Build-Up
The cooling fan that protects the cooktop's electronics has been blocked and cannot spin at the required speed. Without adequate cooling, the control electronics will overheat. The cooktop shuts down as a safety measure until airflow is restored. This code applies to Miele induction and electric cooktops.
LG Refrigerator Error FF: Freezer Fan Motor Error
LG refrigerator error FF usually means the freezer evaporator fan is not circulating cold air through the cabinet properly.
GE Refrigerator Error FF: Freezer Temperature Rising
GE refrigerator error FF usually means the freezer temperature has risen above the safe range.
Bosch Washing Machine Error Foam/Bubbles Icon: Excess Foam Detected — Detergent Dosage Too High
The washing machine has detected too much foam inside the drum, usually caused by too much or the wrong type of detergent.
LG Refrigerator Error FS: Freezer Sensor Short or Disconnection
The freezer temperature sensor (thermistor) has shorted or become disconnected. The control board cannot monitor freezer temperature and cannot regulate the cooling cycle correctly.
GE Appliances Dishwasher Error FTD: Drainage Failure During Cycle
The dishwasher detected a drainage failure at some point during the cycle. Water could not be expelled from the tub within the expected time window. Also displayed as F56 on some GE models.
LG Dryer Error GAS: Gas Supply Problem
The dryer has detected an issue with the gas supply. Either the gas is not flowing when the igniter calls for it, or the gas valve solenoids have failed. This code appears on LG gas dryers only.
LG Refrigerator Error gF: Flow Sensor Error — Low Water Pressure
The refrigerator's water flow sensor has detected insufficient water flow to the ice maker and water dispenser. The sensor is not registering adequate pressure or flow rate from the household water supply.
Most common Bosch dishwasher error codes and what they usually mean
A clearer look at the Bosch dishwasher codes owners run into most often and what is worth checking before booking service.
Most common Samsung washing machine error codes and what to check first
The Samsung washer codes people see most often, with the first checks that usually make sense before you start chasing parts.
What to check before replacing a dishwasher drain pump
The checks worth doing before you blame the drain pump and spend money on a fix that may not be the real problem.
What to check before replacing a washing machine door lock
What to rule out before ordering a new door lock, from alignment and load issues to startup problems that mimic a latch fault.
When a printer says paper jam but there isn't one
What a false paper-jam warning usually points to, from hidden scraps and tray issues to faults that are no longer simple jams.
How to identify your Canon printer family before using an error code page
How to work out the right Canon family first so the code page you open is actually talking about your printer.
Common Brother printer messages that usually mean stop and check support
The Brother messages that usually mean it is time to stop retrying and treat the fault more seriously.
Dishwasher features that actually matter
The dishwasher features that genuinely improve day-to-day use, loading, drying, and maintenance once the novelty wears off.
Washing machine features that matter more than marketing extras
Which washing-machine features are worth caring about in real life, and which ones mostly exist to pad the sales pitch.
When to repair vs replace a refrigerator with repeated fault codes
How to think through the repair-versus-replace decision when the same refrigerator warning keeps coming back.
When repeated dryer error codes usually mean it is time to stop DIY troubleshooting
When a dryer warning has moved past sensible first checks and into the territory where more DIY retries stop helping.
How to tell if a printer fault is a cartridge issue or a service issue
How to separate ordinary cartridge or toner trouble from the kind of printer fault that usually points to real service.
Most common Canon printer error codes and what they usually mean
The Canon printer warnings and support codes that come up most often, and the decisions they usually force first.
Most common Brother printer messages and what they usually mean
The Brother messages that show up most often across home and office printers, and what they usually point toward.
Before calling appliance service: the safe checks worth doing first
The simple checks that can save time, money, and a messy support call before you commit to service or parts.
How to tell if a dishwasher problem is drainage or leak-protection related
How to tell whether a dishwasher water-related warning is about drainage or a more cautious leak-protection stop.
Most common Whirlpool appliance error codes and what they usually mean
A brand-level Whirlpool guide to the code patterns owners search most often across the major appliance lines.
How to find the right printer model family before using error codes
How to match the right printer family or series before trusting an error page that might only be a near match.
Most common GE appliance error codes and what they usually mean
A GE overview for the appliance-code patterns people most often search before narrowing into the right machine type.
Printer features that actually matter for home offices
The printer features that make home-office life easier once the machine becomes part of the weekly routine.
Before ordering a printer printhead or other expensive part
The checks worth doing before you spend real money on a printhead or another printer part that may not solve the fault.
Most common LG appliance error codes and what they usually mean
An LG overview for the warnings owners search most often across washers, refrigerators, dryers, and dishwashers.
Frigidaire Refrigerator Error H: High Temperature Alarm
Frigidaire refrigerator error H usually means a refrigerator or freezer compartment has stayed too warm for too long.
Electrolux Refrigerator Error H: High Temperature Alarm
Electrolux refrigerator error H usually means a refrigerator or freezer compartment has stayed too warm for too long.
Bosch Washing Machine Error H:32: Unbalanced Load Detected
The unbalanced load detection system has activated and interrupted the spin cycle because laundry is unevenly distributed.
Bosch Dishwasher Error Code H01: Startup Timer Active (Not an Error Code)
This is not an actual error code, but an indication that the start-up timer menu has been accessed to delay the start of the cycle, with H01 for a 1-hour delay and h02 for a 2-hour delay, and so on.
Thermador Dishwasher Error Code H01: Startup Timer Active (Not an Error Code)
This is not an actual error code, but an indication that the start-up timer menu has been accessed to delay the start of the cycle, with H01 for a 1-hour delay and h02 for a 2-hour delay, and so on.
Gaggenau Dishwasher Error Code H01: Startup Timer Active (Not an Error Code)
This is not an actual error code, but an indication that the start-up timer menu has been accessed to delay the start of the cycle, with H01 for a 1-hour delay and h02 for a 2-hour delay, and so on.
Panasonic H11 air conditioner error code
Indoor / outdoor abnormal communication.
Panasonic H14 air conditioner error code
Indoor intake air temperature sensor abnormality.
Panasonic H19 air conditioner error code
Indoor fan motor mechanism lock.
Panasonic H21 air conditioner error code
Indoor float switch operation abnormality.
Whirlpool Dishwasher Error H2O: Water Supply Issue — Cycle Paused
The dishwasher has paused the current cycle because it cannot confirm adequate water supply. The display shows H2O to indicate a water-related hold. The cycle will resume once the water supply issue is resolved.
Maytag Dishwasher Error H2O: Water Supply Issue — Cycle Paused
The dishwasher has paused the current cycle because it cannot confirm adequate water supply. The display shows H2O to indicate a water-related hold. The cycle will resume once the water supply issue is resolved.
KitchenAid Dishwasher Error H2O: Water Supply Issue — Cycle Paused
The dishwasher has paused the current cycle because it cannot confirm adequate water supply. The display shows H2O to indicate a water-related hold. The cycle will resume once the water supply issue is resolved.
GE Appliances Dishwasher Error H2O: Low Water Supply Detected
The dishwasher has not received enough water during the fill phase. The cycle has paused until the water supply issue is resolved.
GE Washer Error H2O: Washer Not Getting Enough Water
GE washer error H2O usually means the machine is not getting enough incoming water to fill correctly.
Fisher & Paykel Dryer Error Code H2O full: Condensate Water Tank Full
The water collection tank on a condenser or heat pump dryer is full and must be emptied before the dryer can continue. This is routine maintenance, not a fault.
LG Oven Error H5: Surface Temperature Warning — Residual Heat
H5 is a safety indicator, not an error code. It appears on the cooktop surface display to warn that a burner zone is still hot enough to cause burns, even though the burner has been turned off. The indicator clears automatically when the surface cools below a safe temperature.
Panasonic H97 air conditioner error code
Outdoor fan motor mechanism lock.
Panasonic H99 air conditioner error code
Indoor operating unit freeze protection.
Bosch Washing Machine Error H9E: Hot Water Supply Issue or AquaStop Activated
The hot water tap is not turned on, the hot water hose is not connected correctly, or the AquaStop safety device has activated.
Samsung Dishwasher Error HC: High Temperature Heater Error — Water Temperature Too High
The dishwasher has detected that the water temperature is too high for the current cycle on rotary spray arm models. The heating element or water supply is delivering water above safe operating limits, and the cycle has been interrupted to prevent damage.
Samsung Dryer Error HC: Dryer Overheating
Samsung dryer error HC usually means the dryer is overheating and has shut heating down to prevent damage or fire risk.
Samsung Washing Machine Error HC: Heater Error — Wash Water Temperature Issue
The washer has detected a fault in the heating element circuit. The water heating system is either overheating or failing to heat, depending on the model and error variant.
Whirlpool Washing Machine Error HC: Hot and Cold Inlet Hoses Reversed
The washer has detected that hot water is entering the cold water inlet — the hot and cold supply hoses were swapped at installation. This applies to top-load HE models. The washer will not operate correctly with reversed hoses.
Maytag Washing Machine Error HC: Hot and Cold Inlet Hoses Reversed
The washer has detected that hot water is entering the cold water inlet — the hot and cold supply hoses were swapped at installation. This applies to top-load HE models. The washer will not operate correctly with reversed hoses.
Samsung Dryer Error HC2: Gas Ignition Error — Gas Dryer Only
The gas dryer has detected a failure in the gas ignition system. The burner is not lighting correctly or at all, preventing the dryer from generating heat.
Frigidaire Dishwasher Error Hd: Heat Delay While Water Warms
Frigidaire dishwasher error Hd usually means the dishwasher is pausing while the wash water heats to the expected temperature.
Electrolux Dishwasher Error Hd: Heat Delay While Water Warms
Electrolux dishwasher error Hd usually means the dishwasher is pausing while the wash water heats to the expected temperature.
Haier Refrigerator Error Hd: Defrost System Error
The refrigerator's automatic defrost system has failed. Variants Fd, Rd, Ec, and Ed indicate related defrost circuit faults on different models. Without a functioning defrost system, frost will gradually build up on the evaporator coils until airflow is completely blocked and the refrigerator stops cooling.
Samsung Dishwasher Error HE: Dishwasher Heating Error
Samsung dishwasher error HE usually means the machine is not heating the wash water correctly.
LG Dishwasher Error HE: Dishwasher Heating Error
LG dishwasher error HE usually means the machine is not heating the wash water correctly.
LG Dryer Error HS: Humidity Sensor Error
The dryer's humidity sensor has returned an abnormal reading or has stopped responding. Auto-dry cycles use this sensor to detect when clothes are dry and stop the cycle — a fault here can cause over-drying, under-drying, or a stopped cycle.
Frigidaire Dishwasher Error i20: Dishwasher Did Not Drain Properly
Frigidaire dishwasher error i20 usually means the machine did not drain water from the tub within the expected time.
Electrolux Dishwasher Error i20: Drain Issue — Dishwasher Did Not Drain Properly
The dishwasher attempted to drain but could not remove water from the tub within the expected time. Water remains in the sump or tub. The most common causes are a clogged filter, a blocked drain hose, or an incorrect drain hose installation height.
Frigidaire Dishwasher Error i40: Filter or Sump Is Clogged
Frigidaire dishwasher error i40 usually means water flow through the filter or sump area is restricted.
Electrolux Dishwasher Error i40: Clogged Filter or Sump
The dishwasher has detected restricted water flow through the sump or filter assembly. The glass trap and cylindrical filter at the bottom of the tub are blocked with food debris, grease, or mineral deposits, preventing normal wash circulation.
Miele Refrigerator Error ICE: Ice Maker Fault
The refrigerator has detected a fault with the ice maker. The ice maker has stopped producing ice and is reporting an error. This code may also appear as 01_22_F on some Miele models.
Samsung Refrigerator Error Ice Off blinking: Ice Bucket Not Seated — Ice Off Indicator Blinking
The ice maker is detecting that the ice bucket is not inserted or not seated properly. The ice maker will not produce ice while the bucket is absent or improperly seated — this protects the floor from ice spilling out.
