fixthiserror_

SAMSUNG AP

Samsung Dishwasher Error AP: Access Point Mode — Dishwasher in Wi-Fi Connection Mode

Clear meaning, realistic next steps, and safe guidance without turning the page into a long repair manual.

What it means

The dishwasher is in Wi-Fi Access Point mode, ready to be connected to the Samsung SmartThings app. AP is a mode indicator, not a fault. The dishwasher is broadcasting its own temporary Wi-Fi network so a phone can connect directly during setup.

Severity

Low - usually safe to check with basic user-accessible cleaning or inspection on the Samsung dishwasher.

Can you fix it yourself?

Yes — DIY-safe

Most likely cause

Wi-Fi connection mode was deliberately activated to pair the dishwasher with SmartThings

Estimated time for safe first checks: 1–5 min.

Step-by-Step DIY Fix Guide

  1. SAFETY: No electrical hazard — AP is a mode indicator, not a fault.
  2. If you want to connect to SmartThings: open the Samsung SmartThings app on your phone, tap Add Device, and follow the prompts to connect to the dishwasher's AP network.
  3. If AP appeared accidentally: press and hold the Wi-Fi button (or the button combination shown in your manual) for 3 seconds to exit AP mode.
  4. AP mode times out automatically after approximately 5 minutes if no connection is made.

If the code comes back

  • AP cannot be cleared by button press or power reset and persists across multiple power cycles

What This Error Means

Error AP on your Samsung dishwasher means: The dishwasher is in Wi-Fi Access Point mode, ready to be connected to the Samsung SmartThings app. AP is a mode indicator, not a fault. The dishwasher is broadcasting its own temporary Wi-Fi network so a phone can connect directly during setup. The dishwasher's self-diagnostic system has flagged this condition and may have paused the current cycle.

The most frequent cause is wi-fi connection mode was deliberately activated to pair the dishwasher with smartthings. Work through the causes and steps below before calling a technician.

Error AP is DIY-safe. Follow all steps in sequence — no tools required in most cases.

AP is a status indicator, not a fault code. The dishwasher is fully functional and is waiting for a Wi-Fi pairing connection. If you do not need to connect to SmartThings, simply press the Wi-Fi button to exit AP mode — or wait approximately 5 minutes and AP mode will time out automatically.

Most Likely Cause by Symptom

The Samsung dishwasher may stop, pause, or refuse to complete the cycle normally.

Likely cause: Wi-Fi connection mode was deliberately activated to pair the dishwasher with SmartThings

Check first: SAFETY: No electrical hazard — AP is a mode indicator, not a fault.

Common Causes

  • Wi-Fi connection mode was deliberately activated to pair the dishwasher with SmartThings
  • Wi-Fi setup button was pressed accidentally
  • SmartThings app initiated a re-pairing process

What Not to Do

  • Do not mistake AP for a fault code — the dishwasher is functioning normally in setup mode

Model and Display Variation Notes

Model-family notes

  • Samsung dishwasher display wording and code formats can vary by series.
  • If your model behaves differently, check the owner manual before trying any deeper maintenance step.

Display and panel differences

  • Panel wording can vary by series, so confirm the exact code pattern before buying parts.

Parts, Tools and Service Options

Common parts

  • Wi-Fi module if module is faulty and AP cannot be cleared ($30–$70)

Manual and model check

Check your exact model and manual before ordering any Samsung dishwasher parts.

Suggestions in this section are organized to support the troubleshooting flow first. Any future affiliate relationships should be disclosed clearly.

When Not to Keep Troubleshooting

AP cannot be cleared by button press or power reset and persists across multiple power cycles

How to Prevent It Recurring

  • Note the Wi-Fi connection button location on your model's control panel to avoid accidentally activating AP mode during normal use

Related Error Codes

Extra notes

  • This page is based on Samsung support material and stays conservative where model-specific guidance may vary.
  • The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.

Source and model notes

Last reviewed: 2026-04-08

Based on: Based on Samsung support material and edited into consumer-safe guidance for the exact code family on this page.

View Samsung US Official Support

Model coverage note: Samsung dishwasher code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.

Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.

Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.