Bosch dryer
Bosch dryer error codes
Browse Bosch dryer error codes and see practical, non-invasive checks for airflow, setup, and electronics warnings.
Errors
9
High severity
7
Browse all 9 dryer codes
See the full Bosch dryer error code list with code, meaning, severity, and direct links to the detail pages.
Common Bosch dryer codes
E01
Bosch Dryer Error Code E01
The dryer may be detecting an airflow, filter, or setup-related problem.
Open E01 guide
E02
Bosch Dryer Error E02: Lint Filter Blocked — Needs Cleaning (E02 Variant)
Same as E01 — the lint filter is blocked and restricting airflow. E02 is a variant of the same fault on certain Bosch dryer models.
Open E02 guide
E06
Bosch Dryer Error E06: Heating Circuit Fault
A fault has been detected in the dryer's heating circuit. The dryer cannot generate the heat required to dry laundry.
Open E06 guide
E08
Bosch Dryer Error E08: Electronics Fault — NTC Temperature Sensor
The dryer has detected an electronics fault in the NTC (negative temperature coefficient) sensor circuit. The NTC sensor monitors drum or exhaust temperature to control the heating cycle.
Open E08 guide
E09
Bosch Dryer Error E09: Electronics Fault — Control Unit
The dryer has detected an electronics fault in the main control unit. The control board manages all dryer functions and has reported a critical error.
Open E09 guide
E24
Bosch Dryer Error E24: Electronics Fault — Drum Temperature Sensor
The dryer has detected a fault in the drum temperature sensor circuit. This sensor monitors heat inside the drum and regulates the heating cycle.
Open E24 guide
Symptom entry points
Drain and standing water problems
- E02 - Same as E01 — the lint filter is blocked and restricting airflow. E02 is a variant of the same fault on certain Bosch dryer models.
Sensor and temperature faults
- E06 - A fault has been detected in the dryer's heating circuit. The dryer cannot generate the heat required to dry laundry.
- E08 - The dryer has detected an electronics fault in the NTC (negative temperature coefficient) sensor circuit. The NTC sensor monitors drum or exhaust temperature to control the heating cycle.
- E24 - The dryer has detected a fault in the drum temperature sensor circuit. This sensor monitors heat inside the drum and regulates the heating cycle.
Control board and electronics warnings
- E06 - A fault has been detected in the dryer's heating circuit. The dryer cannot generate the heat required to dry laundry.
- E08 - The dryer has detected an electronics fault in the NTC (negative temperature coefficient) sensor circuit. The NTC sensor monitors drum or exhaust temperature to control the heating cycle.
- E09 - The dryer has detected an electronics fault in the main control unit. The control board manages all dryer functions and has reported a critical error.
Model-family guidance
What can vary by model
- Bosch dryer display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
Frequently asked questions
Appliance-level FAQs add supporting context without forcing users into long-form content.
Where should I start with Bosch dryer error codes?
Start with the dryer overview page, then use the full error code list or open the code that matches your display. Each page gives a quick meaning, safe checks, and escalation guidance.
Are all Bosch dryer codes the same across models?
Not always. Meanings can vary by series or model, so the guidance here stays conservative and recommends checking the manual for model-specific wording.
When should I stop troubleshooting and contact support?
If the same warning returns, the appliance is leaking, will not run safely, or the next step would require invasive work, it is best to turn it off and contact Bosch support or a qualified technician.
Which dryer codes are covered in this section?
This Bosch dryer section currently includes E01, E02, E06, E08, E09, E24, E25, E28, E90 and related variants based on the current content set.