Step-by-Step DIY Fix Guide
- SAFETY: Disconnect power at the breaker.
- Reset power for 30 seconds, then restore.
- If E03 returns, schedule service — this is a control board fault.
If the warning comes back after restart
- If airflow still seems weak after the basic checks, the fan path or a deeper obstruction becomes more likely.
- If the warning returns immediately after a clean restart, the sensor or wiring path becomes more likely than a one-time glitch.
- Any recurrence after power reset — schedule service immediately
What This Error Means
Error code E03 on your Bosch dishwasher indicates: There is a main control board relay fault/error. The appliance detects this condition through its built-in sensors and halts the current cycle to prevent further damage. Depending on the model, the code may flash on the display panel, appear on a digital readout, or cause the status lights to blink in a specific sequence. The dishwasher will not resume normal operation until the underlying fault is resolved.
The most frequent cause of error E03 is secondary relay failure on the main control board. When this happens, the dishwasher's control board detects the abnormal sensor reading or motor response and triggers the fault code as a protective measure. Other contributing factors are listed in the causes section below — working through them in order is the fastest path to a fix.
Bosch's official service guidance classifies E03 as a technician-only repair. The components involved are part of the sealed electronics system and require specialized diagnostic equipment to test safely. Attempting to disassemble these components yourself risks further damage and may void any remaining warranty. Contact Bosch Customer Service or a certified appliance technician.
The dishwasher will display E03 and refuse to start or continue a cycle until the fault is resolved. If the code appeared mid-cycle, there may be water standing in the tub — which is normal for this fault type. Do not attempt to restart the appliance without working through the troubleshooting steps below first.
Most Likely Cause by Symptom
The Bosch dishwasher may stop, pause, or refuse to complete the cycle normally.
Likely cause: Secondary relay failure on the main control board
Check first: SAFETY: Disconnect power at the breaker.
The warning may return immediately because the appliance is detecting an internal fault.
Likely cause: Short circuit in control board circuitry
Check first: Reset power for 30 seconds, then restore.
Common Causes
- Secondary relay failure on the main control board
- Short circuit in control board circuitry
- Manufacturing defect (check if unit is under warranty)
What Not to Do
- Do not attempt to disassemble internal electronics or sealed system components
- Do not bypass or ignore this error and continue running cycles
Model and Display Variation Notes
Model-family notes
- Bosch dishwasher display wording and code formats can vary by series.
- If your model behaves differently, check the owner manual before trying any deeper maintenance step.
Display and panel differences
- Panel wording can vary by series, so confirm the exact code pattern before buying parts.
Parts, Tools and Service Options
Service option
Bosch service visit if the warning returns after the basic checks are complete.
Manual and model check
Check your exact model and manual before ordering any Bosch dishwasher parts.
Common parts
- Main control board ($180–$320)
This section stays service-first because the page points more strongly toward support or professional repair than a routine parts purchase.
When Not to Keep Troubleshooting
Any recurrence after power reset — schedule service immediately
How to Prevent It Recurring
- Use a surge protector on the dishwasher outlet
Related Error Codes
Extra notes
- This page is based on Bosch support material and stays conservative where model-specific guidance may vary.
- The goal is to help you identify safe first checks before you move into parts, service, or model-specific manual lookup.
Source and model notes
Last reviewed: 2026-04-07
Based on: Based on Bosch support material and edited into consumer-safe guidance for the exact code family on this page.
Model coverage note: Bosch dishwasher code meanings can vary by series, control panel, and model family, so use this page as a safe starting point rather than a replacement for the model-specific manual.
Important: FixThisError is an independent guide, not the manufacturer. Use your model-specific manual when the panel wording or behavior differs.
Always disconnect power before inspecting appliances. If unsure, contact a licensed appliance technician.