Miele oven
Miele oven error codes
Find Miele oven and range error meanings with careful consumer-safe guidance for temperature, sensor, and control faults.
Errors
7
High severity
2
Browse all 7 oven codes
See the full Miele oven error code list with code, meaning, severity, and direct links to the detail pages.
Common Miele oven codes
F10
Miele Oven Error F10: Water Inlet Fault (Steam Oven)
The steam oven cannot draw water from the water container to generate steam. The water supply to the steam generator is insufficient or has been interrupted. This code applies to Miele steam ovens (DG/DGC series).
Open F10 guide
F11
Miele Oven Error F11: Water Cannot Drain from Steam Generator
The steam generator cannot empty its residual water after the cooking cycle. The drain path is blocked or the drain pump is unable to operate. This fault is common on steam ovens used with hard water that has not been descaled regularly. This code applies to Miele steam ovens (DG/DGC series).
Open F11 guide
F20
Miele Oven Error F20: Steam Oven Not Heating
The steam oven has failed to reach the required temperature during a steam or combination steam cooking cycle. The heating system is not operating correctly. This code applies to Miele steam ovens (DG/DGC series).
Open F20 guide
F31
Miele Oven Error F31: Cooktop Technical Fault
The cooktop has detected an internal technical fault in its electronic control system. The cooktop will not operate until the fault is resolved. This code applies to Miele induction and electric cooktops.
Open F31 guide
F94
Miele Oven Error F94: Float Switches Jammed in Water Container
The float switches in the water container are stuck in a position that gives the control system an incorrect water level reading. This typically occurs on Miele combination steam ovens (DGC series) when mineral deposits or debris prevent the floats from moving freely. This code applies to Miele steam ovens (DG/DGC series).
Open F94 guide
FE44
Miele Oven Error FE44: Cooktop Needs to Cool Down — Unsuitable Cookware Used
The cooktop's thermal protection circuit has triggered because the surface temperature exceeded safe limits. This is commonly caused by using non-induction-compatible cookware on an induction zone, or by operating a zone without a pot (ghost load). The cooktop will resume normal operation after it cools down. This code applies to Miele induction and electric cooktops.
Open FE44 guide
Symptom entry points
Drain and standing water problems
- F11 - The steam generator cannot empty its residual water after the cooking cycle. The drain path is blocked or the drain pump is unable to operate. This fault is common on steam ovens used with hard water that has not been descaled regularly. This code applies to Miele steam ovens (DG/DGC series).
Leaks, fill, and water-path issues
- F10 - The steam oven cannot draw water from the water container to generate steam. The water supply to the steam generator is insufficient or has been interrupted. This code applies to Miele steam ovens (DG/DGC series).
- F11 - The steam generator cannot empty its residual water after the cooking cycle. The drain path is blocked or the drain pump is unable to operate. This fault is common on steam ovens used with hard water that has not been descaled regularly. This code applies to Miele steam ovens (DG/DGC series).
- F20 - The steam oven has failed to reach the required temperature during a steam or combination steam cooking cycle. The heating system is not operating correctly. This code applies to Miele steam ovens (DG/DGC series).
Sensor and temperature faults
- F20 - The steam oven has failed to reach the required temperature during a steam or combination steam cooking cycle. The heating system is not operating correctly. This code applies to Miele steam ovens (DG/DGC series).
- F31 - The cooktop has detected an internal technical fault in its electronic control system. The cooktop will not operate until the fault is resolved. This code applies to Miele induction and electric cooktops.
Model-family guidance
What can vary by model
- Miele oven display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Some models may display the same fault as F31, FE31.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Miele oven error codes?
Start with the oven overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Miele oven codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Miele support or a qualified technician.
Which oven codes are covered in this section?
This Miele oven section currently includes F10, F11, F20, F31, F94, FE44, FE47 and related variants based on the current content set.