GE Appliances dishwasher
GE Appliances dishwasher error codes
Find GE Appliances dishwasher error code meanings, likely causes, and safe first-step guidance for drain, leak, and fill issues.
Errors
13
High severity
3
Browse all 13 dishwasher codes
See the full GE Appliances dishwasher error code list with code, meaning, severity, and direct links to the detail pages.
Common GE Appliances dishwasher codes
C1
GE Appliances Dishwasher Error C1: Drain Pump Running Too Long
The drain pump has been running continuously for more than 2 minutes without the water level dropping as expected. The dishwasher has stopped the pump to prevent motor burnout.
Open C1 guide
C2
GE Appliances Dishwasher Error C2: Total Drain Cycle Exceeds 7 Minutes
The cumulative pump-out time across the entire wash cycle has exceeded 7 minutes. This indicates a persistent drainage restriction that is causing repeated drain attempts without fully clearing the tub.
Open C2 guide
C3
GE Dishwasher Error C3: Dishwasher Will Not Drain
GE dishwasher error C3 usually means the machine did not drain water from the tub during the normal drain phase.
Open C3 guide
C4
GE Appliances Dishwasher Error C4: Float Switch Stuck or Clogged Drain After Power Failure
After a power interruption, the dishwasher filled twice without completing a drain. This indicates either the float switch (overflow protection) is stuck in the raised position, or a blocked drain is preventing water from clearing between fills.
Open C4 guide
C5
GE Appliances Dishwasher Error C5: Pump-Out Time Too Short
The drain cycle completed in less time than expected, suggesting the pump ran but water did not fully drain — possibly due to a partial obstruction or the drain hose being too short or improperly routed.
Open C5 guide
C6
GE Appliances Dishwasher Error C6: Water Temperature Too Low
The water entering the dishwasher is below the minimum temperature required for effective washing and sanitizing. The dishwasher may delay the cycle or extend the wash phase while heating the water.
Open C6 guide
Symptom entry points
Drain and standing water problems
- C1 - The drain pump has been running continuously for more than 2 minutes without the water level dropping as expected. The dishwasher has stopped the pump to prevent motor burnout.
- C2 - The cumulative pump-out time across the entire wash cycle has exceeded 7 minutes. This indicates a persistent drainage restriction that is causing repeated drain attempts without fully clearing the tub.
- C3 - GE dishwasher error C3 usually means the machine did not drain water from the tub during the normal drain phase.
Leaks, fill, and water-path issues
- C1 - The drain pump has been running continuously for more than 2 minutes without the water level dropping as expected. The dishwasher has stopped the pump to prevent motor burnout.
- C2 - The cumulative pump-out time across the entire wash cycle has exceeded 7 minutes. This indicates a persistent drainage restriction that is causing repeated drain attempts without fully clearing the tub.
- C3 - GE dishwasher error C3 usually means the machine did not drain water from the tub during the normal drain phase.
Door, latch, and lock warnings
- C8 - The detergent dispenser door failed to open at the scheduled point in the wash cycle. Detergent was not released into the wash, meaning dishes were washed with plain water.
- LEAK - The dishwasher's leak detector has sensed moisture in the base of the appliance, indicating a water leak somewhere in the machine. The dishwasher has stopped the cycle and activated the drain pump to remove water from the base.
Model-family guidance
What can vary by model
- GE Appliances dishwasher display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- GE dishwasher drain layouts vary slightly by series, but the filter, sump, and sink-side hose path are still the first practical checks.
- Recent disposal or plumbing work should always raise suspicion about the knockout plug or hose routing.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with GE Appliances dishwasher error codes?
Start with the dishwasher overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all GE Appliances dishwasher codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact GE Appliances support or a qualified technician.
Which dishwasher codes are covered in this section?
This GE Appliances dishwasher section currently includes C1, C2, C3, C4, C5, C6, C7, C8, FTD, H2O, LEAK, PF, PrS and related variants based on the current content set.