LG Dishwasher Error IE: Dishwasher Not Filling With Water
LG dishwasher error IE usually means the machine did not get enough water within the allowed fill time.
LG Washer Error IE: Washer Not Filling With Water
LG washer error IE usually means the machine is not getting enough incoming water to complete the fill on time.
LG Refrigerator Error IF: Ice Maker Fan Problem
LG refrigerator error IF usually means the ice maker compartment fan is not running normally.
Brother Install Starter Ink
The first cartridges installed are not the starter cartridges that came with the machine.
Whirlpool Washing Machine Error Int: Cycle Paused or Cancelled
The current wash cycle was paused or cancelled — either by pressing the Pause/Cancel button, by a power interruption, or by the lid/door being opened mid-cycle on some models. This is a status indicator, not a fault.
Maytag Washing Machine Error Int: Cycle Paused or Cancelled
The current wash cycle was paused or cancelled — either by pressing the Pause/Cancel button, by a power interruption, or by the lid/door being opened mid-cycle on some models. This is a status indicator, not a fault.
Epson ET-3830 / ET-3850 / L6270 invalid IP address and subnet mask combination
The printer's IP and subnet settings do not match the network correctly.
LG Refrigerator Error IS: Ice Maker Fan or Sensor Problem
The ice maker compartment fan or its temperature sensor is not functioning correctly. The ice maker fan circulates cold air around the ice tray — without it, ice production slows or stops and ice quality deteriorates.
LG Refrigerator Error iT: Ice Maker Defect
The ice maker has reported a general internal defect. The refrigerator's diagnostics have identified a fault within the ice maker mechanism that is outside the scope of a simple sensor or fan error.
Fisher & Paykel Dryer Error Code Keyloc: Child Lock / Keylock Active
The keylock (child lock) feature is active. Controls are disabled to prevent accidental operation. This is not a fault.
Whirlpool Dryer Error L2: Low or No Line Voltage on Leg 2
Electric dryers in North America run on a 240-volt circuit made up of two 120-volt legs. L2 means the dryer is not receiving the correct voltage on the second leg (Leg 2). The dryer may run but produces no heat, or may not run at all. This is a power supply issue — either the circuit breaker has partially tripped, a fuse in the panel has blown, or there is a wiring fault in the outlet or supply cable.
Maytag Dryer Error L2: Low or No Line Voltage on Leg 2
Electric dryers in North America run on a 240-volt circuit made up of two 120-volt legs. L2 means the dryer is not receiving the correct voltage on the second leg (Leg 2). The dryer may run but produces no heat, or may not run at all. This is a power supply issue — either the circuit breaker has partially tripped, a fuse in the panel has blown, or there is a wiring fault in the outlet or supply cable.
Samsung Dishwasher Error LC: Leak Sensor Detecting Moisture
Samsung dishwasher error LC usually means the leak sensor has detected moisture in the base area.
Samsung Washing Machine Error LC: Water Level or Leakage Detected
The washer has detected an abnormal water level or moisture in the base of the machine, indicating either a leak or a water pressure sensor fault.
Whirlpool Washing Machine Error LdL: Lid Not Locking
On top-load HE washers, the lid must lock before the spin cycle can start for safety. The washer attempted to lock the lid but did not receive confirmation that the lock engaged.
Maytag Washing Machine Error LdL: Lid Not Locking
On top-load HE washers, the lid must lock before the spin cycle can start for safety. The washer attempted to lock the lid but did not receive confirmation that the lock engaged.
LG Dishwasher Error LE: Motor Error — Wash Motor Not Responding
The dishwasher's wash motor (circulation pump) has encountered a fault. The motor is not reaching the expected speed or is drawing abnormal current. The CE variant indicates the same fault on some LG model ranges.
LG Washing Machine Error LE: Motor Overloaded
The washer's drive motor has detected an overload condition and stopped to protect itself from damage. The motor is drawing more current than expected, typically because the drum is over-loaded or something is obstructing rotation.
GE Appliances Dishwasher Error LEAK: Possible Water Leak Detected
The dishwasher's leak detector has sensed moisture in the base of the appliance, indicating a water leak somewhere in the machine. The dishwasher has stopped the cycle and activated the drain pump to remove water from the base.
Fisher & Paykel Dryer Error Code LO: Ambient Temperature Too Low
The ambient temperature is too low for the dryer to operate efficiently. Heat pump dryers in particular require a minimum ambient temperature.
Whirlpool Range/Oven Error LOC: Control Lock Activated
The control lock (also called child lock or control lockout) is active. All oven and cooktop controls are disabled until the lock is deactivated. This is a safety feature, not a fault — the range is operating as designed.
Whirlpool Washing Machine Error LOC: Control Lock Active
Control Lock is enabled — all buttons on the control panel are disabled to prevent accidental cycle changes or a child from starting the washer. This is a mode indicator, not a fault.
Maytag Range/Oven Error LOC: Control Lock Activated
The control lock (also called child lock or control lockout) is active. All oven and cooktop controls are disabled until the lock is deactivated. This is a safety feature, not a fault — the range is operating as designed.
Maytag Washing Machine Error LOC: Control Lock Active
Control Lock is enabled — all buttons on the control panel are disabled to prevent accidental cycle changes or a child from starting the washer. This is a mode indicator, not a fault.
KitchenAid Range/Oven Error LOC: Control Lock Activated
The control lock (also called child lock or control lockout) is active. All oven and cooktop controls are disabled until the lock is deactivated. This is a safety feature, not a fault — the range is operating as designed.
GE Appliances Oven Error LOC: Child Lockout Active
The control lock (child lockout) feature is engaged. All control panel buttons are disabled. This is not a fault — it is an intentional safety mode to prevent accidental oven activation.
Frigidaire Oven Error LOC: Control Lock — All Controls Disabled
The full control lock feature is active on the oven/range. All oven and cooktop controls — including the keypad, temperature settings, and timer — are disabled and will not respond to any input. LOC is a user-activated child safety lock and is not a fault. The oven will not heat and the cooktop will not operate while LOC is displayed.
Electrolux Oven Error LOC: Control Lock — All Controls Disabled
The full control lock feature is active on the oven/range. All oven and cooktop controls — including the keypad, temperature settings, and timer — are disabled and will not respond to any input. LOC is a user-activated child safety lock and is not a fault. The oven will not heat and the cooktop will not operate while LOC is displayed.
Frigidaire Oven Error LOCK: Cooktop Surface Lock — Controls Disabled
The cooktop control lock is active. All surface element knobs or touch controls are disabled and will not respond to input. Some Frigidaire and Electrolux models display a dash (–) rather than the word LOCK when this feature is active. This is a user-activated safety feature, not a fault — no component has failed.
Electrolux Oven Error LOCK: Cooktop Surface Lock — Controls Disabled
The cooktop control lock is active. All surface element knobs or touch controls are disabled and will not respond to input. Some Frigidaire and Electrolux models display a dash (–) rather than the word LOCK when this feature is active. This is a user-activated safety feature, not a fault — no component has failed.
Miele Washing Machine Error LOCKED: Control Lock Active — PIN Required
The washer's control lock (child lock or technician lock) is active and requires a PIN to unlock. The machine will not respond to program selection or start commands until the correct PIN is entered.
Brother Machine Error 30 / 33 / 34 / 35
The printhead carriage is not moving home correctly or a carriage-side mechanism is out of place.
Brother Machine Error 32
Paper or labels are stuck inside the printer or drum unit.
Brother Machine Error 41
The machine detected a printhead malfunction and usually needs repair.
Brother Machine Error 46
The ink absorber box is full and needs service replacement.
Brother Manual Feed message
The printer is waiting for paper in the manual or multipurpose feed path.
Brother Media Type Mismatch / Media Mismatch
The media type in the print job does not match the paper type set on the machine.
Brother Media Type Mismatch / Media Mismatch message
The loaded paper does not match the paper settings the printer expects.
LG Dishwasher Error nE: Vario Motor Error — Spray Arm Control Fault
The vario motor that controls which spray arm zone is active (lower, middle, or upper) has stopped responding correctly. LG's Vario system directs water pressure to different rack zones; without it, wash performance degrades and the machine stops.
Brother No Ink Cartridge
An ink cartridge is not installed correctly.
Brother No Ink Cartridge or Cannot Detect
The printer cannot continue because an ink cartridge is missing or not recognized correctly.
Brother No Paper or No Paper Fed
The selected paper source is empty or the printer could not start the feed correctly.
Brother No Paper / No Paper Tray / MP Tray message
The selected paper source is empty or not installed correctly.
Fisher & Paykel Washing Machine Error Code no tAP: No Water Supply — Tap Closed or Low Pressure
The washer is not receiving water from the household supply. The display variants indicate which supply is affected: 'no tAP' means no water at all, 'no hot' means the hot supply is absent, and 'no Cld' means cold water is missing. All require checking the supply connections.
Brother No Toner
The toner cartridge or toner-and-drum assembly is not seated correctly.
Brother No Toner
A toner cartridge is missing or not installed correctly.
Brother No Toner / Toner Error message
The printer cannot continue because toner is missing, not recognized, or not installed correctly.
LG Dryer Error nP: No Power to Heater
The dryer is running but the heating element is receiving no power. Clothes will tumble but will not dry — the air is not being heated. This code indicates an electrical supply problem rather than a failed element.
Samsung Dishwasher Error OC: Over-Level Water Error — Excess Water Detected
The dishwasher has detected that the water level inside the tub is higher than expected. The water level sensor has measured an overfill condition, and the cycle has been stopped to prevent overflow and potential water damage.
Samsung Washer Error OE: Washer Overfilling or Not Sensing Water Level Correctly
Samsung washer error OE usually means the machine thinks too much water is in the drum or the water-level reading is not correct.
LG Dishwasher Error OE: Dishwasher Not Draining
LG dishwasher error OE usually means the machine cannot drain water from the tub within the expected time.
LG Washer Error OE: Washer Not Draining Water
LG washer error OE usually means the machine cannot drain water out of the drum within the expected time.
Samsung Refrigerator Error OF OF: Cooling Off Mode — Cooling System Disabled (Demo or Shop Mode)
The refrigerator's cooling system has been disabled. This is not a fault — it is a deliberate mode used in retail showrooms to display the refrigerator without running the compressor. It is commonly called Demo Mode or Shop Mode. No cooling occurs while this mode is active.
Whirlpool Washing Machine Error Ofb: Out of Balance Load
The washer detected that the laundry load is unevenly distributed in the drum during spin. An out-of-balance load causes excessive vibration that can damage the machine — the washer has paused spin to protect itself.
Maytag Washing Machine Error Ofb: Out of Balance Load
The washer detected that the laundry load is unevenly distributed in the drum during spin. An out-of-balance load causes excessive vibration that can damage the machine — the washer has paused spin to protect itself.
Whirlpool Washing Machine Error OL: Overloaded
The washer has detected that the drum is carrying more weight than it is rated for. An overloaded drum cannot agitate or spin properly, leading to poor cleaning and potential motor damage. The cycle will not proceed until items are removed.
Maytag Washing Machine Error OL: Overloaded
The washer has detected that the drum is carrying more weight than it is rated for. An overloaded drum cannot agitate or spin properly, leading to poor cleaning and potential motor damage. The cycle will not proceed until items are removed.
Fisher & Paykel Washing Machine Error Code out oF bAL: Out of Balance — Load Unevenly Distributed
The washer has detected that the load is unevenly distributed in the drum. To prevent vibration damage, the washer stops the spin cycle and displays this message. This is a user condition, not a component fault.
HP OfficeJet Pro 9010 / 9020 out of paper
The selected paper source is empty or the printer could not pick paper up correctly.
HP OfficeJet Pro 8010 / 8020 / 8030 out of paper
The selected paper source is empty or the printer could not pick paper up correctly.
Haier Refrigerator Error P0: Door Open or Door Switch Issue
The refrigerator has detected that a door is open, or the door switch/sensor is not registering a fully closed door. Variants P1 through P4 indicate the same condition on different doors or compartments depending on the model.
P0100 Code Meaning and Next Steps
P0100 usually means the mass airflow sensor circuit is not behaving correctly.
