fixthiserror_

Full Error Code List

Haier washing machine error codes

Use this page when you already know the display code or want to compare Haier washing machine meanings quickly by severity.

How to use this list

Use the table to confirm the exact code, then open the detail guide for the safest first checks, model notes, and next-step options.

What the list is best for

  • Matching the exact display code before you act.
  • Comparing severity and meaning side by side.
  • Spotting closely related warnings that users often confuse.

What happens on the detail page

  • Quick answer and severity guidance.
  • Symptom-based first checks where the content supports it.
  • Model and display notes plus trust and source context.

Haier washing machine code table

Scan by code, meaning, and severity, then open the exact detail page when you need step-by-step guidance.

E1
The washer attempted to drain but could not empty the drum within the 4-minute drain window. The drain pump may be blocked, the drain hose kinked, or the pump motor has failed.
medium severity
E2
The washer attempted to lock the door before starting the cycle but did not receive confirmation that the lock engaged within 20 seconds. The machine will not run with an unconfirmed door lock.
medium severity
E3
The washer detected an issue during the spin cycle. The drum either cannot reach spin speed due to an unbalanced load or there is a mechanical problem with the drive system preventing normal spinning.
low severity
E4
The washer could not fill to the required water level within the allotted 8–12 minute fill window. Water is either not entering at all or entering too slowly to complete the fill on time.
medium severity
E8
The washer has detected that the water level inside the drum has risen above the maximum safe level. The machine has stopped to prevent an overflow and will attempt to drain automatically.
high severity
F7
The washer has detected a fault in the drum drive motor or motor control circuit. The motor is not operating within expected parameters and the machine cannot safely continue the cycle.
high severity
FA
The washer's water level pressure sensor has reported an abnormal reading that the control board cannot interpret as valid. The machine has stopped to prevent overfilling or incorrect cycle operation.
high severity
UNB
The washer detected that the laundry load is unevenly distributed in the drum. The machine has paused the spin cycle to protect the drum and bearings from damage caused by excessive vibration.
low severity

Common symptom shortcuts

These clusters give users another way into the list when they know the symptom but not the code.

Drain and standing water problems

  • E1 - The washer attempted to drain but could not empty the drum within the 4-minute drain window. The drain pump may be blocked, the drain hose kinked, or the pump motor has failed.
  • E8 - The washer has detected that the water level inside the drum has risen above the maximum safe level. The machine has stopped to prevent an overflow and will attempt to drain automatically.

Leaks, fill, and water-path issues

  • E1 - The washer attempted to drain but could not empty the drum within the 4-minute drain window. The drain pump may be blocked, the drain hose kinked, or the pump motor has failed.
  • E4 - The washer could not fill to the required water level within the allotted 8–12 minute fill window. Water is either not entering at all or entering too slowly to complete the fill on time.
  • E8 - The washer has detected that the water level inside the drum has risen above the maximum safe level. The machine has stopped to prevent an overflow and will attempt to drain automatically.

Door, latch, and lock warnings

  • E2 - The washer attempted to lock the door before starting the cycle but did not receive confirmation that the lock engaged within 20 seconds. The machine will not run with an unconfirmed door lock.
  • E3 - The washer detected an issue during the spin cycle. The drum either cannot reach spin speed due to an unbalanced load or there is a mechanical problem with the drive system preventing normal spinning.
  • E8 - The washer has detected that the water level inside the drum has risen above the maximum safe level. The machine has stopped to prevent an overflow and will attempt to drain automatically.

Common guides to open next

E1 fix guide

E1 - The washer attempted to drain but could not empty the drum within the 4-minute drain window. The drain pump may be blocked, the drain hose kinked, or the pump motor has failed.

E2 fix guide

E2 - The washer attempted to lock the door before starting the cycle but did not receive confirmation that the lock engaged within 20 seconds. The machine will not run with an unconfirmed door lock.

E3 fix guide

E3 - The washer detected an issue during the spin cycle. The drum either cannot reach spin speed due to an unbalanced load or there is a mechanical problem with the drive system preventing normal spinning.

E4 fix guide

E4 - The washer could not fill to the required water level within the allotted 8–12 minute fill window. Water is either not entering at all or entering too slowly to complete the fill on time.