Samsung washing machine
Samsung washing machine error codes
Understand Samsung washing machine error codes with likely causes, safe first checks, and when to stop and arrange service.
Errors
20
High severity
5
Browse all 20 washing machine codes
See the full Samsung washing machine error code list with code, meaning, severity, and direct links to the detail pages.
Common Samsung washing machine codes
3C
Samsung Washing Machine Error 3C: Motor Error
The washer has detected a fault in the drum drive motor or its control circuit. The motor is not operating within expected parameters.
Open 3C guide
4C
Samsung Washer Error 4C: Washer Not Filling With Water
Samsung 4C usually means the washer is not getting enough incoming water to finish the fill on time.
Open 4C guide
4C2
Samsung Washing Machine Error 4C2: Hot and Cold Supply Hoses Reversed
The washer has detected that the cold water inlet is receiving extremely hot water — the hot and cold supply hoses have been swapped at installation.
Open 4C2 guide
5E
Samsung Washer Error 5E: Washer Not Draining Properly
Samsung 5E usually means the washer cannot drain water out of the drum fast enough to continue the cycle.
Open 5E guide
8E
Samsung Washing Machine Error 8E: MEMS Vibration Sensor Error
The washer has detected a fault in the MEMS (Micro-Electro-Mechanical System) vibration sensor. This sensor monitors drum vibration to detect imbalance and protect the machine during spin.
Open 8E guide
9C1
Samsung Washing Machine Error 9C1: Voltage Error — Irregular Power Supply
The washer has detected an irregularity in the voltage being supplied — it is either too high, too low, or fluctuating beyond safe operating limits.
Open 9C1 guide
Symptom entry points
Drain and standing water problems
- 5E - Samsung 5E usually means the washer cannot drain water out of the drum fast enough to continue the cycle.
- LC - The washer has detected an abnormal water level or moisture in the base of the machine, indicating either a leak or a water pressure sensor fault.
- OE - Samsung washer error OE usually means the machine thinks too much water is in the drum or the water-level reading is not correct.
Leaks, fill, and water-path issues
- 4C - Samsung 4C usually means the washer is not getting enough incoming water to finish the fill on time.
- 4C2 - The washer has detected that the cold water inlet is receiving extremely hot water — the hot and cold supply hoses have been swapped at installation.
- 5E - Samsung 5E usually means the washer cannot drain water out of the drum fast enough to continue the cycle.
Door, latch, and lock warnings
- 5E - Samsung 5E usually means the washer cannot drain water out of the drum fast enough to continue the cycle.
- ddC - On Samsung FlexWash models with a secondary Add Door (the small door for adding garments mid-cycle), the Add Door is not detected as properly closed and locked.
- dE - Samsung washer error dE usually means the machine does not think the door is closed or locked properly.
Model-family guidance
What can vary by model
- Samsung washing machine display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Some models may display the same fault as 3C, E3, 1 3C.
- Samsung washers can show 4C, nF, or 4E-family displays for the same basic no-fill condition depending on panel style.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Samsung washing machine error codes?
Start with the washing machine overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Samsung washing machine codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Samsung support or a qualified technician.
Which washing machine codes are covered in this section?
This Samsung washing machine section currently includes 3C, 4C, 4C2, 5E, 8E, 9C1, AE, bE2, Cb, CL, ddC, dE, dn, HC, LC, OE, SDC, SUd, tE, UE and related variants based on the current content set.