P0101 Code Meaning and Next Steps
P0101 usually means the mass airflow signal is outside the expected range or performance window.
P0102 Code Meaning and Next Steps
P0102 usually means the mass airflow signal is reading too low.
P0103 Code Meaning and Next Steps
P0103 usually means the mass airflow signal is reading too high.
P0104 Code Meaning and Next Steps
P0104 usually means the mass airflow signal is intermittent or erratic.
P0105 Code Meaning and Next Steps
P0105 usually means the MAP sensor circuit has a malfunction.
P0106 Code Meaning and Next Steps
P0106 usually means the MAP signal is outside the expected range or performance window.
P0107 Code Meaning and Next Steps
P0107 usually means the MAP signal is reading too low.
P0108 Code Meaning and Next Steps
P0108 usually means the MAP signal is reading too high.
P0109 Code Meaning and Next Steps
P0109 usually means the MAP signal is intermittent or erratic.
P0111 Code Meaning and Next Steps
P0111 usually means the intake air temperature signal is out of the expected range.
P0112 Code Meaning and Next Steps
P0112 usually means the intake air temperature signal is reading too low.
P0113 Code Meaning and Next Steps
P0113 usually means the intake air temperature signal is reading too high.
P0114 Code Meaning and Next Steps
P0114 usually means the intake air temperature signal is intermittent or erratic.
P0115 Code Meaning and Next Steps
P0115 usually means the engine coolant temperature circuit has a malfunction.
P0116 Code Meaning and Next Steps
P0116 usually means the engine coolant temperature signal is out of the expected range or performance window.
P0117 Code Meaning and Next Steps
P0117 usually means the engine coolant temperature signal is reading too low.
P0118 Code Meaning and Next Steps
P0118 usually means the engine coolant temperature signal is reading too high.
P0119 Code Meaning and Next Steps
P0119 usually means the engine coolant temperature signal is intermittent.
P0120 Code Meaning and Next Steps
P0120 usually means the throttle position sensor circuit is not behaving correctly.
P0121 Code Meaning and Next Steps
P0121 usually means the throttle-position signal is out of range or not matching what the ECU expects.
P0122 Code Meaning and Next Steps
P0122 usually means the throttle position sensor is reading too low.
P0123 Code Meaning and Next Steps
P0123 usually means the throttle-position signal is reading too high.
P0124 Code Meaning and Next Steps
P0124 usually means the throttle-position signal is intermittent.
P0125 Code Meaning and Next Steps
P0125 usually means the engine has not warmed enough for closed-loop operation.
P0126 Code Meaning and Next Steps
P0126 usually means the engine is not staying warm enough for stable operation.
P0128 Code Meaning and Next Steps
P0128 usually means the engine is not reaching the temperature the ECU expects in time.
P0130 Code Meaning and Next Steps
P0130 usually means the bank 1 sensor 1 oxygen sensor circuit is not behaving correctly.
P0131 Code Meaning and Next Steps
P0131 usually means the bank 1 sensor 1 oxygen sensor is reading too low.
P0132 Code Meaning and Next Steps
P0132 usually means the bank 1 sensor 1 oxygen sensor is reading too high.
P0133 Code Meaning and Next Steps
P0133 usually means the bank 1 sensor 1 oxygen sensor is responding too slowly.
P0134 Code Meaning and Next Steps
P0134 usually means the bank 1 sensor 1 oxygen sensor is not showing activity.
P0135 Code Meaning and Next Steps
P0135 usually means the bank 1 sensor 1 oxygen sensor heater circuit is not behaving correctly.
P0136 Code Meaning and Next Steps
P0136 usually means the bank 1 sensor 2 oxygen sensor circuit is not behaving correctly.
P0137 Code Meaning and Next Steps
P0137 usually means the bank 1 sensor 2 oxygen sensor is reading too low.
P0138 Code Meaning and Next Steps
P0138 usually means the bank 1 sensor 2 oxygen sensor is reading too high.
P0139 Code Meaning and Next Steps
P0139 usually means the bank 1 sensor 2 oxygen sensor is responding too slowly.
P0140 Code Meaning and Next Steps
P0140 usually means the bank 1 sensor 2 oxygen sensor is not showing activity.
P0141 Code Meaning and Next Steps
P0141 means the bank 1 downstream oxygen sensor heater circuit is not working properly.
P0142 Code Meaning and Next Steps
P0142 usually means the bank 1 sensor 3 oxygen sensor circuit is not behaving correctly.
P0143 Code Meaning and Next Steps
P0143 usually means the bank 1 sensor 3 oxygen sensor is reading too low.
P0144 Code Meaning and Next Steps
P0144 usually means the bank 1 sensor 3 oxygen sensor is reading too high.
P0145 Code Meaning and Next Steps
P0145 usually means the bank 1 sensor 3 oxygen sensor is responding too slowly.
P0146 Code Meaning and Next Steps
P0146 usually means the bank 1 sensor 4 oxygen sensor circuit is not behaving correctly.
P0147 Code Meaning and Next Steps
P0147 usually means the bank 1 sensor 3 oxygen sensor heater circuit is not behaving correctly.
P0150 Code Meaning and Next Steps
P0150 usually means the bank 2 sensor 1 oxygen sensor circuit is not behaving correctly.
P0151 Code Meaning and Next Steps
P0151 usually means the bank 2 sensor 1 oxygen sensor is reading too low.
P0152 Code Meaning and Next Steps
P0152 usually means the bank 2 sensor 1 oxygen sensor is reading too high.
P0153 Code Meaning and Next Steps
P0153 usually means the bank 2 sensor 1 oxygen sensor is responding too slowly.
P0154 Code Meaning and Next Steps
P0154 usually means the bank 2 sensor 1 oxygen sensor is not showing activity.
P0155 Code Meaning and Next Steps
P0155 usually means the bank 2 sensor 1 oxygen sensor heater circuit is not behaving correctly.
P0156 Code Meaning and Next Steps
P0156 usually means the bank 2 sensor 2 oxygen sensor circuit is not behaving correctly.
P0157 Code Meaning and Next Steps
P0157 usually means the bank 2 sensor 2 oxygen sensor is reading too low.
P0158 Code Meaning and Next Steps
P0158 usually means the bank 2 sensor 2 oxygen sensor is reading too high.
P0159 Code Meaning and Next Steps
P0159 usually means the bank 2 sensor 2 oxygen sensor is responding too slowly.
P0160 Code Meaning and Next Steps
P0160 usually means the bank 2 sensor 2 oxygen sensor is not showing activity.
P0161 Code Meaning and Next Steps
P0161 usually means the bank 2 sensor 2 oxygen sensor heater circuit is not behaving correctly.
P0162 Code Meaning and Next Steps
P0162 usually means the bank 2 sensor 3 oxygen sensor circuit is not behaving correctly.
P0163 Code Meaning and Next Steps
P0163 usually means the bank 2 sensor 3 oxygen sensor is reading too low.
P0164 Code Meaning and Next Steps
P0164 usually means the bank 2 sensor 3 oxygen sensor is reading too high.
P0165 Code Meaning and Next Steps
P0165 usually means the bank 2 sensor 3 oxygen sensor is responding too slowly.
P0166 Code Meaning and Next Steps
P0166 usually means the bank 2 sensor 3 oxygen sensor is not showing activity.
P0167 Code Meaning and Next Steps
P0167 usually means the bank 2 sensor 3 oxygen sensor heater circuit is not behaving correctly.
P0170 Code Meaning and Next Steps
P0170 usually means bank 1 fuel trim is outside the normal correction range.
P0171 Code Meaning and Next Steps
P0171 usually means bank 1 is running too lean.
P0172 Code Meaning and Next Steps
P0172 usually means bank 1 is running too rich.
P0173 Code Meaning and Next Steps
P0173 usually means the fuel trim on bank 2 is out of range.
P0174 Code Meaning and Next Steps
P0174 usually means bank 2 is running too lean.
P0176 Code Meaning and Next Steps
P0176 usually means the fuel composition sensor circuit is not working properly.
P0177 Code Meaning and Next Steps
P0177 usually means the fuel composition sensor signal is out of range or performance.
P0178 Code Meaning and Next Steps
P0178 usually means the fuel composition sensor signal is reading too low.
P0179 Code Meaning and Next Steps
P0179 usually means the fuel composition sensor signal is reading too high.
P0180 Code Meaning and Next Steps
P0180 usually means the fuel temperature sensor circuit has a malfunction.
P0181 Code Meaning and Next Steps
P0181 usually means the fuel temperature sensor is out of range or performance.
P0182 Code Meaning and Next Steps
P0182 usually means the fuel temperature sensor is reading too low.
P0183 Code Meaning and Next Steps
P0183 usually means the fuel temperature sensor is reading too high.
P0184 Code Meaning and Next Steps
P0184 usually means the fuel temperature sensor is intermittent or erratic.
P0185 Code Meaning and Next Steps
P0185 usually means the fuel temperature sensor B circuit is not behaving correctly.
P0186 Code Meaning and Next Steps
P0186 usually means the fuel temperature sensor B is out of normal range or its performance looks wrong.
P0187 Code Meaning and Next Steps
P0187 usually means the fuel temperature sensor B signal is reading too low.
P0188 Code Meaning and Next Steps
P0188 usually means the fuel temperature sensor B signal is reading too high.
P0189 Code Meaning and Next Steps
P0189 usually means the fuel temperature sensor is intermittent or its signal is dropping out.
P0190 Code Meaning and Next Steps
P0190 means the fuel rail pressure sensor circuit is not behaving normally.
P0191 Code Meaning and Next Steps
P0191 means the fuel rail pressure reading is outside the expected range or not responding properly.
P0192 Code Meaning and Next Steps
P0192 means the fuel rail pressure sensor signal is reading too low.
P0193 Code Meaning and Next Steps
P0193 means the fuel rail pressure sensor signal is reading too high.
P0194 Code Meaning and Next Steps
P0194 means the fuel rail pressure sensor signal is intermittent or unstable.
P0195 Code Meaning and Next Steps
P0195 means the engine oil temperature sensor circuit is not working properly.
P0196 Code Meaning and Next Steps
P0196 means the engine oil temperature sensor is reading outside the expected range.
P0197 Code Meaning and Next Steps
P0197 means the engine oil temperature sensor is reading too low.
P0198 Code Meaning and Next Steps
P0198 means the engine oil temperature sensor is reading too high.
P0199 Code Meaning and Next Steps
P0199 means the engine oil temperature sensor signal is intermittent or unstable.
P0200 Code Meaning and Next Steps
P0200 usually means the injector circuit has a general malfunction.
P0201 Code Meaning and Next Steps
P0201 usually means the injector circuit has a malfunction on cylinder 1.
P0202 Code Meaning and Next Steps
P0202 usually means the injector circuit has a malfunction on cylinder 2.
P0203 Code Meaning and Next Steps
P0203 usually means the injector circuit has a malfunction on cylinder 3.
P0204 Code Meaning and Next Steps
P0204 usually means the injector circuit has a malfunction on cylinder 4.
P0205 Code Meaning and Next Steps
P0205 usually means the injector circuit has a malfunction on cylinder 5.
P0206 Code Meaning and Next Steps
P0206 usually means the injector circuit has a malfunction on cylinder 6.
P0207 Code Meaning and Next Steps
P0207 usually means the injector circuit has a malfunction on cylinder 7.
P0208 Code Meaning and Next Steps
P0208 usually means the injector circuit has a malfunction on cylinder 8.
P0209 Code Meaning and Next Steps
P0209 usually means the injector circuit has a malfunction on cylinder 9.
P0210 Code Meaning and Next Steps
P0210 usually means injector circuit malfunction for cylinder 10.
P0211 Code Meaning and Next Steps
P0211 usually means injector circuit malfunction for cylinder 11.
P0212 Code Meaning and Next Steps
P0212 usually means injector circuit malfunction for cylinder 12.
P0213 Code Meaning and Next Steps
P0213 usually means injector circuit malfunction for cylinder 13.
P0214 Code Meaning and Next Steps
P0214 usually means injector circuit malfunction for cylinder 14.
