Fisher & Paykel washing machine
Fisher & Paykel washing machine error codes
Understand Fisher & Paykel washing machine error codes with likely causes, safe first checks, and clear next steps when the warning keeps returning.
Errors
10
High severity
3
Browse all 10 washing machine codes
See the full Fisher & Paykel washing machine error code list with code, meaning, severity, and direct links to the detail pages.
Common Fisher & Paykel washing machine codes
F01
Fisher & Paykel Washing Machine Error Code F01: Electronic Control Board Fault
The washer has detected an internal fault with the electronic control board. This code points to a problem with the main circuit board that controls the wash cycle, and cannot be resolved by the user.
Open F01 guide
F02
Fisher & Paykel Washing Machine Error Code F02: Motor Circuit Fault
The washer has detected a fault in the motor circuit. This indicates an electrical problem between the control board and the drive motor, or a failure of the motor itself.
Open F02 guide
F03
Fisher & Paykel Washing Machine Error Code F03: Temperature Sensor (Thermistor) Fault
The washer's temperature sensor (thermistor) has reported a reading outside the expected range. The washer cannot accurately monitor water temperature, which prevents heated wash cycles from completing safely.
Open F03 guide
F04
Fisher & Paykel Washing Machine Error Code F04: Motor Fault
The washer has detected a direct fault with the drive motor. The motor is not responding correctly to control commands, which may prevent the drum from spinning or agitating.
Open F04 guide
F05
Fisher & Paykel Washing Machine Error Code F05: Drain Blocked or Pump Issue
The washer cannot drain water within the expected time. This is most commonly caused by a blockage in the drain filter or hose rather than a pump failure, making it one of the more user-fixable Fisher & Paykel fault codes.
Open F05 guide
F06
Fisher & Paykel Washing Machine Error Code F06: Door Lock Fault
The washer cannot confirm that the door is properly locked. The door lock mechanism is a safety device — the washer will not spin or agitate unless the door is securely locked.
Open F06 guide
Symptom entry points
Drain and standing water problems
- F05 - The washer cannot drain water within the expected time. This is most commonly caused by a blockage in the drain filter or hose rather than a pump failure, making it one of the more user-fixable Fisher & Paykel fault codes.
Leaks, fill, and water-path issues
- F03 - The washer's temperature sensor (thermistor) has reported a reading outside the expected range. The washer cannot accurately monitor water temperature, which prevents heated wash cycles from completing safely.
- F05 - The washer cannot drain water within the expected time. This is most commonly caused by a blockage in the drain filter or hose rather than a pump failure, making it one of the more user-fixable Fisher & Paykel fault codes.
- no tAP - The washer is not receiving water from the household supply. The display variants indicate which supply is affected: 'no tAP' means no water at all, 'no hot' means the hot supply is absent, and 'no Cld' means cold water is missing. All require checking the supply connections.
Door, latch, and lock warnings
- F06 - The washer cannot confirm that the door is properly locked. The door lock mechanism is a safety device — the washer will not spin or agitate unless the door is securely locked.
Model-family guidance
What can vary by model
- Fisher & Paykel washing machine display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
- Some models may display the same fault as no tAP, no hot, no Cld.
- Some models may display the same fault as out oF bAL, out of balance.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Fisher & Paykel washing machine error codes?
Start with the washing machine overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Fisher & Paykel washing machine codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Fisher & Paykel support or a qualified technician.
Which washing machine codes are covered in this section?
This Fisher & Paykel washing machine section currently includes F01, F02, F03, F04, F05, F06, no tAP, out oF bAL, Sud LOC, too FUL and related variants based on the current content set.