Frigidaire washing machine
Frigidaire washing machine error codes
Understand Frigidaire washing machine error codes with likely causes, safe first checks, and clear next steps when the warning keeps returning.
Errors
21
High severity
4
Browse all 21 washing machine codes
See the full Frigidaire washing machine error code list with code, meaning, severity, and direct links to the detail pages.
Common Frigidaire washing machine codes
E1
Frigidaire Washing Machine Error E1: Slow or No Water Fill
The top-load washer did not fill to the required water level within the allotted time. The machine detected inadequate water flow and paused the cycle to protect the motor and heating elements from running dry.
Open E1 guide
E2
Frigidaire Washing Machine Error E2: Water Drainage Too Slow
The top-load washer detected that water is draining more slowly than expected. The cycle pauses to prevent overflowing or running the next phase without an empty drum.
Open E2 guide
E3
Frigidaire Washing Machine Error E3: Lid Open or Lid Lock Failed
The top-load washer's control board cannot confirm that the lid is closed and locked. The lid must lock before the spin cycle can begin for operator safety. E3 appears when the lock does not engage within the expected time.
Open E3 guide
E4
Frigidaire Washing Machine Error E4: Unbalanced Load During Spin
The top-load washer detected that the laundry load is unevenly distributed in the drum during spin. Excessive vibration from an unbalanced load can damage the machine — the washer pauses spin to protect itself.
Open E4 guide
E5
Frigidaire Washing Machine Error E5: Washer Not Level
The top-load washer has detected that it is not sitting level, which prevents the drum from balancing correctly during spin. E5 is often triggered alongside E4 when the leveling issue is severe.
Open E5 guide
E11
Frigidaire Washer Error E11: Fill Time Too Long
Frigidaire washer error E11 usually means the machine is not getting enough incoming water to reach the required level in time.
Open E11 guide
Symptom entry points
Drain and standing water problems
- E2 - The top-load washer detected that water is draining more slowly than expected. The cycle pauses to prevent overflowing or running the next phase without an empty drum.
- E13 - The front-load washer's pressure sensor has detected water where it should not be — either a leak from the main tub into the base of the machine, or an air leak in the air bell (pressure sensor hose) that is giving false low-water readings. E13 is a high-severity fault that should be investigated promptly.
- E21 - Frigidaire washer error E21 usually means the machine is draining, but not fast enough to empty the drum normally.
Leaks, fill, and water-path issues
- E1 - The top-load washer did not fill to the required water level within the allotted time. The machine detected inadequate water flow and paused the cycle to protect the motor and heating elements from running dry.
- E2 - The top-load washer detected that water is draining more slowly than expected. The cycle pauses to prevent overflowing or running the next phase without an empty drum.
- E11 - Frigidaire washer error E11 usually means the machine is not getting enough incoming water to reach the required level in time.
Door, latch, and lock warnings
- E3 - The top-load washer's control board cannot confirm that the lid is closed and locked. The lid must lock before the spin cycle can begin for operator safety. E3 appears when the lock does not engage within the expected time.
- E4 - The top-load washer detected that the laundry load is unevenly distributed in the drum during spin. Excessive vibration from an unbalanced load can damage the machine — the washer pauses spin to protect itself.
- E13 - The front-load washer's pressure sensor has detected water where it should not be — either a leak from the main tub into the base of the machine, or an air leak in the air bell (pressure sensor hose) that is giving false low-water readings. E13 is a high-severity fault that should be investigated promptly.
Model-family guidance
What can vary by model
- Frigidaire washing machine display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Frigidaire front-load washers monitor fill timing closely, so even a partly restricted hose or screen can trigger E11.
- Some households only see the code when another fixture is using water at the same time.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Frigidaire washing machine error codes?
Start with the washing machine overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Frigidaire washing machine codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Frigidaire support or a qualified technician.
Which washing machine codes are covered in this section?
This Frigidaire washing machine section currently includes E1, E2, E3, E4, E5, E11, E13, E21, E23, E35, E41, E42, E52, E55, E59, E75, E95, EF1, EF2, F2, FD and related variants based on the current content set.