P0215 Code Meaning and Next Steps
P0215 usually means the engine shutoff solenoid or injector shutoff circuit is malfunctioning.
P0216 Code Meaning and Next Steps
P0216 usually means injector timing control malfunction or injection timing fault.
P0217 Code Meaning and Next Steps
P0217 usually means engine overheating condition.
P0218 Code Meaning and Next Steps
P0218 usually means transmission over temperature condition.
P0219 Code Meaning and Next Steps
P0219 usually means engine overspeed condition.
P0220 Code Meaning and Next Steps
P0220 usually means throttle position sensor B has a circuit malfunction.
P0221 Code Meaning and Next Steps
P0221 usually means throttle position sensor B is out of range or performing poorly.
P0222 Code Meaning and Next Steps
P0222 usually means throttle position sensor B is reading too low.
P0223 Code Meaning and Next Steps
P0223 usually means throttle position sensor B is reading too high.
P0224 Code Meaning and Next Steps
P0224 usually means throttle position sensor B is intermittent or erratic.
P0225 Code Meaning and Next Steps
P0225 usually means throttle position sensor C has a circuit malfunction.
P0226 Code Meaning and Next Steps
P0226 usually means throttle position sensor C is out of range or performing poorly.
P0227 Code Meaning and Next Steps
P0227 usually means throttle position sensor C is reading too low.
P0228 Code Meaning and Next Steps
P0228 usually means throttle position sensor C is reading too high.
P0229 Code Meaning and Next Steps
P0229 usually means throttle position sensor C is intermittent or erratic.
P0230 Code Meaning and Next Steps
P0230 usually means the fuel pump primary circuit has a malfunction.
P0231 Code Meaning and Next Steps
P0231 usually means the fuel pump secondary circuit is reading too low.
P0232 Code Meaning and Next Steps
P0232 usually means the fuel pump secondary circuit is reading too high.
P0233 Code Meaning and Next Steps
P0233 usually means the fuel pump secondary circuit is intermittent.
P0234 Code Meaning and Next Steps
P0234 usually means the turbo or supercharger is producing too much boost.
P0235 Code Meaning and Next Steps
P0235 usually means boost sensor A has a circuit malfunction.
P0236 Code Meaning and Next Steps
P0236 usually means boost sensor A is out of range or performing poorly.
P0237 Code Meaning and Next Steps
P0237 usually means boost sensor A is reading too low.
P0238 Code Meaning and Next Steps
P0238 usually means boost sensor A is reading too high.
P0239 Code Meaning and Next Steps
P0239 usually means boost sensor B is out of range or performing poorly.
P0240 Code Meaning and Next Steps
P0240 means the boost control system is not behaving as expected.
P0241 Code Meaning and Next Steps
P0241 means the boost control signal is reading too low.
P0242 Code Meaning and Next Steps
P0242 means the boost control signal is reading too high.
P0243 Code Meaning and Next Steps
P0243 means the boost control solenoid circuit has a fault.
P0244 Code Meaning and Next Steps
P0244 means the boost control solenoid is not performing within the expected range.
P0245 Code Meaning and Next Steps
P0245 means the boost control solenoid circuit is reading too low.
P0246 Code Meaning and Next Steps
P0246 means the boost control solenoid circuit is reading too high.
P0247 Code Meaning and Next Steps
P0247 means the boost control solenoid signal is intermittent or unstable.
P0248 Code Meaning and Next Steps
P0248 means the secondary boost control path has a fault.
P0249 Code Meaning and Next Steps
P0249 means the secondary boost control path is out of range or not responding properly.
P0250 Code Meaning and Next Steps
P0250 means the secondary boost control circuit is reading too low.
P0251 Code Meaning and Next Steps
P0251 means the secondary boost control circuit is reading too high.
P0252 Code Meaning and Next Steps
P0252 means the fuel metering control circuit is not responding properly.
P0253 Code Meaning and Next Steps
P0253 means the fuel metering control circuit is reading too low.
P0254 Code Meaning and Next Steps
P0254 means the fuel metering control circuit is reading too high.
P0255 Code Meaning and Next Steps
P0255 means the fuel metering control signal is intermittent or unstable.
P0256 Code Meaning and Next Steps
P0256 means the secondary fuel metering control circuit is not behaving as expected.
P0257 Code Meaning and Next Steps
P0257 means the secondary fuel metering control signal is reading too low.
P0258 Code Meaning and Next Steps
P0258 means the secondary fuel metering control signal is reading too high.
P0259 Code Meaning and Next Steps
P0259 means the secondary fuel metering control signal is intermittent or unstable.
P0260 Code Meaning and Next Steps
P0260 usually means injector circuit malfunction for cylinder 2.
P0261 Code Meaning and Next Steps
P0261 usually means injector circuit malfunction for cylinder 1.
P0262 Code Meaning and Next Steps
P0262 usually means injector circuit malfunction for cylinder 3.
P0263 Code Meaning and Next Steps
P0263 usually means cylinder 1 contribution or balance is lower than expected.
P0264 Code Meaning and Next Steps
P0264 usually means injector circuit malfunction for cylinder 2.
P0265 Code Meaning and Next Steps
P0265 usually means cylinder 1 contribution or balance is lower than expected.
P0266 Code Meaning and Next Steps
P0266 usually means cylinder 2 contribution or balance is lower than expected.
P0267 Code Meaning and Next Steps
P0267 usually means cylinder 3 contribution or balance is lower than expected.
P0268 Code Meaning and Next Steps
P0268 usually means cylinder 4 contribution or balance is lower than expected.
P0269 Code Meaning and Next Steps
P0269 usually means cylinder 3 contribution or balance is lower than expected.
P0270 Code Meaning and Next Steps
P0270 usually means cylinder 4 contribution or balance is lower than expected.
P0271 Code Meaning and Next Steps
P0271 usually means cylinder 5 contribution or balance is lower than expected.
P0272 Code Meaning and Next Steps
P0272 usually means cylinder 6 contribution or balance is lower than expected.
P0273 Code Meaning and Next Steps
P0273 usually means cylinder 7 contribution or balance is lower than expected.
P0274 Code Meaning and Next Steps
P0274 usually means cylinder 8 contribution or balance is lower than expected.
P0275 Code Meaning and Next Steps
P0275 usually means cylinder 5 contribution or balance is lower than expected.
P0276 Code Meaning and Next Steps
P0276 usually means cylinder 6 contribution or balance is lower than expected.
P0277 Code Meaning and Next Steps
P0277 usually means cylinder 7 contribution or balance is lower than expected.
P0278 Code Meaning and Next Steps
P0278 usually means cylinder 8 contribution or balance is lower than expected.
P0279 Code Meaning and Next Steps
P0279 usually means cylinder 6 contribution or balance is lower than expected.
P0280 Code Meaning and Next Steps
P0280 usually means cylinder 7 contribution or balance is lower than expected.
P0281 Code Meaning and Next Steps
P0281 usually means cylinder 8 contribution or balance is lower than expected.
P0282 Code Meaning and Next Steps
P0282 usually means cylinder 4 contribution or balance is lower than expected.
P0283 Code Meaning and Next Steps
P0283 usually means cylinder 5 contribution or balance is lower than expected.
P0284 Code Meaning and Next Steps
P0284 usually means cylinder 8 contribution or balance is lower than expected.
P0285 Code Meaning and Next Steps
P0285 usually means cylinder 9 contribution or balance is lower than expected.
P0286 Code Meaning and Next Steps
P0286 usually means cylinder 10 contribution or balance is lower than expected.
P0287 Code Meaning and Next Steps
P0287 usually means cylinder 11 contribution or balance is lower than expected.
P0288 Code Meaning and Next Steps
P0288 usually means cylinder 12 contribution or balance is lower than expected.
P0289 Code Meaning and Next Steps
P0289 usually means cylinder 13 injector circuit high.
P0290 Code Meaning and Next Steps
P0290 usually means cylinder 10 contribution or balance is low on many systems.
P0291 Code Meaning and Next Steps
P0291 usually means cylinder 11 contribution or balance is low on many systems.
P0292 Code Meaning and Next Steps
P0292 usually means cylinder 12 contribution or balance is low on many systems.
P0293 Code Meaning and Next Steps
P0293 usually means cylinder 11 contribution or balance is low on many systems.
P0294 Code Meaning and Next Steps
P0294 usually means cylinder 12 contribution or balance is low on many systems.
P0295 Code Meaning and Next Steps
P0295 usually means cylinder 13 contribution or balance is low on many systems.
P0296 Code Meaning and Next Steps
P0296 usually means cylinder 14 contribution or balance is low on many systems.
P0300 Code Meaning and Next Steps
P0300 usually means the engine is detecting random or multiple-cylinder misfires.
P0301 Code Meaning and Next Steps
P0301 means cylinder 1 is misfiring.
P0302 Code Meaning and Next Steps
P0302 means cylinder 2 is misfiring.
P0303 Code Meaning and Next Steps
P0303 means cylinder 3 is misfiring.
P0304 Code Meaning and Next Steps
P0304 usually means cylinder 4 is misfiring.
P0305 Code Meaning and Next Steps
P0305 usually means cylinder 5 is misfiring.
P0306 Code Meaning and Next Steps
P0306 usually means cylinder 6 is misfiring.
P0307 Code Meaning and Next Steps
P0307 usually means cylinder 7 is misfiring.
P0308 Code Meaning and Next Steps
P0308 usually means cylinder 8 is misfiring.
P0309 Code Meaning and Next Steps
P0309 means cylinder 9 is misfiring.
P0311 Code Meaning and Next Steps
P0311 means cylinder 11 is misfiring.
P0312 Code Meaning and Next Steps
P0312 means cylinder 12 is misfiring.
P0320 Code Meaning and Next Steps
P0320 usually means the ignition or engine-speed input circuit is not behaving correctly.
P0321 Code Meaning and Next Steps
P0321 usually means the engine-speed input signal is out of normal range or performance.
P0322 Code Meaning and Next Steps
P0322 usually means the engine-speed input signal is missing.
P0323 Code Meaning and Next Steps
P0323 usually means the engine-speed input signal is intermittent.
P0325 Code Meaning and Next Steps
P0325 means the knock sensor circuit on bank 1 is not working properly.
P0326 Code Meaning and Next Steps
P0326 usually means knock sensor 1 is reporting an out-of-range or performance problem.
P0327 Code Meaning and Next Steps
P0327 usually means knock sensor 1 is reading too low.
P0328 Code Meaning and Next Steps
P0328 usually means knock sensor 1 is reading too high.
P0329 Code Meaning and Next Steps
P0329 usually means knock sensor 1 is responding intermittently.
P0330 Code Meaning and Next Steps
P0330 usually means knock sensor 2 is reporting an out-of-range or performance problem.
P0331 Code Meaning and Next Steps
P0331 usually means knock sensor 2 is reading too low.
P0332 Code Meaning and Next Steps
P0332 usually means knock sensor 2 is reading too high.
P0333 Code Meaning and Next Steps
P0333 usually means knock sensor 2 is responding intermittently.
P0334 Code Meaning and Next Steps
P0334 usually means knock sensor 2 is behaving intermittently or dropping out.
P0335 Code Meaning and Next Steps
P0335 usually means the crankshaft position sensor A circuit is not behaving correctly.
P0336 Code Meaning and Next Steps
P0336 usually means the crankshaft position sensor A signal is out of normal range or performance.
P0337 Code Meaning and Next Steps
P0337 usually means the crankshaft position sensor A signal is reading too low.
P0338 Code Meaning and Next Steps
P0338 usually means the crankshaft position sensor A signal is reading too high.
P0339 Code Meaning and Next Steps
P0339 usually means the crankshaft position sensor A signal is intermittent.
P0340 Code Meaning and Next Steps
P0340 usually means the bank 1 camshaft position sensor circuit is not behaving correctly.
P0341 Code Meaning and Next Steps
P0341 usually means the bank 1 camshaft signal is outside the expected range or performance window.
P0342 Code Meaning and Next Steps
P0342 usually means the bank 1 camshaft signal is reading too low.
P0343 Code Meaning and Next Steps
P0343 usually means the bank 1 camshaft signal is reading too high.
P0344 Code Meaning and Next Steps
P0344 usually means the bank 1 camshaft signal is intermittent or erratic.
P0350 Code Meaning and Next Steps
P0350 usually means ignition coil 0 circuit malfunction.
P0351 Code Meaning and Next Steps
P0351 usually means the ignition coil A circuit is not behaving as expected.
P0352 Code Meaning and Next Steps
P0352 usually means the ignition coil B circuit is not behaving as expected.
P0353 Code Meaning and Next Steps
P0353 usually means the ignition coil C circuit is not behaving as expected.
P0354 Code Meaning and Next Steps
P0354 usually means the ignition coil D circuit is not behaving as expected.
P0355 Code Meaning and Next Steps
P0355 usually means ignition coil 5 circuit malfunction.
P0356 Code Meaning and Next Steps
P0356 usually means ignition coil 6 circuit malfunction.
P0357 Code Meaning and Next Steps
P0357 usually means ignition coil 7 circuit malfunction.
P0358 Code Meaning and Next Steps
P0358 usually means ignition coil 8 circuit malfunction.
P0359 Code Meaning and Next Steps
P0359 usually means ignition coil 9 circuit malfunction.
P0360 Code Meaning and Next Steps
P0360 usually means ignition coil J circuit malfunction.
P0361 Code Meaning and Next Steps
P0361 usually means ignition coil 1 circuit malfunction.
P0362 Code Meaning and Next Steps
P0362 usually means ignition coil 2 circuit malfunction.
P0370 Code Meaning and Next Steps
P0370 usually means the high-resolution timing reference signal A is not behaving correctly.
P0371 Code Meaning and Next Steps
P0371 usually means the high-resolution timing reference signal A has too many pulses.
P0372 Code Meaning and Next Steps
P0372 usually means the high-resolution timing reference signal A has too few pulses.
P0373 Code Meaning and Next Steps
P0373 usually means the high-resolution timing reference signal A is intermittent or erratic.
P0374 Code Meaning and Next Steps
P0374 usually means the high-resolution timing reference signal A has no pulses.
P0375 Code Meaning and Next Steps
P0375 usually means the high-resolution timing reference signal B is not behaving correctly.
P0376 Code Meaning and Next Steps
P0376 means the engine timing reference high-resolution signal has too many pulses.
P0377 Code Meaning and Next Steps
P0377 means the engine timing reference high-resolution signal has too few pulses.
P0378 Code Meaning and Next Steps
P0378 means the engine timing reference high-resolution signal is intermittent or erratic.
P0379 Code Meaning and Next Steps
P0379 means the engine timing reference high-resolution signal has no pulses.
P0380 Code Meaning and Next Steps
P0380 usually means the diesel glow-plug or heater circuit A is not behaving correctly.
P0381 Code Meaning and Next Steps
P0381 means the glow plug or heater indicator circuit is malfunctioning.
P0382 Code Meaning and Next Steps
P0382 means the glow plug or heater circuit is reading low or weak.
P0385 Code Meaning and Next Steps
P0385 means the crankshaft position sensor B circuit has a malfunction.
P0386 Code Meaning and Next Steps
P0386 means the crankshaft position sensor B signal is out of range or not believable.
P0387 Code Meaning and Next Steps
P0387 means the crankshaft position sensor B signal is too low or missing.
P0388 Code Meaning and Next Steps
P0388 means the crankshaft position sensor B signal is too high.
P0389 Code Meaning and Next Steps
P0389 means the crankshaft position sensor B signal is intermittent.
P0400 Code Meaning and Next Steps
P0400 usually means the EGR system is not flowing exhaust gas the way it should.
P0401 Code Meaning and Next Steps
P0401 usually means the EGR system is not flowing enough exhaust gas when the ECU expects it to.
P0402 Code Meaning and Next Steps
P0402 means the engine computer is seeing more EGR flow than expected.
P0403 Code Meaning and Next Steps
P0403 usually means the EGR control circuit has a malfunction.
P0404 Code Meaning and Next Steps
P0404 usually means the EGR system is out of range or performing poorly.
P0405 Code Meaning and Next Steps
P0405 usually means the EGR position sensor is reading too low.
P0406 Code Meaning and Next Steps
P0406 usually means the EGR position sensor is reading too high.
P0407 Code Meaning and Next Steps
P0407 usually means the EGR sensor B circuit is reading too low.
P0408 Code Meaning and Next Steps
P0408 usually means the EGR sensor B circuit is reading too high.
P0410 Code Meaning and Next Steps
P0410 usually means the secondary air injection system is not working properly.
P0411 Code Meaning and Next Steps
P0411 usually means the secondary air injection flow is incorrect.
P0412 Code Meaning and Next Steps
P0412 usually means the secondary air injection control circuit has a malfunction.
P0413 Code Meaning and Next Steps
P0413 usually means the secondary air injection valve circuit is malfunctioning.
P0414 Code Meaning and Next Steps
P0414 usually means the secondary air injection switch valve A is shorted or malfunctioning.
P0415 Code Meaning and Next Steps
P0415 usually means the secondary air injection switch valve B has a circuit malfunction.
P0416 Code Meaning and Next Steps
P0416 usually means the secondary air system switch valve B is malfunctioning.
P0417 Code Meaning and Next Steps
P0417 usually means the secondary air system switch valve B circuit is shorted.
P0418 Code Meaning and Next Steps
P0418 usually means the secondary air pump relay A circuit has a malfunction.
P0419 Code Meaning and Next Steps
P0419 usually means the secondary air pump relay B circuit has a malfunction.
P0420 Code Meaning and Next Steps
P0420 usually means the catalytic converter efficiency is below the threshold the ECU expects.
P0421 Code Meaning and Next Steps
P0421 usually means the warm-up catalyst on bank 1 is not reaching efficiency quickly enough.
P0422 Code Meaning and Next Steps
P0422 usually means the main catalyst on bank 1 is not efficient enough.
P0423 Code Meaning and Next Steps
P0423 usually means the heated catalyst on bank 1 is not working efficiently.
P0424 Code Meaning and Next Steps
P0424 means the warm-up catalyst on bank 1 is not reaching expected performance.
P0430 Code Meaning and Next Steps
P0430 means the catalytic converter on bank 2 is not meeting efficiency expectations.
P0431 Code Meaning and Next Steps
P0431 means the warm-up catalyst on bank 2 is not reaching expected performance.
P0432 Code Meaning and Next Steps
P0432 means the main catalyst on bank 1 is not reaching expected efficiency.
P0433 Code Meaning and Next Steps
P0433 means the warm-up catalyst on bank 2 is not reaching expected efficiency.
P0434 Code Meaning and Next Steps
P0434 means the warm-up catalyst on bank 1 is not reaching expected efficiency.
P0440 Code Meaning and Next Steps
P0440 usually means the EVAP system has a general malfunction.
P0441 Code Meaning and Next Steps
P0441 usually means the EVAP purge flow is not what the ECU expected.
P0442 Code Meaning and Next Steps
P0442 usually means the EVAP system has detected a small leak.
P0443 Code Meaning and Next Steps
P0443 usually means the EVAP purge control circuit is not behaving correctly.
P0444 Code Meaning and Next Steps
P0444 usually means the EVAP purge valve circuit is open.
P0445 Code Meaning and Next Steps
P0445 means the EVAP purge control valve circuit is shorted or behaving unusually.
P0446 Code Meaning and Next Steps
P0446 usually means the EVAP vent control system is not behaving correctly.
P0447 Code Meaning and Next Steps
P0447 means the EVAP vent control circuit is open or not responding properly.
P0448 Code Meaning and Next Steps
P0448 means the EVAP vent control circuit is shorted or behaving unusually.
P0449 Code Meaning and Next Steps
P0449 usually means the EVAP vent control circuit is not behaving correctly.
P0450 Code Meaning and Next Steps
P0450 means the fuel tank pressure sensor circuit is not working properly.
P0451 Code Meaning and Next Steps
P0451 means the fuel tank pressure sensor is reading outside the expected range.
P0452 Code Meaning and Next Steps
P0452 usually means the EVAP pressure sensor is reading too low.
P0453 Code Meaning and Next Steps
P0453 usually means the EVAP pressure sensor is reading too high.
P0454 Code Meaning and Next Steps
P0454 usually means the EVAP pressure sensor signal is intermittent.
P0455 Code Meaning and Next Steps
P0455 usually means the EVAP system has detected a large leak.
P0460 Code Meaning and Next Steps
P0460 means the fuel level sensor circuit is not working properly.
P0461 Code Meaning and Next Steps
P0461 means the fuel level sensor is reading outside the expected range.
P0462 Code Meaning and Next Steps
P0462 means the fuel level sensor is reading too low.
P0463 Code Meaning and Next Steps
P0463 means the fuel level sensor is reading too high.
P0464 Code Meaning and Next Steps
P0464 means the fuel level sensor signal is intermittent or unstable.
P0465 Code Meaning and Next Steps
P0465 means the purge flow sensor circuit is not working properly.
P0466 Code Meaning and Next Steps
P0466 means the purge flow sensor is reading outside the expected range.
P0467 Code Meaning and Next Steps
P0467 means the purge flow sensor is reading too low.
P0468 Code Meaning and Next Steps
P0468 means the purge flow sensor is reading too high.
P0469 Code Meaning and Next Steps
P0469 means the purge flow sensor signal is intermittent or unstable.
P0470 Code Meaning and Next Steps
P0470 usually means the exhaust pressure sensor circuit has a malfunction.
P0471 Code Meaning and Next Steps
P0471 usually means the exhaust pressure sensor reading is out of range or not performing correctly.
P0472 Code Meaning and Next Steps
P0472 usually means the exhaust pressure sensor is reading too low.
P0473 Code Meaning and Next Steps
P0473 usually means the exhaust pressure sensor is reading too high.
P0474 Code Meaning and Next Steps
P0474 usually means the exhaust pressure sensor is intermittent.
P0475 Code Meaning and Next Steps
P0475 usually means the exhaust pressure control valve has a malfunction.
P0476 Code Meaning and Next Steps
P0476 usually means the exhaust pressure control valve is out of range or not performing correctly.
P0477 Code Meaning and Next Steps
P0477 usually means the exhaust pressure control valve signal is reading too low.
P0478 Code Meaning and Next Steps
P0478 usually means the exhaust pressure control valve signal is reading too high.
P0479 Code Meaning and Next Steps
P0479 usually means the exhaust pressure control valve is intermittent.
P0480 Code Meaning and Next Steps
P0480 usually means the main cooling fan control circuit has a malfunction.
P0481 Code Meaning and Next Steps
P0481 usually means cooling fan 2 has a control circuit malfunction.
P0482 Code Meaning and Next Steps
P0482 usually means cooling fan 3 has a control circuit malfunction.
P0483 Code Meaning and Next Steps
P0483 usually means the cooling fan rationality check has failed.
P0484 Code Meaning and Next Steps
P0484 usually means the cooling fan has an over-speed or excessive-speed fault.
P0485 Code Meaning and Next Steps
P0485 usually means the cooling fan power or ground circuit has a malfunction.
P0500 Code Meaning and Next Steps
P0500 usually means the vehicle speed sensor circuit has a malfunction.
P0501 Code Meaning and Next Steps
P0501 usually means the vehicle speed sensor is out of range or not performing properly.
P0502 Code Meaning and Next Steps
P0502 usually means the vehicle speed sensor is reading too low.
P0503 Code Meaning and Next Steps
P0503 usually means the vehicle speed sensor signal is intermittent or erratic.
P0505 Code Meaning and Next Steps
P0505 usually means the idle control system is not holding normal idle speed.
P0506 Code Meaning and Next Steps
P0506 usually means the idle speed is lower than the ECU expects.
P0507 Code Meaning and Next Steps
P0507 usually means the idle speed is higher than the ECU expects.
P0510 Code Meaning and Next Steps
P0510 usually means the closed-throttle position switch or signal is not behaving correctly.
P0520 Code Meaning and Next Steps
P0520 usually means the engine oil pressure sensor or switch circuit is not behaving correctly.
P0521 Code Meaning and Next Steps
P0521 usually means the engine oil pressure reading is out of normal range or performance.
P0522 Code Meaning and Next Steps
P0522 usually means the engine oil pressure sensor circuit is reading too low.
P0523 Code Meaning and Next Steps
P0523 usually means the engine oil pressure sensor circuit is reading too high.
P0530 Code Meaning and Next Steps
P0530 usually means the A/C refrigerant pressure sensor circuit is not behaving correctly.
P0531 Code Meaning and Next Steps
P0531 usually means the A/C refrigerant pressure reading is out of normal range or performance.
P0532 Code Meaning and Next Steps
P0532 usually means the A/C refrigerant pressure sensor is reading too low.
P0533 Code Meaning and Next Steps
P0533 usually means the A/C refrigerant pressure sensor is reading too high.
P0534 Code Meaning and Next Steps
P0534 usually means the A/C refrigerant charge has been lost or the pressure signal is invalid after a loss of charge.
P0550 Code Meaning and Next Steps
P0550 usually means the power steering pressure sensor or switch circuit is not behaving correctly.
P0551 Code Meaning and Next Steps
P0551 usually means the power steering pressure signal is out of normal range or performance.
P0552 Code Meaning and Next Steps
P0552 usually means the power steering pressure signal is reading too low.
P0553 Code Meaning and Next Steps
P0553 usually means the power steering pressure signal is reading too high.
P0554 Code Meaning and Next Steps
P0554 usually means the power steering pressure signal is intermittent.
P0560 Code Meaning and Next Steps
P0560 usually means the system voltage is not behaving normally.
P0561 Code Meaning and Next Steps
P0561 usually means the system voltage is unstable or outside the normal range.
P0562 Code Meaning and Next Steps
P0562 usually means system voltage is too low.
P0563 Code Meaning and Next Steps
P0563 usually means system voltage is too high.
P0565 Code Meaning and Next Steps
P0565 usually means cruise control on signal malfunction.
P0566 Code Meaning and Next Steps
P0566 usually means cruise control off signal malfunction.
P0567 Code Meaning and Next Steps
P0567 usually means cruise control resume signal malfunction.
P0568 Code Meaning and Next Steps
P0568 usually means cruise control set signal malfunction.
P0569 Code Meaning and Next Steps
P0569 usually means cruise control coast signal malfunction.
P0570 Code Meaning and Next Steps
P0570 usually means cruise control accelerate signal malfunction.
P0571 Code Meaning and Next Steps
P0571 usually means brake switch A circuit malfunction.
P0572 Code Meaning and Next Steps
P0572 usually means brake switch A circuit is reading too low.
P0573 Code Meaning and Next Steps
P0573 usually means brake switch A circuit is reading too high.
P0574 Code Meaning and Next Steps
P0574 usually means cruise control system vehicle speed too high.
P0575 Code Meaning and Next Steps
P0575 usually means cruise control input circuit malfunction.
P0576 Code Meaning and Next Steps
P0576 usually means cruise control input circuit is reading too low.
P0578 Code Meaning and Next Steps
P0578 usually means cruise control input circuit is reading too high.
P0579 Code Meaning and Next Steps
P0579 usually means cruise control multi-function input A circuit malfunction.
P0580 Code Meaning and Next Steps
P0580 usually means cruise control multi-function input A circuit is reading too low.
P0600 Code Meaning and Next Steps
P0600 usually means there is a serial communication link malfunction.
P0601 Code Meaning and Next Steps
P0601 usually means the internal control module memory checksum is incorrect.
P0602 Code Meaning and Next Steps
P0602 usually means the control module has been programmed incorrectly.
P0603 Code Meaning and Next Steps
P0603 usually means the control module keep-alive memory has failed.
P0604 Code Meaning and Next Steps
P0604 usually means the internal control module random access memory has failed.
P0605 Code Meaning and Next Steps
P0605 usually means the internal control module read-only memory has failed.
P0606 Code Meaning and Next Steps
P0606 usually means the powertrain control module has a processor fault.
P0608 Code Meaning and Next Steps
P0608 usually means the vehicle speed output circuit has a malfunction.
P0609 Code Meaning and Next Steps
P0609 usually means the control module VSS output circuit has a malfunction.
P0620 Code Meaning and Next Steps
P0620 usually means the generator or alternator control circuit has a malfunction.
P0621 Code Meaning and Next Steps
P0621 usually means the generator lamp control circuit has a malfunction.
P0622 Code Meaning and Next Steps
P0622 usually means the generator field control circuit has a malfunction.
P0650 Code Meaning and Next Steps
P0650 usually means the malfunction indicator lamp control circuit has a malfunction.
P0654 Code Meaning and Next Steps
P0654 usually means the engine speed output circuit has a malfunction.
P0655 Code Meaning and Next Steps
P0655 usually means the engine hot lamp output circuit has a malfunction.
P0656 Code Meaning and Next Steps
P0656 usually means the fuel level output circuit has a malfunction.
P0700 Code Meaning and Next Steps
P0700 usually means the transmission control system has a fault stored in the transmission module.
P0701 Code Meaning and Next Steps
P0701 means the transmission control system has detected a range or performance problem.
P0702 Code Meaning and Next Steps
P0702 means the transmission control system has an electrical fault.
P0703 Code Meaning and Next Steps
P0703 means the torque converter brake switch circuit is not behaving normally.
P0704 Code Meaning and Next Steps
P0704 means the clutch switch circuit is not behaving as expected.
P0705 Code Meaning and Next Steps
P0705 usually means the transmission range sensor circuit is not behaving correctly.
P0706 Code Meaning and Next Steps
P0706 means the transmission range sensor is reading outside the expected range.
P0707 Code Meaning and Next Steps
P0707 means the transmission range sensor is reading too low.
P0708 Code Meaning and Next Steps
P0708 means the transmission range sensor is reading too high.
P0709 Code Meaning and Next Steps
P0709 means the transmission range sensor signal is intermittent or unstable.
P0710 Code Meaning and Next Steps
P0710 means the transmission fluid temperature sensor circuit is not working properly.
P0711 Code Meaning and Next Steps
P0711 means the transmission fluid temperature sensor is reading outside the expected range.
P0712 Code Meaning and Next Steps
P0712 means the transmission fluid temperature sensor is reading too low.
P0713 Code Meaning and Next Steps
P0713 means the transmission fluid temperature sensor is reading too high.
P0714 Code Meaning and Next Steps
P0714 means the transmission fluid temperature sensor signal is intermittent or unstable.
P0715 Code Meaning and Next Steps
P0715 usually means the input or turbine speed sensor circuit is not behaving correctly.
P0716 Code Meaning and Next Steps
P0716 means the input shaft speed sensor is reading outside the expected range.
P0717 Code Meaning and Next Steps
P0717 means the input shaft speed sensor signal is reading too low or not present.
P0718 Code Meaning and Next Steps
P0718 means the input shaft speed sensor signal is reading too high.
P0719 Code Meaning and Next Steps
P0719 means the brake switch to transmission control input is reading too low.
P0720 Code Meaning and Next Steps
P0720 usually means the output speed sensor circuit is not behaving correctly.
P0721 Code Meaning and Next Steps
P0721 means the output shaft speed sensor range or performance is not believable.
P0722 Code Meaning and Next Steps
P0722 usually means the output speed sensor has no signal.
P0723 Code Meaning and Next Steps
P0723 means the output shaft speed sensor signal is intermittent.
P0724 Code Meaning and Next Steps
P0724 means the brake switch signal to the transmission control system is stuck high or out of range.
P0725 Code Meaning and Next Steps
P0725 means the engine speed input circuit to the transmission control system has a fault.
P0726 Code Meaning and Next Steps
P0726 means the engine speed input signal is not believable for the operating conditions.
P0727 Code Meaning and Next Steps
P0727 means the engine speed input signal is missing.
P0728 Code Meaning and Next Steps
P0728 means the engine speed input signal is intermittent.
P0730 Code Meaning and Next Steps
P0730 usually means the transmission has detected an incorrect gear ratio.
P0731 Code Meaning and Next Steps
P0731 usually means gear 1 incorrect ratio.
P0732 Code Meaning and Next Steps
P0732 usually means gear 2 incorrect ratio.
P0733 Code Meaning and Next Steps
P0733 usually means gear 3 incorrect ratio.
P0734 Code Meaning and Next Steps
P0734 usually means gear 4 incorrect ratio.
P0735 Code Meaning and Next Steps
P0735 usually means gear 5 incorrect ratio.
P0736 Code Meaning and Next Steps
P0736 usually means reverse incorrect ratio.
P0740 Code Meaning and Next Steps
P0740 usually means the torque converter clutch circuit is not behaving correctly.
P0741 Code Meaning and Next Steps
P0741 usually means torque converter clutch circuit performance or stuck off.
P0742 Code Meaning and Next Steps
P0742 usually means torque converter clutch circuit stuck on.
P0743 Code Meaning and Next Steps
P0743 usually means torque converter clutch electrical problem.
P0744 Code Meaning and Next Steps
P0744 usually means torque converter clutch intermittent electrical problem.
P0745 Code Meaning and Next Steps
P0745 usually means pressure control solenoid A malfunction.
P0746 Code Meaning and Next Steps
P0746 usually means pressure control solenoid A performance or stuck off.
P0747 Code Meaning and Next Steps
P0747 usually means pressure control solenoid A stuck on.
P0748 Code Meaning and Next Steps
P0748 usually means pressure control solenoid A electrical problem.
P0749 Code Meaning and Next Steps
P0749 usually means pressure control solenoid A intermittent electrical problem.
P0750 Code Meaning and Next Steps
P0750 usually means shift solenoid A is not behaving correctly.
P0751 Code Meaning and Next Steps
P0751 usually means shift solenoid A performance or stuck off.
P0752 Code Meaning and Next Steps
P0752 usually means shift solenoid A stuck on.
P0754 Code Meaning and Next Steps
P0754 usually means shift solenoid A intermittent electrical problem.
P0755 Code Meaning and Next Steps
P0755 usually means shift solenoid B malfunction.
P0756 Code Meaning and Next Steps
P0756 usually means shift solenoid B performance or stuck off.
P0757 Code Meaning and Next Steps
P0757 usually means shift solenoid B stuck on.
P0758 Code Meaning and Next Steps
P0758 usually means shift solenoid B electrical problem.
P0759 Code Meaning and Next Steps
P0759 usually means shift solenoid B intermittent.
P0760 Code Meaning and Next Steps
P0760 usually means shift solenoid C is not behaving correctly.
P0761 Code Meaning and Next Steps
P0761 usually means shift Solenoid C Performance or Stuck Off.
P0762 Code Meaning and Next Steps
P0762 usually means shift Solenoid C Stuck On.
P0763 Code Meaning and Next Steps
P0763 usually means shift Solenoid C Electrical.
P0764 Code Meaning and Next Steps
P0764 usually means shift Solenoid C Intermittent.
P0765 Code Meaning and Next Steps
P0765 usually means shift Solenoid D Malfunction.
P0766 Code Meaning and Next Steps
P0766 usually means shift Solenoid D Performance or Stuck Off.
P0767 Code Meaning and Next Steps
P0767 usually means shift Solenoid D Stuck On.
P0768 Code Meaning and Next Steps
P0768 usually means shift Solenoid D Electrical.
P0769 Code Meaning and Next Steps
P0769 usually means shift Solenoid D Intermittent.
P0770 Code Meaning and Next Steps
P0770 usually means shift Solenoid E Malfunction.
P0771 Code Meaning and Next Steps
P0771 usually means shift Solenoid E Performance or Stuck Off.
P0772 Code Meaning and Next Steps
P0772 usually means shift Solenoid E Stuck On.
P0773 Code Meaning and Next Steps
P0773 usually means shift Solenoid E Electrical.
P0774 Code Meaning and Next Steps
P0774 usually means shift Solenoid E Intermittent.
P0780 Code Meaning and Next Steps
P0780 usually means the transmission has detected a shift malfunction.
P0781 Code Meaning and Next Steps
P0781 usually means 1-2 shift malfunction.
P0782 Code Meaning and Next Steps
P0782 usually means 2-3 shift malfunction.
P0783 Code Meaning and Next Steps
P0783 usually means 3-4 shift malfunction.
P0784 Code Meaning and Next Steps
P0784 usually means 4-5 shift malfunction.
P0785 Code Meaning and Next Steps
P0785 usually means shift/timing solenoid malfunction.
P0786 Code Meaning and Next Steps
P0786 usually means shift/timing solenoid range or performance.
P0787 Code Meaning and Next Steps
P0787 usually means shift/timing solenoid low.
P0788 Code Meaning and Next Steps
P0788 usually means shift/timing solenoid high.
P0789 Code Meaning and Next Steps
P0789 usually means shift/timing solenoid intermittent.
P0790 Code Meaning and Next Steps
P0790 usually means normal/Performance Switch Circuit malfunction.
P0801 Code Meaning and Next Steps
P0801 usually means reverse inhibit control circuit malfunction.
P0803 Code Meaning and Next Steps
P0803 usually means 1-4 upshift (skip shift) solenoid control circuit malfunction.
Mitsubishi Electric P1 air conditioner error code
The indoor unit intake sensor is reporting an error.
Mitsubishi Electric P4 air conditioner error code
The drain sensor is reporting a fault.
Mitsubishi Electric P5 air conditioner error code
The condensate drain pump has a fault.
Mitsubishi Electric P6 air conditioner error code
The unit has entered freezing or overheating safeguard operation.
Mitsubishi Electric P8 air conditioner error code
The pipe temperature sensing circuit is reporting an error.
Brother Paper is Jammed in the 2-sided Tray
Paper is jammed in the duplex path.
Brother paper is jammed in the 2-sided tray
A duplex paper jam was detected in the 2-sided path.
Brother Paper is Jammed inside the Machine
Paper is jammed in the internal print path.
Brother Paper is Jammed inside the Machine
Paper is trapped somewhere in the paper path.
HP OfficeJet Pro 9010 / 9020 paper jam
The printer detected paper stuck in the feed, duplex, or output path.
HP OfficeJet Pro 8010 / 8020 / 8030 paper jam
The printer detected paper stuck in the feed, duplex, or output path.
Lexmark C4342 / XC4342 paper jam in door A
A sheet jammed in the fuser or duplex area behind door A.
Lexmark XC4342 paper jam in the automatic document feeder
Originals jammed in the document feeder during scanning or copying.
Lexmark paper jam in the automatic document feeder
The original document jammed in the ADF path.
Lexmark paper jam in the duplex unit
Paper is jammed in the duplex path.
Lexmark C4342 / XC4342 paper jam in the multipurpose feeder
Paper jammed while feeding from the multipurpose feeder.
Lexmark C4342 / XC4342 paper jam in the standard bin
A sheet jammed as it tried to exit into the standard output bin.
Lexmark C4342 / XC4342 paper jam in trays
A tray-fed sheet jammed before it cleared the main paper path.
Lexmark paper jam in trays
Paper is jammed in the tray feed path.
HP OfficeJet Pro 9010 / 9020 paper mismatch
The loaded paper does not match the job or tray settings the printer expects.
HP OfficeJet Pro 8010 / 8020 / 8030 paper mismatch
The loaded paper does not match the job or tray settings the printer expects.
Epson WF-C5710 / WF-C5790 paper out in XX
The selected paper source is empty or the printer could not start the feed correctly.
Epson ET-5800 / ET-5850 / ET-5880 paper out in XX
The selected paper source is empty or the printer could not start the feed correctly.
Epson ET-3830 / ET-3850 / L6270 paper out in XX
The specified cassette or paper source is empty.
Epson ET-4950 paper out in XX
The indicated cassette or paper source is empty.
Epson WF-C5710 / WF-C5790 paper setup auto display is set to Off
Paper auto-detection is disabled and some printer features may not be available.
Epson ET-5800 / ET-5850 / ET-5880 paper setup auto display is set to Off
Paper auto-detection is disabled and some printer features may not be available.
Epson ET-4950 paper setup auto display is set to Off
Paper auto-detection is disabled and some printer features may not be available.
Brother paper tray not detected
The printer cannot confirm that the selected paper tray is installed correctly.
Bosch Washing Machine Error Pause/Play Icon: Energy Saving Mode Active — Display Sleeping
The washing machine display has gone dark because energy saving mode has been activated. This is not a fault.
Mitsubishi Electric PB air conditioner error code
The indoor fan motor has a fault.
Samsung Dishwasher Error PC: Zone Wash Error — Zone Wash Function Malfunctioning
The Zone Wash function — which allows targeted intensive washing of one zone of the dishwasher — has detected a malfunction. The Zone Wash valve or the spray system for the selected zone is not operating correctly.
Samsung Refrigerator Error PC ER: Panel Communication Error — Panel Communication Breakdown
The refrigerator has detected a communication breakdown between its internal panels or control boards. The display panel and the main control board can no longer communicate reliably.
Samsung Dishwasher Error PE: Half Load Function Error — Half Load Mode Not Operating
The Half Load function — which restricts washing to only the upper or lower rack to save water and energy on smaller loads — is not operating correctly. The valve or spray system controlling the inactive rack zone is malfunctioning.
LG Washing Machine Error PE: Water Level Sensor Malfunction
The washer's water level pressure sensor has returned an abnormal reading or has stopped responding. The machine cannot accurately determine how much water is in the drum and has stopped the cycle.
LG Dishwasher Error PF: Power Failure — Cycle Interrupted
The dishwasher experienced a power interruption mid-cycle. PF is an informational alert — the machine is telling you that the last cycle did not complete due to a power cut.
LG Dryer Error PF: Power Failure During Cycle
The dryer detected a power interruption during an active cycle. This is an informational status code — it tells you the cycle did not complete normally due to lost power. The dryer has paused and is waiting for your input.
LG Oven Error PF: Power Failure — Cycle Interrupted
The oven experienced a power interruption mid-cycle. PF is an informational alert letting you know the last cooking cycle did not complete due to a power cut. The clock will also need to be reset.
LG Washing Machine Error PF: Power Failure During Cycle
The washer detected a power interruption during an active cycle. This is an informational code — it tells you the cycle did not complete normally due to lost power. The machine has paused and is waiting for your input.
Whirlpool Dryer Error PF: Power Failure
The dryer detected a power interruption during a cycle. PF is an informational display — it tells you the cycle did not complete because power was lost. The dryer is now operational and waiting for you to restart or resume the cycle.
Whirlpool Range/Oven Error PF: Power Failure — Clock Reset Required
The range has detected that power was interrupted — either from an outage, a tripped breaker, or the range being accidentally unplugged. PF is displayed to alert the user to reset the clock. This is an informational indicator, not a fault.
Whirlpool Washing Machine Error PF: Power Failure
The washer detected a power interruption during a cycle. The display is showing PF to inform you that the cycle did not complete normally. This is an informational code, not a fault.
Maytag Dryer Error PF: Power Failure
The dryer detected a power interruption during a cycle. PF is an informational display — it tells you the cycle did not complete because power was lost. The dryer is now operational and waiting for you to restart or resume the cycle.
Maytag Range/Oven Error PF: Power Failure — Clock Reset Required
The range has detected that power was interrupted — either from an outage, a tripped breaker, or the range being accidentally unplugged. PF is displayed to alert the user to reset the clock. This is an informational indicator, not a fault.
Maytag Washing Machine Error PF: Power Failure
The washer detected a power interruption during a cycle. The display is showing PF to inform you that the cycle did not complete normally. This is an informational code, not a fault.
KitchenAid Range/Oven Error PF: Power Failure — Clock Reset Required
The range has detected that power was interrupted — either from an outage, a tripped breaker, or the range being accidentally unplugged. PF is displayed to alert the user to reset the clock. This is an informational indicator, not a fault.
GE Appliances Dishwasher Error PF: Power Disruption
Power to the dishwasher was interrupted during a cycle. The PF code is informational — it alerts you that the cycle did not complete and prompts you to restart.
GE Appliances Refrigerator Error PF: Power Interrupted
Power to the refrigerator was interrupted. PF is an informational alert — it confirms the refrigerator experienced a power loss and has resumed normal operation. No component has failed.
Frigidaire Dishwasher Error PF: Power Failure — Cycle Interrupted
The dishwasher lost electrical power during a cycle — either from a household power outage, a tripped breaker, or the machine being unplugged. PF is not a fault with the dishwasher; it is a notification that the previous cycle did not complete normally.
Frigidaire Refrigerator Error PF: Power Failure — Cooling Interrupted
The refrigerator experienced a power interruption — either a household outage, a tripped breaker, or the unit being unplugged. PF is not a fault with the refrigerator; it is a notification that power was lost. The refrigerator will resume normal cooling automatically once power is restored. Check food temperatures if the outage lasted more than 4 hours.
Electrolux Dishwasher Error PF: Power Failure — Cycle Interrupted
The dishwasher lost electrical power during a cycle — either from a household power outage, a tripped breaker, or the machine being unplugged. PF is not a fault with the dishwasher; it is a notification that the previous cycle did not complete normally.
Electrolux Refrigerator Error PF: Power Failure — Cooling Interrupted
The refrigerator experienced a power interruption — either a household outage, a tripped breaker, or the unit being unplugged. PF is not a fault with the refrigerator; it is a notification that power was lost. The refrigerator will resume normal cooling automatically once power is restored. Check food temperatures if the outage lasted more than 4 hours.
Whirlpool Refrigerator Error PO: Power Outage Indicator
The refrigerator is displaying PO to indicate that a power outage occurred while it was unattended. The display is alerting the owner to check food safety — the temperature may have risen during the outage. This is an informational indicator, not a mechanical fault.
Maytag Refrigerator Error PO: Power Outage Indicator
The refrigerator is displaying PO to indicate that a power outage occurred while it was unattended. The display is alerting the owner to check food safety — the temperature may have risen during the outage. This is an informational indicator, not a mechanical fault.
KitchenAid Refrigerator Error PO: Power Outage Indicator
The refrigerator is displaying PO to indicate that a power outage occurred while it was unattended. The display is alerting the owner to check food safety — the temperature may have risen during the outage. This is an informational indicator, not a mechanical fault.
Epson ET-3830 / ET-3850 / L6270 printer error
A printer error occurred and the device should be restarted first.
Epson ET-4950 printer error
A general printer fault occurred and Epson directs users to restart first.
Epson WF-C5710 / WF-C5790 printer error turn the power off and on again
The printer detected a general hardware or controller problem and wants a restart.
Epson ET-5800 / ET-5850 / ET-5880 printer error turn the power off and on again
The printer detected a general hardware or controller problem and wants a restart.
HP OfficeJet Pro 9010 / 9020 printhead error
The printer detected a printhead or ink-system problem that stops normal printing.
HP OfficeJet Pro 8010 / 8020 / 8030 printhead error
The printer detected a printhead or ink-system problem that stops normal printing.
GE Appliances Dishwasher Error PrS: Pressure Sensor Invalid Signal
The dishwasher's water pressure sensor is transmitting a signal outside its valid operating range. The control board cannot accurately determine the water level or pressure and has paused the cycle.
LG Dryer Error PS: Power Supply Voltage Problem
The dryer has detected that the incoming power supply voltage is outside its acceptable operating range. The voltage is either too high, too low, or fluctuating in a way that could damage the electronics or heating system.
Epson ET-3830 / ET-3850 / L6270 recovery mode
A firmware update failed and the printer needs to be updated again by USB.
Epson WF-C5710 / WF-C5790 recovery mode update firmware
A firmware update failed and the printer needs to be updated again.
Epson ET-5800 / ET-5850 / ET-5880 recovery mode update firmware
A firmware update failed and the printer needs to be updated again.
Epson ET-4950 recovery mode update firmware
A firmware update failed and the printer needs to be updated again by USB.
Brother Replace Drum / Drum End Soon
The drum unit is near end of life, or the drum counter was not reset after replacement.
Brother Replace the Toner Cartridge
The installed toner has reached its stop threshold and must be replaced.
Brother Replace the Waste Toner Box
The waste-toner container has reached end of life and must be replaced.
Lexmark C4342 / XC4342 replace waste toner bottle or color imaging kit
The printer needs a replaceable maintenance supply changed before continuing normally.
Brother Retry Updating by USB
A firmware update failed and the printer wants the update retried by USB.
LG Refrigerator Error rF: Refrigerator Fan Motor Error
LG refrigerator error rF usually means the refrigerator-section fan is not moving air correctly.
Whirlpool Washing Machine Error rL: Items in Drum During Clean Washer Cycle
The washer detected laundry or items in the drum when the Clean Washer (tub clean) cycle was selected. The cycle requires an empty drum to clean the tub effectively and will not proceed until items are removed.
Maytag Washing Machine Error rL: Items in Drum During Clean Washer Cycle
The washer detected laundry or items in the drum when the Clean Washer (tub clean) cycle was selected. The cycle requires an empty drum to clean the tub effectively and will not proceed until items are removed.
LG Refrigerator Error rS: Refrigerator Sensor Short or Disconnection
The fresh food compartment temperature sensor (thermistor) has shorted or become disconnected. The control board cannot accurately monitor refrigerator temperature and may not cool the section correctly.
Whirlpool Range/Oven Error SAB: Sabbath Mode Active
The oven is in Sabbath mode, a special operating mode that allows the oven to remain on at a constant temperature without the display changing, without beeping, and without the light activating when the door opens. All other controls and functions are disabled while Sabbath mode is active. This is an intentional feature, not a fault.
Maytag Range/Oven Error SAB: Sabbath Mode Active
The oven is in Sabbath mode, a special operating mode that allows the oven to remain on at a constant temperature without the display changing, without beeping, and without the light activating when the door opens. All other controls and functions are disabled while Sabbath mode is active. This is an intentional feature, not a fault.
KitchenAid Range/Oven Error SAB: Sabbath Mode Active
The oven is in Sabbath mode, a special operating mode that allows the oven to remain on at a constant temperature without the display changing, without beeping, and without the light activating when the door opens. All other controls and functions are disabled while Sabbath mode is active. This is an intentional feature, not a fault.
Frigidaire Refrigerator Error SB: Sabbath Mode Active
The refrigerator is in Sabbath Mode (Shabbos Mode). This mode disables the interior lights, display, and automatic door alarms for religious observance. The compressor and cooling system continue to operate normally — food stays at the correct temperature. SB SB displayed on both the freezer and refrigerator zones confirms Sabbath Mode is active on the full unit.
Electrolux Refrigerator Error SB: Sabbath Mode Active
The refrigerator is in Sabbath Mode (Shabbos Mode). This mode disables the interior lights, display, and automatic door alarms for religious observance. The compressor and cooling system continue to operate normally — food stays at the correct temperature. SB SB displayed on both the freezer and refrigerator zones confirms Sabbath Mode is active on the full unit.
Samsung Washing Machine Error SDC: Detergent Drawer Not Closed
The washer has detected that the detergent drawer is not fully closed and latched. The cycle will not proceed until the drawer is properly seated.
Brother Size Error DX or Size Error 2-sided
The paper loaded for duplex printing does not match the printer's expected size or duplex setting.
Whirlpool Washing Machine Error Sud: Excessive Suds Detected
The washer has detected an abnormal amount of suds in the drum. Excess suds prevent proper rinsing and can overflow into the pump and motor. The machine will pause and run extra rinse cycles to clear the foam before continuing.
Maytag Washing Machine Error Sud: Excessive Suds Detected
The washer has detected an abnormal amount of suds in the drum. Excess suds prevent proper rinsing and can overflow into the pump and motor. The machine will pause and run extra rinse cycles to clear the foam before continuing.
Samsung Washing Machine Error SUd: Excessive Suds Detected
The washer has detected an over-sudsing condition — there are too many suds in the drum. The cycle will pause and the machine will automatically run additional rinse cycles to dissipate the foam.
LG Washing Machine Error SUD: Excessive Suds Detected
The washer has detected too many suds in the drum. The cycle will pause and the machine will automatically run additional rinse passes to break down the foam before continuing.
Fisher & Paykel Washing Machine Error Code Sud LOC: Excessive Suds Detected
The washer has detected too many suds (foam) in the drum. Excess suds prevent the drum from rinsing effectively and can cause the washer to extend the cycle or stop. This is almost always caused by using too much detergent or the wrong type.
Samsung Dryer Error tC: Temperature Sensor Error
The dryer has detected a fault in its temperature measurement system. One or more temperature sensors are reporting values outside expected parameters, preventing safe heat regulation.
LG Washing Machine Error tCL: Tub Clean Reminder
The washer is reminding you to run a Tub Clean cycle to remove detergent residue, mold, and mildew buildup from inside the drum. This is a maintenance reminder, not a fault — the washer will continue to operate normally.
Samsung Dishwasher Error tE: Temperature Sensor Error — Inaccurate Temperature Detection
The dishwasher's temperature sensor (thermistor) is returning readings that are outside the expected range for normal operation. The dishwasher cannot accurately control the water heating cycle and has stopped to prevent operating at an unknown temperature.
Samsung Washing Machine Error tE: Temperature Sensor Error
The washer has detected a fault in the water temperature sensor (NTC thermistor). The machine cannot accurately measure water temperature and has stopped to prevent overheating or incorrect cycle temperatures.
LG Dishwasher Error tE: Thermistor Error — Temperature Sensor Fault
The dishwasher cannot read a valid temperature from the thermistor (temperature sensor). Without accurate temperature data, the machine cannot control the heating cycle and has stopped.
LG Washer Error TE: Heating or Thermistor Fault
LG washer error TE usually means the machine is seeing a wash-water heating or thermistor problem.
LG Dryer Error tE1: Thermistor Error — Temperature Sensor Fault
The dryer has detected a fault in one of its thermistors (temperature sensors). tE1 typically indicates the exhaust thermistor, tE2 the inlet thermistor, and tE3 a secondary thermistor — all three variants indicate the same class of problem at different sensor locations. The dryer has stopped to prevent overheating.
Brother Toner Error
One or more toner cartridges are installed incorrectly.
Brother Toner Low / Prepare New Toner Cartridge
The toner cartridge is nearing end of life but printing can usually continue for now.
Brother Toner Low or Prepare New Toner Cartridge
The installed toner is low and should be replaced soon.
Fisher & Paykel Washing Machine Error Code too FUL: Overloaded — Too Much Laundry
The washer detects that the drum is overloaded. An overloaded washer cannot tumble or agitate the laundry effectively, resulting in poor wash results and stress on the motor and suspension.
Daikin U0 air conditioner error code
The system sees closed stop valves.
Fisher & Paykel DishDrawer Error Code U1: Long Fill Time — Check Water Supply
The dishwasher took longer than expected to fill with water. U codes indicate user-fixable issues. U1 is a milder version of A1 — check the water supply connections.
Fisher & Paykel DishDrawer Error Code U2: Loading Error — Item Too Tall for Drawer
An item in the DishDrawer extends above the maximum height limit, preventing the lid from closing and sealing correctly. This is a loading error, not a fault with the dishwasher.
Daikin U2 air conditioner error code
The power supply is out of range or has a phase problem.
Daikin U4/UF air conditioner error code
The indoor and outdoor sections are not wired together correctly.
Bosch Cooktop Error U400: Supply Voltage Too Low
The cooktop has detected that the household supply voltage is below the minimum required for safe operation. The cooktop will not heat until adequate voltage is restored.
Thermador Cooktop Error U400: Supply Voltage Too Low
The cooktop has detected that the household supply voltage is below the minimum required for safe operation. The cooktop will not heat until adequate voltage is restored.
Gaggenau Cooktop Error U400: Supply Voltage Too Low
The cooktop has detected that the household supply voltage is below the minimum required for safe operation. The cooktop will not heat until adequate voltage is restored.
Daikin UA air conditioner error code
The indoor and outdoor units are incompatible.
Samsung Washing Machine Error UE: Unbalanced Load — Cannot Spin Safely
The washer has detected that the laundry load is unevenly distributed in the drum and cannot safely reach spin speed. The machine will attempt to redistribute the load automatically before displaying UE.
LG Washing Machine Error UE: Unbalanced Load — Cannot Spin Safely
The washer has detected that the laundry load is unevenly distributed in the drum and cannot safely reach spin speed. The machine will attempt to redistribute the load automatically before displaying UE or Ub.
GE Appliances Washing Machine Error UE: Load Imbalance
The washer has detected an uneven load distribution that prevents the drum from spinning at safe speed. The cycle has paused to protect the machine from excessive vibration.
Haier Washing Machine Error UNB: Unbalanced Load Detected
The washer detected that the laundry load is unevenly distributed in the drum. The machine has paused the spin cycle to protect the drum and bearings from damage caused by excessive vibration.
Epson ET-2850 warning W-01
A paper jam occurred and the jam path needs to be cleared.
Epson ET-2980 warning W-01
Paper is jammed in the product and the jam path needs to be cleared.
Epson ET-4700 / L5190 warning W-01
Paper is jammed in the printer.
Epson ET-2850 warning W-11
The ink pad is nearing the end of its service life.
Epson ET-2980 warning W-11
The ink pad is nearing the end of its service life.
Epson ET-4700 / L5190 warning W-11
The ink pad is nearing the end of its service life.
Brother Wrong Ink Color
An ink cartridge is installed in the wrong color position.
Brother Wrong Toner Cartridge
The installed toner cartridge color or supply number does not match what the printer expects.
Browse by topic
If you already know which part of the site you want, jump straight into the matching section and narrow down from there.
Section
Appliance Error Codes
The appliance section covers major home-appliance brands with conservative error-code guidance, clear next checks, and short paths to the exact warning page.
Open guide
Section
Air Conditioner Error Codes
Air-conditioner fault-code guides built around supported ranges, official error lists, and conservative first checks before service escalation.
Open guide
Section
OBD Diagnostic Codes
Vehicle diagnostics guides for generic OBD-II codes, practical first checks, and manufacturer-aware views where they add real value.
Open guide
Section
Printer Error Codes
Printer-support guides with family-scoped error-code coverage across common consumer and office brands.
Open guide
Search tips
- Use exact codes like E24, P0420, 5B00, or 31.46 when you know the display.
- Try brand and family terms together, such as Canon TS4000, Bosch dishwasher, or HP PageWide.
- Use plain-language symptoms like drain, catalyst, paper jam, scanner, or electronics.
Browse appliance brands
The appliance library still has the broadest brand coverage, so you can jump straight into the brand section if you already know the badge.
Brand
Bosch error codes
Error codes for Bosch dishwashers, washing machines, dryers, ovens and refrigerators with explanations, checks, and fixes.
Open guide
Brand
Samsung error codes
Error codes for Samsung washing machines, dryers, dishwashers and refrigerators with explanations, checks, and fixes.
Open guide
Brand
LG error codes
Error codes for LG washing machines, dryers, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Whirlpool error codes
Error codes for Whirlpool washing machines, dryers, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Maytag error codes
Error codes for Maytag washing machines, dryers, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
KitchenAid error codes
Error codes for KitchenAid dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
GE Appliances error codes
Error codes for GE Appliances washing machines, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Frigidaire error codes
Error codes for Frigidaire washing machines, dryers, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Electrolux error codes
Error codes for Electrolux washing machines, dryers, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Miele error codes
Error codes for Miele washing machines, dryers, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Haier error codes
Error codes for Haier washing machines, dishwashers and refrigerators with explanations, checks, and fixes.
Open guide
Brand
Thermador error codes
Error codes for Thermador dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Fisher & Paykel error codes
Error codes for Fisher & Paykel washing machines, dryers, dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide
Brand
Gaggenau error codes
Error codes for Gaggenau dishwashers, refrigerators and ovens with explanations, checks, and fixes.
Open guide